Log In
Search suggestions

    My Vehicles

    1995 Ford Crown Victoria 4.6L SFI 8cyl

    My Store

    1720 S RIDGEWOOD A
    (386) 427-1210

    OPEN 'til 9:00 PM today

    GET A $25 GIFT CARD FOR EVERY $100 SPENT ON ONLINE SHIP-TO-HOME ORDERS.

    Use Code: GIFTME

    See Details

    Ford Taurus/Sable 1986-1995 Repair Information

    Wiper Linkage

    Print

    REMOVAL & INSTALLATION



    See Figure 1

    1. Disconnect the negative battery cable.
    2.  
    3. Remove the wiper pivot arm and blade assembly from the wiper mounting arm and pivot shafts.
    4.  
    5. Remove both the right and left cowl vent screens.
    6.  
    7. Disconnect the linkage drive arm/windshield wiper mounting arm and pivot shaft from the motor crank pin after removing the clip.
    8.  
    9. Remove the screws/bolts retaining the windshield wiper mounting arm and pivot shafts to the cowl. Remove the linkage/wiper mounting arm and pivot shafts from the cowl chamber.
    10.  



    Click image to see an enlarged view

    Fig. Fig. 1: Location and mounting of the windshield wiper linkage

    To install:
    1. Install the linkage/wiper mounting arm and pivot shafts in the cowl chamber, then secure using the retaining screws/bolts.
    2.  
    3. Connect the linkage drive arm/wiper mounting arm and pivot shaft to the motor crank pin, then install the clip.
    4.  
    5. Install the left and right side cowl vent screens.
    6.  
    7. Install the wiper pivot arm and blade assembly to the wiper arm mounting arm and pivot shafts.
    8.  
    9. Connect the negative battery cable.
    10.  

     
    AutoZone Logo