2010 Mazda 3 Starter

It takes plenty of electrical energy to start your car's engine, and it's the 2010 Mazda 3 starter that converts that electricity to mechanical force to crank the motor over. Many issues getting your engine running are related to the charging or starting system, and the repair can save you the heartache of a breakdown. Get your car working well again with new 2010 Mazda 3 starting system parts from AutoZone.

Engine starters are an electric motor that uses battery power to initially turn the engine over. A strong current is delivered to the starter from the battery, forcing the armature shaft to extend the spinning pinion year into the ring gear. Using gear reduction. The high-torque starter for 2010 Mazda 3 models cranks the engine over to begin the cycles in the combustion process.

What are you working on today?

Get an exact fit for your 2010 Mazda 3

1-5 of 5 Results

1-5 of 5 Results
      • Sponsored
        Sponsored
        Duralast Starter 17597 for 2010 Mazda 3
        • Part # 17597
        • SKU # 650788
        Notes: Premium reman
        • PRICE: 149.99
        • Power Rating: 1.2KW
        • Design: Permanent Magnet Gear Reduction
        • Nose Cone Material: Aluminum
        • Tooth Quantity: 11
        • Voltage: 12.0VDC
        • Starter Rotation: Clockwise (Right)
        • Mounting Hardware Included: No
        • Solenoid Attached: Yes
        • Mounting Shims Included: No
        • Nose Cone Type: Closed Nose
        • Mounting Type: Flange
        • Mounting Bolt Hole Quantity: 2
      • Sponsored
        Sponsored
        Duralast Starter 17598 for 2010 Mazda 3
        • Part # 17598
        • SKU # 650796
        Notes: Import premium remanufactured.
        • PRICE: 164.99
        • Power Rating: 1.4KW
        • Design: Permanent Magnet Gear Reduction
        • Nose Cone Material: Aluminum
        • Tooth Quantity: 11
        • Voltage: 12.0VDC
        • Starter Rotation: Clockwise (Right)
        • Mounting Hardware Included: No
        • Solenoid Attached: Yes
        • Mounting Shims Included: No
        • Mounting Type: Flange
        • Mounting Bolt Hole Quantity: 2
      • Sponsored
        Sponsored
        TotalPro Starter 17598VC for 2010 Mazda 3
        • Part # 17598VC
        • SKU # 218287
        Notes: Remanufactured unit
        • PRICE: 119.99
        • Power Rating: 1.4KW
        • Nose Cone Material: Aluminum
        • Tooth Quantity: 11
        • Starter Rotation: Clockwise (Right)
        • Voltage: 12.0VDC
        • Mounting Hardware Included: No
        • Solenoid Attached: Yes
        • Mounting Shims Included: No
        • Nose Cone Type: Closed Nose
        • Mounting Type: Pad
        • Mounting Bolt Hole Quantity: 2
      • Sponsored
        Sponsored
        Duralast Gold Starter DLG17597 for 2010 Mazda 3
        • Part # DLG17597
        • SKU # 428103
        Notes: Designed for maximum durability 100% new
        • PRICE: 184.99
        • Tooth Quantity: 11
        • Voltage: 12.0
        • Starter Rotation: Clockwise
        • Family: PMGR (Permanent Magnet Gear Reduction)
        • Mounting Shims Included: No
        • Mounting Bolt Hole Quantity: Bolt-On
      • Sponsored
        Sponsored
        Duralast Gold Starter DLG17598 for 2010 Mazda 3
        • Part # DLG17598
        • SKU # 428161
        Notes: Designed for maximum durability 100% new
        • PRICE: 199.99
        • Tooth Quantity: 11
        • Voltage: 12.0
        • Starter Rotation: Clockwise
        • Family: PMGR (Permanent Magnet Gear Reduction)
        • Mounting Shims Included: No
        • Mounting Bolt Hole Quantity: Bolt-On

      About


      2010 Mazda 3 Starter

      Signs of a Bad Starter

      Starters are often known to last a car's entire lifetime but since they're an electrical part, there's always the potential for a failure. If your starter is failing, signs will appear to indicate a problem like clicking or grinding when you turn the ignition key, slow cranking, or times the starter cuts out mid-crank. A bad starter may also not crank at all.

      2010 Mazda 3 Starter Replacement

      Changing the starter can be done by a DIYer with common tools like wrenches and a socket and ratchet set, and power tools make the job even quicker. The parts are readily available and can range in price from about $125 to $225 depending on the brand, grade, and the warranty that's included.

      When you're shopping for car parts like 2010 Mazda 3 batteries, starting and charging system components, fluids, filters, or tools to do the job, check at AutoZone. Filter by year, make, model, and engine size to view parts that fit your car like the OEM from brands like Bosch and Duralast, and get them in hand with options like Same-Day In-Store Pickup and Free Next-Day Delivery on eligible orders.