tC 2007

Removal & Installation

Print


WARNING
When disassembling the heater control & accessory panel, touch the vehicle body to eliminate the static electricity to prevent the electrical parts from being damaged.

  1. If equipped with a manual transaxle, remove the shift lever knob.
  2.  
  3. Remove the console panel trim.
  4.  
  5. Remove heater control & accessory panel, as follows:
    1. Disengage the 9 claws.
      NOTE
      If the heater control and accessory panel is removed with the cover open, it may be broken. Be sure the cover is closed during removal.



      Click image to see an enlarged view

      Fig. Location of the 9 claws that secure the heater control panel assembly-tC

    2.  
    3. Detach the connector, then remove the heater control and accessory panel.
    4.  

  6.  
  7. Remove the center cluster module knob.
  8.  
  9. Remove the lower heater control base:
    1. Remove the 6 screws.
    2.  
    3. Release the 2 claws and remove the A/C panel.
    4.  
    5. Release the 4 claws and remove the lower heater control base.
    6.  

  10.  
  11. Remove the A/C amplifier as follows:
    1. Release the claw and remove the knob.
    2.  
    3. Release the 2 claws and remove the knob.
    4.  
    5. Release the 2 claws and remove the knob.
    6.  

  12.  
  13. Installation is the reverse of the removal procedure.
  14.  

 
label.common.footer.alt.autozoneLogo