- Disconnect the negative battery cable.
- Drain and recycle the engine coolant.
- Remove accessory drive belt.
- Remove the alternator.
- Remove engine mounting insulator sub-assembly RH.
Remove water pump pulley:
- Using SST 09960-10010, hold the water pump pulley.
- Remove the 3 bolts and remove the water pump pulley.
Remove the 3 bolts and 2 nuts and remove the water pump assembly and gasket.
- To install, reverse the removal procedure.
- Use a new gasket when installing the water pump. Refer to exploded illustration for torque values.
- Add coolant and check for leaks.