Log In
Search suggestions

    My Vehicles

    1994 Nissan/Datsun Altima 2.4L SFI DOHC 4cyl

    My Store

    1720 S RIDGEWOOD A
    (386) 427-1210

    OPEN 'til 9:00 PM today

    GET A $25 GIFT CARD FOR EVERY $100 SPENT ON ONLINE SHIP-TO-HOME ORDERS.

    Use Code: GIFTME

    See Details

    GM Celebrity/Century/Ciera/6000 1982-1996 Repair Guide

    Mass Air Flow (MAF) Sensor

    Print

    REMOVAL & INSTALLATION



    See Figure 1

    1. Disconnect the negative battery cable.
    2.  
    3. Detach the electrical connector, then remove the MAF sensor.
    4.  
    5. On some vehicles you will need to loosen the clamps on the air inlet ducts, then remove the air inlet ducts and remove the MAF sensor.
    6.  



    Click image to see an enlarged view

    Fig. Fig. 1: On some vehicles you will need to loosen the clamps on the air inlet ducts, then remove the air inlet ducts and the MAF sensor - 3.8L engine shown

    To install:

    Take note that this is an expensive and fragile sensor. If it was defective try and find the cause so the new one will not be damaged by the same problem, especially the air filter, broken screen, defective charging system, etc.

    1. If removed install the air duct setup, then install the MAF sensor.
    2.  
    3. Mount with the attaching screws, then install the electrical connection to the sensor.
    4.  
    5. Reconnect the negative battery cable.
    6.  

     
    AutoZone Logo