Yaris 2007

Panels & Trim

Print

Removal & Installation



Door Panel
Front Door
Sedan Models
  1. Disconnect the negative battery cable.
  2.  
  3. Remove front door window regulator handle assembly (without power window):
    1. Insert a clip remover between the plate and door trim.
    2.  
    3. Turn the handle counter clockwise with the clip remover inserted.
    4.  
    5. Remove the front door window regulator handle and clip.
    6.  
    7. Remove the window regulator handle plate.
    8.  

  4.  
  5. Disengage the claw and clip and remove the front door lower frame bracket garnish.
  6.  
  7. Remove front armrest base upper panel:
    1. For driver side with power window:

      Remove the screw.
       
      Disengage the 7 claws and 2 clips and remove the front armrest base upper panel.
       
      Disconnect the connector.
       

    2.  
    3. For front passenger side with power window:

      Remove the screw.
       
      Disengage the 7 claws and 2 clips and remove the front armrest base upper panel.
       
      Disconnect the connector.
       

    4.  
    5. Without Power window:

      Remove the screw.
       
      Disengage the 5 claws and 2 clips and remove the front armrest base upper panel.
       

    6.  

  8.  
  9. Remove the 3 screws and the power window regulator master switch.
  10.  
  11. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the power window regulator switch.
  12.  
  13. Using a screwdriver with its tip wrapped in protective tape, disengage the 2 claws and remove the door control switch.
  14.  
  15. Remove front door trim board sub-assembly:
    1. With power window:

      Remove the screw.
       
      Disengage the 9 clips
       
      Disconnect the front door lock remote control cable and front door inside locking cable and remove the front door trim board
       

    2.  
    3. Without Power window:

      Remove the screw.
       
      Disengage the 9 clips.
       
      Disconnect the front door lock remote control cable and front door inside locking cable and remove the front door trim board.
       

    4.  

  16.  
  17. Using a screwdriver with its tip wrapped in protective tape, disengage the 4 claws and remove the front door inside handle.
  18.  
  19. To install, reverse the removal procedure.

    Click image to see an enlarged view

    Fig. Exploded view of the front door trim-Sedan-With power windows



    Click image to see an enlarged view

    Fig. Exploded view of the front door trim-Sedan-Without power windows

  20.  

Hatchback Models
With Power Windows

Specific to:

Toyota Yaris 2007-2009

  1. Disconnect the negative battery cable.
  2.  
  3. For 5 Door: Using a screwdriver with its tip wrapped in protective tape, disengage the 8 claws and 3 clips and remove the door armrest cover.
  4.  
  5. For 3 Door: Disengage the 12 claws and 4 clips and remove the door armrest cover.
  6.  
  7. Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws and clip and remove the front armrest base panel upper.
  8.  
  9. Disconnect the connector.
  10.  
  11. Remove the 3 screws and the power window regulator master switch.
  12.  
  13. Disengage the 2 claws and remove the power window regulator switch.
  14.  
  15. Remove front door trim board sub-assembly:
    1. Remove the 4 screws.
    2.  
    3. 5 Door: Disengage the 8 clips.
    4.  
    5. 3 Door: Disengage the 9 clips.
    6.  
    7. Disconnect the front door lock remote control cable and front door inside locking cable and remove the front door trim board.
    8.  

  16.  
  17. Disengage the 6 claws and remove the front door inside handle.
  18.  
  19. To install, reverse the removal procedure.

    Click image to see an enlarged view

    Fig. Exploded view of the front door trim-Hatchback-With power windows

  20.  

Without Power Windows

Specific to:

Toyota Yaris 2007-2009

  1. Disconnect the negative battery cable.
  2.  
  3. For 5 Door: Using a screwdriver with its tip wrapped in protective tape, disengage the 8 claws and 3 clips and remove the door armrest cover.
  4.  
  5. For 3 Door: Disengage the 12 claws and 4 clips and remove the door armrest cover.
  6.  
  7. Using a screwdriver with its tip wrapped in protective tape, disengage the 5 claws and clip and remove the front armrest base panel upper.
  8.  
  9. Remove front door trim board sub-assembly:
    1. Remove the 4 screws.
    2.  
    3. 5 Door: Disengage the 8 clips.
    4.  
    5. 3 Door: Disengage the 9 clips.
    6.  
    7. Disconnect the front door lock remote control cable and front door inside locking cable and remove the front door trim board.
    8.  

  10.  
  11. Disengage the 6 claws and remove the front door inside handle.
  12.  
  13. To install, reverse the removal procedure.

    Click image to see an enlarged view

    Fig. Exploded view of the front door trim-Hatchback-Without power windows

  14.  

Rear Door Panels
Sedan Models
  1. Disconnect the negative battery cable.
  2.  
  3. Remove rear door window regulator handle assembly (without power window):]
    1. Insert a clip remover between the plate and door trim.
    2.  
    3. Turn the handle counter clockwise with the clip remover inserted.
    4.  
    5. Remove the rear door window regulator handle assembly and clip.
    6.  
    7. Remove the window regulator handle plate.
    8.  

  4.  
  5. Remove rear door armrest base upper panel (without power window):
    1. Remove the screw.
    2.  
    3. Disengage the 4 claws and remove the rear door armrest base upper panel.
    4.  

  6.  
  7. Remove rear door armrest base upper panel (with power window):
    1. Remove the screw.
    2.  
    3. Disengage the 7 claws and 2 clips and remove the rear door armrest base upper panel.
    4.  
    5. Disconnect the connector.
    6.  

  8.  
  9. Remove rear door trim board sub-assembly:
    1. Remove the screw.
    2.  
    3. Disengage the 7 clips.
    4.  
    5. Disconnect the rear door lock remote control cable and rear door inside locking cable and remove the rear door trim board.
    6.  

  10.  
  11. To install, reverse the removal procedure.

    Click image to see an enlarged view

    Fig. Exploded view of the rear door trim-Sedan models

  12.  

 
label.common.footer.alt.autozoneLogo