Yaris 2007

Coil Springs

Print

Removal & Installation



  1. Remove the rear shock absorber.
  2.  
  3. Lower the jacks slowly.
  4.  
  5. Remove the coil spring, coil spring insulator upper and coil spring insulator lower.

    Click image to see an enlarged view

    Fig. View of the rear coil spring and components

  6.  
  7. To install:
    1. Install the coil spring insulator lower onto the axle beam.
    2.  
    3. Install the coil spring insulator upper so that its gap fits onto the end of coil spring.
    4.  
    5. Install the coil spring onto the axle beam.
      NOTE
      The paint mark of the coil spring should be towards the underside and rear side of the vehicle.

    6.  

  8.  
  9. Install the shock absorber.
  10.  

 
label.common.footer.alt.autozoneLogo