ALIGNMENT SHIM

1-24 of 34 Results

This is a test

SET YOUR VEHICLE
Get an exact fit for your vehicle.
Duralast Alignment Shim VV13787G
  • Part # VV13787G
  • Warranty: 
Notes: Rear, Check Caliper To Rotor Clearance After Installation. Toe Degree Of Change .80 Degrees or .40" or 3/8".
Duralast Alignment Shim VV100143
  • Part # VV100143
  • Warranty: 
Notes: Rear, Check Caliper To Rotor Clearance After Installation. Full Contact Dual Angle Shim. Internal Cut To Fit Tabs. Plus or Minus 1-1/2 Degree Camber/Toe. Yellow Shim.
Duralast Alignment Shim VV13725
  • Part # VV13725
  • Warranty: 
Notes: Rear, Cut To Fit. Full Contact Dual Angle Shim. Grey Shim. Plus or Minus 1-1/4 Degree Camber/Toe.
Duralast Alignment Shim VV13787D
  • Part # VV13787D
  • Warranty: 
Notes: Rear, Check Caliper To Rotor Clearance After Installation. Toe Degree Of Change .30 Degrees or .15" or 5/32".
Duralast Alignment Shim VV13752
  • Part # VV13752
  • Warranty: 
Notes: Rear, Blue Shim. Cut To Fit. Full Contact Dual Angle Shim. Plus or Minus 1/2 Degree Camber/Toe.
Duralast Alignment Shim VV13785D
  • Part # VV13785D
  • Warranty: 
Application: GLS model
Notes: Rear, 7th and 8th Digit Of Vin Is 1J. May Require Spacers. Minus 1/2 Degree Camber. Requires Special Wrench.
Duralast Alignment Shim VV13784D
  • Part # VV13784D
  • Warranty: 
Notes: Rear, May Require Spacers. Plus or Minus 3/8 Degree Toe. Requires Special Wrench.
Duralast Alignment Shim VV13788B
  • Part # VV13788B
  • Warranty: 
Notes: Rear, 1/4 Degree Camber. Check Caliper To Rotor Clearance After Installation.
Duralast Alignment Shim VV13712
  • Part # VV13712
  • Warranty: 
Notes: Rear, Cut To Fit. Plus or Minus 1/2 Degree Camber/Toe. White Shim.
Duralast Alignment Shim VV13756
  • Part # VV13756
  • Warranty: 
Application: Miser model
Notes: Rear, Blue Shim. Cut To Fit. Full Contact Dual Angle Shim. Plus or Minus 1-1/2 Degree. Plus or Minus 1-1/2 Degree Camber/Toe.
Duralast Alignment Shim VV13751
  • Part # VV13751
  • Warranty: 
Notes: Rear, Blue Shim. Cut To Fit. Full Contact Dual Angle Shim. Plus or Minus 1/4 Degree Camber/Toe.