Tie Rod Ends
- Place front wheels facing straight ahead.
Secure the steering wheel with the seat belt in order to prevent rotation.
NOTEThis operation is useful to prevent damage to the spiral cable.
- Remove the front wheels.
- Remove the cotter pin and the nut.
Install SST: 09628-62011. Separate the tie rod end from the steering knuckle.
Install the tie rod end onto the steering knuckle with a new castle nut. Tighten to 36 ft. lbs. (49 Nm).
NOTEIf the holes for the clip are not aligned, tighten the nut by a further turn of up to 60°.
- Install a new cotter pin.