tC 2007

Ignition Coil Module

Print

Removal & Installation



  1. Disconnect the negative battery cable.
  2.  
  3. Remove the engine cover
  4.  
  5. Detach the 4 ignition coil connectors.

    Click image to see an enlarged view

    Fig. Detach the ignition coil electrical connectors

  6.  
  7. Remove the 4 bolts (one bolt for each coil), and remove the 4 ignition coils.

    Click image to see an enlarged view

    Fig. Each ignition coil is secured with one mounting bolt

  8.  

To install:

  1. Install the ignition coils and secure with the bolts. Tighten to 80 inch lbs. (9 Nm).
  2.  
  3. Attach the 4 ignition coil connectors.
  4.  
  5. Install the engine cover.
  6.  
  7. Connect the negative battery cable.
  8.  

 
label.common.footer.alt.autozoneLogo