Drain & Refill
- Remove the filler plug and the gasket.
- Remove the drain plug and the gasket, and then drain the manual transaxle oil.
Add fluid. Check that the oil surface is within 0.20 inches (5 mm) of the bottom of the transmission filler plug opening.
NOTEExcessively large or small amounts of oil may cause problems. After replacing the oil, drive the vehicle and check the oil level again.
- Check for oil leakage when the oil level is low.
- Install a new gasket and the drain plug. Tighten to 29 ft. lbs. (39 Nm).