Yaris 2007

Engine Oil & Filter

Print

Oil & Filter Change




CAUTION
Prolonged and repeated contact with engine oil will result in the removal of natural oils from the skin, leading to dryness, irritation and dermatitis. Used engine oil contains potentially harmful contaminants which may cause skin cancer. Take precautions when replacing engine oil to minimize the risk of your skin making contact with used engine oil. Wear protective clothing and gloves that cannot be penetrated by oil. Wash skin with soap and water, or use waterless hand cleaner, to remove any used engine oil completely. Do not use gasoline, thinner, or solvents. Dispose of used oil and used oil filters at designated disposal sites in order to preserve the environment.

  1. Remove the oil pan drain plug and drain the engine oil.
  2.  
  3. Clean the oil pan drain plug and install it with a new gasket. Tighten to 28 ft. lbs. (38 Nm).
  4.  
  5. Using SST 09228-06501, remove the oil filter.

    Click image to see an enlarged view

    Fig. Removing the oil filter cap assembly with SST 09228-06501

  6.  
  7. Check and clean the oil filter installation surface.
  8.  
  9. Apply clean engine oil to the gasket of a new oil filter.
  10.  
  11. Gently screw the oil filter into place, then tighten it until the gasket comes into contact with the seat.
  12.  
  13. Using SST, tighten the oil filter. If enough space is available, use a torque wrench to tighten the oil filter. Tighten to 9.5 ft. lbs. (13 Nm). If the available workspace is insufficient to use a torque wrench, tighten the oil filter a 3/4 turn by hand or use a common wrench.
  14.  
  15. Fill with new engine oil. With oil filter change: 3.9 quarts.
  16.  
  17. Check for engine oil leaks.
  18.  
  19. Check engine oil level.

    Click image to see an enlarged view

    Fig. Locating the oil filter

  20.  

 
label.common.footer.alt.autozoneLogo