Zephyr 2006, Fusion & Milan 2006-2007, MKZ 2007

Stub Shaft, Pilot Bearing & Seal

Print

Removal & Installation




NOTE
This procedure covers replacement of the Stub Shaft, Bearing and Seal.

  1. Remove the halfshaft assembly.

    Click image to see an enlarged view

    Fig. Special tools needed for seal replacement

  2.  
  3. To remove the seal, use the special tool to remove the stub shaft seal. The stub shaft pilot bearing is not serviced.

    Click image to see an enlarged view

    Fig. To remove the seal, use the special tool to remove the stub shaft seal. The stub shaft pilot bearing is not serviced

  4.  

To install:


NOTE
Lubricate the new stub shaft pilot bearing housing seal with grease.

  1. Using the special tools, install the stub shaft pilot bearing housing seal.
    WARNING
    Inspect the inboard CV joint seal journal for rust or nicks/scratches prior to installing the halfshaft. If necessary, polish the seal journal with fine crocus cloth.



    Click image to see an enlarged view

    Fig. Using the special tools, install the stub shaft pilot bearing housing seal

  2.  
  3. Install the halfshaft assembly.
  4.  

 
AutoZone Logo