2008 Jeep Wrangler Starter

When using a 2008 Jeep Wrangler, a starter motor is required to fire up the engine and drive, and starter motors rely on power from a battery. If the starter motor fails, the Jeep won't start. A starter typically lasts between 100,000 and 150,000 miles on average, but if your Jeep starter fails, you can get a replacement from AutoZone with ease.

There are signs to watch for that let you know your Jeep Wrangler 2008 starter is going bad. The most common sign is a vehicle that won't turn over and start. Failing starters can also start the vehicle intermittently. You may notice grinding or whirring noises when cranking the key in your Jeep's ignition and may even see smoke during startup. If you notice these issues, it might be time to search for 2008 Jeep Wrangler motor starter, sorting by the year, make, model and engine size of your vehicle.

What are you working on today?

Get an exact fit for your 2008 Jeep Wrangler

1-3 of 3 Results

1-3 of 3 Results
      • Sponsored
        Sponsored
        Duralast Gold Starter DLG6763S for 2008 Jeep Wrangler
        • Part # DLG6763S
        • SKU # 428007

        Notes: Designed for maximum durability 100% new

        • PRICE: 199.99
        • Tooth Quantity: 10
        • Starter Rotation: Clockwise
        • Voltage: 12.0
        • Family: PMGR (Permanent Magnet Gear Reduction)
        • Mounting Shims Included: No
        • Mounting Bolt Hole Quantity: Bolt-On

      • Sponsored
        Sponsored
        Duralast Starter 6763S for 2008 Jeep Wrangler
        • Part # 6763S
        • SKU # 972927

        Notes: Premium reman

        • PRICE: 139.99
        • Tooth Quantity: 10
        • Starter Rotation: Clockwise
        • Family: PMGR (Permanent Magnet Gear Reduction)
        • Mounting Shims Included: No
        • Mounting Bolt Hole Quantity: Bolt-On

      • Sponsored
        Sponsored
        Bosch Starter SR6471X for 2008 Jeep Wrangler
        • Part # SR6471X
        • SKU # 1081195

        Notes: Starter (remanufactured).

        • PRICE: 219.99
        • Power Rating: 1.2KW
        • Nose Cone Material: Aluminum
        • Tooth Quantity: 10
        • Starter Rotation: Clockwise
        • Voltage: 12.0VDC
        • Mounting Hardware Included: No
        • Solenoid Attached: Yes
        • Mounting Shims Included: No
        • Nose Cone Type: Closed Nose
        • Mounting Bolt Hole Quantity: 2

      About


      2008 Jeep Wrangler Starter

      How to Install Your 2008 Jeep Wrangler Starter

      Once you locate the proper Jeep Wrangler starter, it's time to replace the part. Begin by lifting up the hood of your vehicle and disconnecting the negative battery cable. Now, safely raise your vehicle off the ground so you can climb underneath. Climb under the driver's side of your vehicle and access the starter motor near the transmission. Disconnect the wire running to the starter and then unbolt the starter to remove it. Bolt the replacement starter into position and attach the wire as well. Lower the vehicle, reconnect the battery, and your vehicle should now start.

      AutoZone makes it simple to get repair or replacement components for a Jeep Wrangler. Select orders come with Same-Day In-Store Pickup as well as Free Next-Day Delivery to your house.

      Customer

      Reviews

      Reviews for


      Excellent starter!

      Ashley

      in 7 months

      The starter looked brand new after opening the box. Once installed I could tell right away it even sounded better! Great remanufactured starter. I do recommend.

      What kind of vehicle do you drive? 2008 Jeep Wrangler JKU

      The starter looked brand new after opening the box. Once installed I could tell right away it even sounded better! Great remanufactured starter. I do recommend.

      What kind of vehicle do you drive? 2008 Jeep Wrangler JKU