Log In
Search suggestions

    My Vehicles

    1985 Volvo 244GL 2.3L FI 4cyl

    My Store

    1720 S RIDGEWOOD A
    (386) 427-1210

    CLOSED Open at 7:30 AM

    GET A $25 GIFT CARD FOR EVERY $100 SPENT ON ONLINE SHIP-TO-HOME ORDERS.

    Use Code: GIFTME

    See Details

    GM Lumina/Silhouette/Transport APVs 1990-1999 Repair Guide

    Manual Window Regulator

    Print

    REMOVAL AND INSTALLATION



    1. Remove the door trim panel, as outlined earlier in this section.
    2.  
    3. Roll the window up, and apply fabric backed body tape from the window over the top of the door to the other side of the window. This will hold the window in position when the regulator is removed.
    4.  
    5. Using a 3 / 16 drill bit, drill the rivet heads from the regulator to door rivets.
    6.  
    7. Push the regulator into the door and slide it forward then rearward to remove the regulator arms from the sash and the regulator rail.
    8.  
    9. Fold the regulator arms together and remove the regulator from the door access hole.
    10.  

    To install:
    1. Place the regulator into the door through the access hole.
    2.  
    3. Place the regulator arm rollers into the sash and the regulator rail.
    4.  
    5. Push the regulator through the regulator door opening and align the holes in the regulator with the holes in the door.
    6.  
    7. If the proper size rivets are unavailable, or a rivet gun isn't handy, then use 1 / 4 in. bolts, about a 1 / 2 in. long, with a spring washer and nut to reattach the regulator to the door.
    8.  
    9. Install the trim panel, as outlined earlier in this section.
    10.  

     
    AutoZone Logo