Yaris 2007

Removal & Installation

Print

Hatchback



Specific to:

Toyota Yaris 2007-2010

  1. Disconnect the negative battery cable.
  2.  
  3. Remove instrument panel finish panel end LH and RH.
  4.  
  5. Remove instrument cluster finish panel no.1.
  6.  
  7. Remove instrument cluster finish panel sub-assembly center:
    1. Disengage the 2 claws and 4 clips and remove the instrument cluster finish panel center.
    2.  
    3. Grip the rib portion of the instrument cluster finish panel center by hand to remove it.
    4.  
    5. To avoid breakage of the instrument cluster finish panel center when removing it, do not apply excessive force to the register or pull out the rink or panel portions.

      Click image to see an enlarged view

      Fig. Grip the rib portion of the instrument cluster finish panel center by hand to remove it

    6.  

  8.  
  9. Remove air conditioning panel assembly:
    1. Disengage the 3 clips and 2 claws and remove the air conditioning panel.
    2.  
    3. Disconnect the 3 connectors and the clamp.
    4.  

  10.  
  11. To install, reverse the removal procedure.

    Click image to see an enlarged view

    Fig. Disengage the 3 clips and 2 claws and remove the air conditioning panel



    Click image to see an enlarged view

    Fig. Disconnect the 3 connectors and the clamp



    Click image to see an enlarged view

    Fig. View of the control panel-Hatchback

  12.  

Sedan



Specific to:

Toyota Yaris 2007-2010

  1. Disconnect the negative battery cable.
  2.  
  3. Remove instrument panel finish panel end LH and RH.
  4.  
  5. Remove instrument cluster finish panel no.1.
  6.  
  7. Remove instrument cluster finish panel sub-assembly center:
  8.  
  9. Disengage the 2 claws and 4 clips and remove the instrument cluster finish panel center.

    Click image to see an enlarged view

    Fig. Disengage the 2 claws and 4 clips and remove the instrument cluster finish panel center

  10.  
  11. Remove air conditioning panel assembly:
    1. Disengage the 4 clips and 2 claws and remove the air conditioning panel.
    2.  
    3. Disconnect the 3 connectors and 4 clamps.
    4.  

  12.  
  13. To install, reverse the removal procedure.

    Click image to see an enlarged view

    Fig. Disengage the 4 clips and 2 claws and remove the air conditioning panel



    Click image to see an enlarged view

    Fig. Disconnect the 3 connectors and 4 clamps



    Click image to see an enlarged view

    Fig. View of the control panel-Sedan

  14.  

 
label.common.footer.alt.autozoneLogo