Curt Trailer Hitch 114433 - Read 1 Reviews on Curt #114433

Curt Trailer Hitch

Vehicle Specific

Part Number: 114433
Alternate Part Number: DISC11443
Features & Benefits

CURT's custom trailer hitches are made specifically for your year, make and model vehicle, with many applications using pre-drilled holes in your car or truck frame.

  • Gross trailer weights (GTW) & tongue weights (TW) vary by application.
  • Never exceed vehicle weight rating.
  • Old-style ballmount, pin & clip included. hitch ball sold separately.
  • Limited lifetime warranty to original purchaser.
  • Made in USA
  • Durable powder coat finish
Product Details
Part Number: 114433
Weight: 35.00lbs
Notes: Enter your vehicle information above to see product notes.
Color / Finish: Black Powder Coat
Cross Tube Design: Square
Drilling Required: Yes
Estimated Installation Time (min): 60.0
Hitch Class: I
Hitch Receiver Size Compatibility: 1 1/4"
Installation Hardware Included: Yes
Installation Instructions Included: Yes
Load Weight Capacity (lbs): 2000.0
Material: Steel
Package Contents: Installation Hardware, Installation Instructions, Hitch, Ball Mount, Pin, and Clip
Required Installation Equipment: Ratchet, Socket Set, and Torque Wrench Required. Rotary Tool and Bits, Aviator Shears, or Masking Tape if trimming is required. Power Drill and Drill Bits if Drilling is Required. Safety Glasses and Other Protective Wear Recommended.
Vehicle Category: Car
Shipping Information: Overnight and Two Day shipping are not available for PO Box, APO/FPO/DPO or US Territory addresses.
This product may be shipped directly by the vendor to any eligible US addresses, excluding APO/FPO/DPO or US Territory addresses.
  • Overall
     

    Please wait while we process your request
     

    Please wait while we retrieve the user's information

    Bio

    Your bio is currently empty. Now is a great time to fill in your profile.

    Rank

    This profile is private.

    This profile is only shared with friends.

    This profile is under review.

    We were unable to request friendship with this user.

    We were unable to request friendship with this user. Are you logged in?

    Your friendship request has been sent to this user.

    We were unable to terminate friendship with this user.

    We were unable to terminate friendship with this user. Are you logged in?

    You are no longer friends with this user.

    We were unable to ignore this user.

    We were unable to ignore this user. Are you logged in?

    This user is now ignored.

    We were unable to stop ignoring this user.

    We were unable to stop ignoring this user. Are you logged in?

    This user is no longer ignored.

    We encountered a problem recommending this user.

    pluck_user_recommend_permission

    You have recommended this user.

    Please limit your comment length to less than 2000 characters.

    Send Cancel

    Curt/Trailer Hitch

    Filter

    Sort by:

    1 review


    Please wait while we perform your request.

    Please wait while we perform your request.
    1

    This review is hidden because you have chosen to ignore Member 271929136. Show DetailsHide Details

    Extremely difficult hitch to install on Suzuki SX4 hatchback/sportback, Buy the Draw tite instead

    It is important to note that if you have a Suzuki sx4 crossover you will need to buy a hitch that angles down from where it attaches to the frame.This hitch is extremely difficult to install properly. I am an experienced mechanic and it took me at least 8 hours spread out over 2 days to fit into place. It can be done but will need to be forced into place and require a bit of luck. Curt has an installation video on their website but they do not show the hitch being fitted into place. It just magically appears installed. There is no reason not show this, especially since it is an installation video, other then the fact that it does not easily fit into place. You will have to apply a good amount of force to get it into place once you have enough clearance between the exhaust hangers. Chances are that you will knock the bolts into the frame and lose them if you do not take precautions. This could easily be avoided by providing 2 fish tools but Curt only provides 1. I was able to get it into place with the nuts on the bolts to prevent the bolts from being pushed into frame and losing them. Luckily there is just enough room to get the nuts back off but it is a tight fit. The problem with this hitch is that the tube angles down directly from where it attaches to the frame on both sides. In order to install it correctly one side will rub very hard against the underside of the bumper and tow hook/loop in the center that must remain behind the angle with hole in it. Once it is forced into place the tubes will fit in the cut out in the center underneath the bumper and allow for a little bit of movement. The Draw tite hitch provides 2 fish tools, costs less, and does not angle down directly from where it attaches to the frame which should allow for ample room to install it with out having to force it into place.

    Pros: heavy duty hitch and hardware

    Cons: very difficult to fit into place correctly,only 1 fish tool provided

    share review Share pluck_abuse_reportAlt Report

    Edited on 10/22/2013 by Editor

    Comment


    Please wait while we perform your request.
    Select reviews which match your interests.

    Please wait while we file your abuse report.

    Report Abuse

    We're sorry. We were unable to report abuse at this time.

    We limit the number of reactions an individual user can submit over a given period for quality reasons. You have currently reached that limit. Please try resubmitting your abuse report again later.

    Comment is too long. Enter 500 characters or less.

    Send Cancel

    Please wait while we send the email.

    Email This

    You may send this to 5 e-mail addresses. Please separate each address with a space.

    We're sorry, but the item you are sending has been removed from the site.

    We're sorry. We were unable to send the email at this time.

    Please specify a recipient.

    You can only send messages to 5 addresses at a time.

    The address "" is not valid.

    Please specify a subject.

    Send Cancel
     
    Browse to find other vehicles this part fits:

    RECOMMENDED FOR YOU

    OTHER CUSTOMERS ALSO VIEWED

    BUY WITH CONFIDENCE

    ABOUT CORE PARTS

    Buy online and return core parts to the store to be refunded the price.
    Core Parts Policy

    FREE SHIPPING

    On Orders $75 or Greater
    and free shipping to APO, FPO, DPO addresses.
    Get More Details

    RETURN ANYWHERE

    Buy Online, Return
    Anywhere
    Get More Details

    SAME-DAY STORE PICKUP

    Save time by buying online and picking up items in store.
    Learn More

    Payment Methods:
     
    label.common.footer.alt.autozoneLogo