Yaris 2007

Air Intake System

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Separate the intake air flow meter connector and the wire harness clamp.
  4.  
  5. Separate the fuel vapor feed hose and fuel vapor feed hose No. 1 from the vacuum switching valve assembly.
  6.  
  7. Separate the vacuum switching valve connector and the wire harness clamp.
  8.  
  9. Separate the ventilation hose from the air cleaner hose.
  10.  
  11. Release the air cleaner cap sub-assembly with air cleaner hose No. 1.
  12.  
  13. Loosen the air cleaner hose clamp on the throttle body side and remove the air cleaner cap and the air cleaner hose.

    Click image to see an enlarged view

    Fig. Removing the air cleaner components

  14.  
  15. Remove the air cleaner element.
  16.  
  17. Separate the wire harness clamp from the air cleaner case.
  18.  
  19. Remove the 2 bolts and remove the air cleaner case with air cleaner inlet No. 1.
  20.  
  21. Separate the wire harness clamp from the air cleaner bracket.
  22.  
  23. Remove the 2 bolts and remove the air cleaner bracket.
  24.  
  25. To install, reverse the removal procedure.

    Click image to see an enlarged view

    Fig. View of the air cleaner assembly

  26.  

 
label.common.footer.alt.autozoneLogo