2011 Honda CRV Brake Caliper

Buy Online. Pick Up In-Store.

What are you working on today?

Get an exact fit for your 2011 Honda CRV
Do the complete brake job Save 15% on a set of any Duralast® brake pads and any two Duralast Brake Rotors.

1-12 of 12 Results

1-12 of 12 Results
      • Sponsored
        Sponsored
        Duralast Rear Passenger Side Brake Caliper 19-B2910A for 2011 Honda CRV
        • Part # 19-B2910A
        • SKU # 563115
        • Location: Rear

        Notes: Rear right, Disc Brake Caliper. Built in USA. Supplied with mounting bracket. Remanufactured caliper with installation hardware.

        • PRICE: 78.99
        • Location:: Rear
        • Pads Included: No
        • Casting Number: 10CL, WF
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.25 x 25mm
        • Piston Diameter: 38mm
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: Yes
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Rear Driver Side Brake Caliper 19-B6886 for 2011 Honda CRV
        • Part # 19-B6886
        • SKU # 566225
        • Location: Rear

        Notes: Rear left, Disc Brake Caliper. Built in Japan. Supplied with mounting bracket. Remanufactured caliper with installation hardware.

        • PRICE: 95.99
        • Location:: Rear
        • Pads Included: No
        • Caliper Color: Silver
        • Caliper Type: Floating
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Mounting Bracket Included: Yes
        • Mounting Hole Diameter: 12.0mm
        • Abutment Clips Included: Yes
        • Anti-Rattle Spring Included: No
        • Inlet Thread Diameter: 10.0mm
        • Piston Material: Steel
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Rear Driver Side Brake Caliper 19-B2911A for 2011 Honda CRV
        • Part # 19-B2911A
        • SKU # 563118
        • Location: Rear

        Notes: Rear left, Disc Brake Caliper. Built in USA. Supplied with mounting bracket. Remanufactured caliper with installation hardware.

        • PRICE: 78.99
        • Location:: Rear
        • Pads Included: No
        • Casting Number: 10CL, WF
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.25 x 25mm
        • Piston Diameter: 38mm
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: Yes
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Front Passenger Side Brake Caliper 19-B2959 for 2011 Honda CRV
        • Part # 19-B2959
        • SKU # 563198
        • Location: Front

        Notes: Front right, Remanufactured part. Disc Brake Caliper. Supplied with mounting bracket. Remanufactured caliper with installation hardware.

        • PRICE: 94.99
        • Location:: Front
        • Pads Included: No
        • Caliper Color: Silver
        • Caliper Type: Floating
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Mounting Bracket Included: Yes
        • Mounting Hole Diameter: 14.0mm
        • Abutment Clips Included: Yes
        • Anti-Rattle Spring Included: No
        • Inlet Thread Diameter: 10.0mm
        • Piston Material: Steel
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 2

      • Sponsored
        Sponsored
        Duralast Front Driver Side Brake Caliper 19-B2958 for 2011 Honda CRV
        • Part # 19-B2958
        • SKU # 563197
        • Location: Front

        Notes: Front left, Remanufactured part. Disc Brake Caliper. Supplied with mounting bracket. Remanufactured caliper with installation hardware.

        • PRICE: 94.99
        • Location:: Front
        • Pads Included: No
        • Casting Number: 13CLT, B
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.25 x 25mm
        • Mounting Hardware Included: Yes
        • Piston Diameter: 46mm
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: Yes
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 2

      • Sponsored
        Sponsored
        Duralast Rear Passenger Side Brake Caliper 19-B6887 for 2011 Honda CRV
        • Part # 19-B6887
        • SKU # 566226
        • Location: Rear

        Notes: Rear right, Disc Brake Caliper. Built in Japan. Supplied with mounting bracket. Remanufactured caliper with installation hardware.

        • PRICE: 95.99
        • Location:: Rear
        • Pads Included: No
        • Caliper Color: Silver
        • Caliper Type: Floating
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Mounting Bracket Included: Yes
        • Mounting Hole Diameter: 12.0mm
        • Abutment Clips Included: Yes
        • Anti-Rattle Spring Included: No
        • Inlet Thread Diameter: 10.0mm
        • Piston Material: Steel
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Front Driver Side Brake Caliper C9839 for 2011 Honda CRV
        • Part # C9839
        • SKU # 897508
        • Location: Front

        Notes: Driver side, Remanufactured part Supplied without mounting bracket

        • PRICE: 84.99
        • Location:: Front
        • Pads Included: No
        • Casting Number: 13CLT, B
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.25 x 25mm
        • Mounting Hardware Included: Yes
        • Piston Diameter: 46mm
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: No
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 2

      • Sponsored
        Sponsored
        Duralast Front Passenger Side Brake Caliper C9838 for 2011 Honda CRV
        • Part # C9838
        • SKU # 897507
        • Location: Front

        Notes: Passenger side, Remanufactured part Supplied without mounting bracket

        • PRICE: 84.99
        • Location:: Front
        • Casting Number: 13CLT, A
        • Pads Included: No
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.25 x 25mm
        • Mounting Hardware Included: Yes
        • Piston Diameter: 46mm
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: No
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 2

      • Sponsored
        Sponsored
        Duralast Rear Passenger Side Brake Caliper C9768 for 2011 Honda CRV
        • Part # C9768
        • SKU # 692646
        • Location: Rear

        Notes: Passenger side, Remanufactured part. US model (VIN begins with 1, 4 or 5). Supplied without mounting bracket

        • PRICE: 68.99
        • Location:: Rear
        • Pads Included: No
        • Casting Number: 108, M, 10CL15SN
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.0mm
        • Piston Diameter: 38mm
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: No
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Rear Driver Side Brake Caliper D6886 for 2011 Honda CRV
        • Part # D6886
        • SKU # 247374
        • Location: Rear

        Notes: Driver side, Remanufactured part. Japan model (VIN begins with J). Supplied without mounting bracket

        • PRICE: 85.99
        • Location:: Rear
        • Pads Included: No
        • Casting Number: 108, M, 10CL15SN
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.25 x 25mm
        • Mounting Hardware Included: Yes
        • Piston Diameter: 38mm
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Friction Materials Standards Institute Pad Number: OEM Standard
        • Mounting Bracket Included: No
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Rear Driver Side Brake Caliper C9769 for 2011 Honda CRV
        • Part # C9769
        • SKU # 692647
        • Location: Rear

        Notes: Driver side, Remanufactured part. US model (VIN begins with 1, 4 or 5). Supplied without mounting bracket

        • PRICE: 68.99
        • Location:: Rear
        • Pads Included: No
        • Casting Number: 108, M, 10CL15SN
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.0mm
        • Piston Diameter: 38mm
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: No
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Rear Passenger Side Brake Caliper D6887 for 2011 Honda CRV
        • Part # D6887
        • SKU # 246416
        • Location: Rear

        Notes: Passenger side, Remanufactured part. Japan model (VIN begins with J). Supplied without mounting bracket

        • PRICE: 85.99
        • Location:: Rear
        • Pads Included: No
        • Casting Number: 108, M, 10CL15SN
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.25 x 25mm
        • Mounting Hardware Included: Yes
        • Piston Diameter: 38mm
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Friction Materials Standards Institute Pad Number: OEM Standard
        • Mounting Bracket Included: No
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1