Yaris 2007

Mirrors

Print

Power Mirrors



Diagnosis & Testing
Mirror

Specific to:

Toyota Yaris 2007-2009



Click image to see an enlarged view

Fig. Testing the mirror assembly-1 of 2



Click image to see an enlarged view

Fig. Testing the mirror assembly-2 of 2

Switch

Specific to:

Toyota Yaris 2007-2009



Click image to see an enlarged view

Fig. Testing the switch assembly-Hatchback models



Click image to see an enlarged view

Fig. Testing the switch assembly-Sedan models

Removal & Installation
Mirror Motor

Specific to:

Toyota Yaris 2007-2009

  1. Disconnect the negative battery cable.
  2.  
  3. Remove the front door trim.
  4.  
  5. Remove outer rear view mirror assembly:
    1. With power mirror: Disconnect the connector.
    2.  
    3. Remove the 3 nuts, disengage the claw and remove the outer rear view mirror.
    4.  

  6.  
  7. Remove outer mirror cover:
    1. Apply protective tape to the lower part of the mirror body.
    2.  
    3. Press down the upper part of the mirror and tilt the mirror.
    4.  
    5. Insert a molding remover into the 2 clip installation positions on the lower part of the mirror to disengage the 2 clips.
    6.  
    7. Remove the mirror by pulling it downward.
    8.  
    9. Disengage the 4 claws from the inside of the mirror body.
    10.  
    11. Push the upper part of the mirror cover forward to tilt it, and then disengage the claw on the lower part to remove the outer mirror cover.
    12.  

  8.  
  9. To install, reverse the removal procedure.

    Click image to see an enlarged view

    Fig. Exploded view of the power mirror and related components-Hatchback models



    Click image to see an enlarged view

    Fig. Exploded view of the power mirror and related components-Sedan models

  10.  

Mirror Switch

Specific to:

Toyota Yaris 2007-2009

  1. Disconnect the negative battery cable.
  2.  
  3. Remove instrument panel box:
    1. Open the instrument panel box.
    2.  
    3. Pull the hinge side of the instrument panel box out horizontally with the instrument panel open and disengage the 2 hinges.
    4.  
    5. Remove the stopper of the instrument panel box from the cutout of the instrument panel lower and remove the instrument panel box.
    6.  

  4.  
  5. Remove outer mirror switch assembly:
    1. Disconnect the connector.
    2.  
    3. Disengage the 2 claws and remove the outer mirror switch.
    4.  

  6.  
  7. To install, reverse the removal procedure.

    Click image to see an enlarged view

    Fig. Removing the mirror switch

  8.  

 
label.common.footer.alt.autozoneLogo