Yaris 2007

Electric Engine Fan

Print

Fan Control Relay



Testing


Click image to see an enlarged view

Fig. Cooling fan relay testing

Fan Resistor



Location

Specific to:

Toyota Yaris 2007-2010



Click image to see an enlarged view

Fig. Locating the cooling fan resistor

Removal & Installation

Specific to:

Toyota Yaris 2007-2010

  1. Disconnect the negative battery cable.
  2.  
  3. Remove front wheel LH.
  4.  
  5. Remove front fender liner LH.
  6.  
  7. Disconnect the connector from the cooling fan resistor.
  8.  
  9. Remove the 2 bolts and the cooling fan resistor.
  10.  
  11. To install, reverse the removal procedure.
  12.  
  13. Tighten the bolts to 45 inch lbs. (5 Nm).

    Click image to see an enlarged view

    Fig. Removing the cooling fan resistor

  14.  

Testing

Specific to:

Toyota Yaris 2007-2010

Using an ohmmeter, measure the resistance between the terminals. Standard resistance: 1.17 to 1.43 - at 68°F (20°C).

Click image to see an enlarged view

Fig. Identifying the cooling fan resistor pin connector

 
label.common.footer.alt.autozoneLogo