tC 2007

Brake Disc (Rotor)

Print

Removal & Installation



  1. Raise and safely support the vehicle.
  2.  
  3. Remove the rear wheel and tire assembly.
  4.  
  5. Unbolt and remove the caliper, but do NOT disconnect the fluid line. Suspend the caliper from the suspension with a piece of wire.
  6.  
  7. Remove the rotor.
    NOTE
    Matchmark the disc (rotor) and the axle hub before removing it. If the rotor cannot be removed easily, turn the shoe adjuster until the wheel turns freely.

  8.  
  9. Installation is the reverse of the removal procedure.

    Click image to see an enlarged view

    Fig. Exploded view of the rear disc brake components

  10.  

 
label.common.footer.alt.autozoneLogo