Removal & Installation
- Before servicing the vehicle, refer to the Precautions Section.
Remove or disconnect the following:
- Matchmark the clutch cover and flywheel. Loosen the clutch cover bolts one turn at a time until the spring tension is released.
- Remove the clutch cover.
Remove the clutch disc.
- Install the clutch disc on the flywheel.
- Align the matchmarks on the clutch cover and flywheel.
Evenly tighten the mounting bolts in several steps to 14 ft. lbs. (19 Nm) by following the order shown.
Install or connect the following: