Log In
Search suggestions

    My Vehicles

    1965 Plymouth Fury 6.3L 4BL 8cyl

    My Store

    405 N COLLEGE ST
    (479) 443-4043

    OPEN 'til 10:00 PM today

    SAVE 20% ON ONLINE SHIP-TO-HOME ORDERS OF $100 OR MORE.

    Use Code: SEECLEAR

    See Details

    Crankshaft Position Sensor

    Inspect/Test/Service/Replace

    To remove the sensor:

    • Disconnect the wiring harness.
    • Unbolt the sensor mounting bolt.

    If the crankshaft timing sensor or the camshaft reference sensor is removed, follow this procedure when the sensor is replaced:

    • Thoroughly clean the sensor tip and install a new spacer on the sensor tip. New sensors should be supplied with the spacer installed.
    Spacer on crankshaft timing sensor and camshaft position sensor.
    • Install the sensor until the spacer lightly touches the sensor ring, and tighten the sensor mounting bolt 105 in.lb.

    AutoZone Logo