Vue 2006-2007

Lower Ball Joints

Print

Removal & Installation



  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove the lower control arm from the vehicle.
  4.  
  5. Remove the rivets retaining the ball joint to the control arm using a 5 / 16 in. (8mm) drill bit.
  6.  
  7. Remove the ball joint from the control arm
  8.  

To install:

  1. Install the ball joint into the control arm.
  2.  
  3. Install the nuts and bolts (included with new ball joint kit) as shown and torque them to 50 ft. lbs. (68 Nm).
  4.  
  5. Install the control arm to the vehicle.

    Click image to see an enlarged view

    Fig. The new ball stud is bolted into the control arm

  6.  

 
label.common.footer.alt.autozoneLogo