tC 2007

Brake Shoes

Print

Adjustment



Specific to:

Scion tC 2007-2008

Scion xB 2008

Scion xD 2008

  1. Rear drum brake shoe clearance.
    1. Provisionally install the hub nuts.
    2.  
    3. Remove the hole plug, and turn the adjuster to expand the shoe until the drum locks.
    4.  
    5. Using a screwdriver, release the adjuster 11 notches.
    6.  
    7. Install the hole plug.
    8.  

  2.  

Removal & Installation



Specific to:

Scion tC 2007-2008

Scion xB 2008

Scion xD 2008

  1. Before servicing the vehicle, refer to the Precautions Section.
  2.  
  3. Remove or disconnect the following:

    Wheels
     
    Brake drum
     
    Shoe return spring from the front and rear brake shoe.
     
    Front shoe hold down spring cup, shoe hold down spring and pin
     
    Front brake shoe and tension spring
     
    Parking brake shoe strut from the rear brake shoe
     
    Adjust lever tension spring and automatic adjust lever
     
    Rear shoe hold down spring cup, shoe hold down spring and pin
     
    Parking brake cable from parking brake shoe lever
     
    C-washer and rear brake shoe.
     

  4.  

To install:

Click image to see an enlarged view

Fig. Proper installation of the drum brake components

  1. Apply high temperature grease to the contact surfaces of the backing plate.
  2.  
  3. Install or connect the following:

    Parking brake lever with a new C-washer
     
    Rear brake shoe, pin, shoe hold down spring and shoe hold down spring cup
     
    Automatic adjust lever and automatic lever tension spring to front brake shoe
     
    Shoe return spring to the shoe strut
     
    Tension spring to the front and rear brake shoe
     
    Front brake shoe, pin, shoe hold down spring and shoe hold down spring cup
     
    Tension spring to the front and rear brake shoe
     
    Brake drum
     

  4.  
  5. Adjust the brake shoes

    Install the wheels.
     

  6.  

 
label.common.footer.alt.autozoneLogo