Log In
Search suggestions

    My Vehicles

    1971 Peugeot 304 1.3L 1BL 4cyl

    My Store

    1980 HARLEM AVE
    (708) 442-6770

    CLOSED Open at 7:30 AM

    GET A $25 GIFT CARD FOR EVERY $100 SPENT ON ONLINE SHIP-TO-HOME ORDERS.

    Use Code: GIFTME

    See Details

    Escalade, Suburban, Tahoe, Yukon, Denali, DenaliXL, YukonXL 1999-2005

    Removal & Installation

    Print

    1. Remove the floor air outlet duct extension from the floor duct.

      Click image to see an enlarged view

      Fig. Remove the floor air outlet duct extension (1) from the floor duct (2)

    2.  
    3. Disconnect the electrical connection at the blend door actuator.

      Click image to see an enlarged view

      Fig. Blend door actuator and related components

    4.  
    5. Remove the blend door actuator mounting screws from the HVAC module.
    6.  
    7. Remove the blend door actuator as an assembly with the actuator cam.

      Click image to see an enlarged view

      Fig. Remove the blend door actuator mounting screws from the HVAC module

    8.  

    To install:

    1. Install the blend door actuator as an assembly with the actuator cam.
      1. Line up the heater/defroster valve lever with the blend door actuator cam slot.
      2.  
      3. Line up the A/C valve lever with the blend door actuator cam
      4.  

    2.  
    3. Install the blend door actuator mounting screw to the HVAC module.
      1. Tighten the blend door actuator mounting screw to 14 inch lbs. (1.6 Nm).
      2.  

    4.  
    5. Connect the electrical connection at the blend door actuator.

      Click image to see an enlarged view

      Fig. Blend door actuator and related components

    6.  
    7. Install the floor air outlet duct extension to the floor air duct.
    8.  

     
    AutoZone Logo