2001 Nissan/Datsun Maxima Brake Caliper

Buy Online. Pick Up In-Store.

What are you working on today?

Get an exact fit for your 2001 Nissan/Datsun Maxima
Do the complete brake job Save 15% on a set of any Duralast® brake pads and any two Duralast Brake Rotors.

1-12 of 12 Results

1-12 of 12 Results
      • Sponsored
        Sponsored
        Duralast Front Driver Side Brake Caliper 19-B2604 for 2001 Nissan/Datsun Maxima
        • Part # 19-B2604
        • SKU # 562695
        • Location: Front

        Notes: Driver side, Remanufactured part Supplied with mounting bracket

        • PRICE: 59.99
        • Location:: Front
        • Pads Included: No
        • Casting Number: 99W, T2, C, L
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.0mm
        • Mounting Hardware Included: Yes
        • Piston Diameter: 57mm
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: Yes
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Rear Driver Side Brake Caliper 19-B2001 for 2001 Nissan/Datsun Maxima
        • Part # 19-B2001
        • SKU # 717172
        • Location: Rear

        Notes: Driver side, Remanufactured part Supplied with mounting bracket. Built to 10/2000

        • PRICE: 72.99
        • Location:: Rear
        • Pads Included: No
        • Casting Number: 51
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: 3/8-24in
        • Piston Diameter: 34mm
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: Yes
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Front Passenger Side Brake Caliper 19-B2605 for 2001 Nissan/Datsun Maxima
        • Part # 19-B2605
        • SKU # 562698
        • Location: Front

        Notes: Passenger side, Remanufactured part Supplied with mounting bracket

        • PRICE: 59.99
        • Location:: Front
        • Pads Included: No
        • Casting Number: 99W, T2, C, R
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.0mm
        • Mounting Hardware Included: Yes
        • Piston Diameter: 57mm
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: Yes
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Rear Driver Side Brake Caliper 19-B2857 for 2001 Nissan/Datsun Maxima
        • Part # 19-B2857
        • SKU # 563047
        • Location: Rear

        Notes: Driver side, Remanufactured part Supplied with mounting bracket. Built from 11/2000

        • PRICE: 103.99
        • Location:: Rear
        • Pads Included: No
        • Casting Number: L
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.0mm
        • Piston Diameter: 34mm
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: Yes
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Rear Passenger Side Brake Caliper 19-B2000 for 2001 Nissan/Datsun Maxima
        • Part # 19-B2000
        • SKU # 717239
        • Location: Rear

        Notes: Passenger side, Remanufactured part Supplied with mounting bracket. Built to 10/2000

        • PRICE: 72.99
        • Location:: Rear
        • Pads Included: No
        • Casting Number: 51
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: 3/8-24in
        • Piston Diameter: 34mm
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: Yes
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Rear Passenger Side Brake Caliper 19-B2856 for 2001 Nissan/Datsun Maxima
        • Part # 19-B2856
        • SKU # 563046
        • Location: Rear

        Notes: Passenger side, Remanufactured part Supplied with mounting bracket. Built from 11/2000

        • PRICE: 103.99
        • Location:: Rear
        • Pads Included: No
        • Caliper Color: Silver
        • Caliper Type: Floating
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Mounting Bracket Included: Yes
        • Mounting Hole Diameter: 10.0mm
        • Abutment Clips Included: Yes
        • Anti-Rattle Spring Included: No
        • Inlet Thread Diameter: 10.0mm
        • Piston Material: Steel
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Rear Driver Side Brake Caliper C9189 for 2001 Nissan/Datsun Maxima
        • Part # C9189
        • SKU # 152037
        • Location: Rear

        Notes: Driver side, Remanufactured part Supplied without mounting bracket. Built to 10/2000

        • PRICE: 62.99
        • Location:: Rear
        • Casting Number: 51
        • Pads Included: No
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: 3/8-24in
        • Piston Diameter: 34mm
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: No
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Front Passenger Side Brake Caliper C9614 for 2001 Nissan/Datsun Maxima
        • Part # C9614
        • SKU # 692552
        • Location: Front

        Notes: Passenger side, Remanufactured part Supplied without mounting bracket

        • PRICE: 49.99
        • Location:: Front
        • Casting Number: 99W, T2, C, R
        • Pads Included: No
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.0 x 33mm
        • Mounting Hardware Included: Yes
        • Piston Diameter: 57mm
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: No
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Rear Passenger Side Brake Caliper C9616 for 2001 Nissan/Datsun Maxima
        • Part # C9616
        • SKU # 692554
        • Location: Rear

        Notes: Passenger side, Remanufactured part Supplied without mounting bracket. Built from 11/2000

        • PRICE: 93.99
        • Location:: Rear
        • Casting Number: R
        • Pads Included: No
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.0 x 33mm
        • Piston Diameter: 34mm
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: No
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Rear Driver Side Brake Caliper C9617 for 2001 Nissan/Datsun Maxima
        • Part # C9617
        • SKU # 692555
        • Location: Rear

        Notes: Driver side, Remanufactured part Supplied without mounting bracket. Built from 11/2000

        • PRICE: 93.99
        • Location:: Rear
        • Pads Included: No
        • Casting Number: L
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.0 x 33mm
        • Piston Diameter: 34mm
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: No
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Rear Passenger Side Brake Caliper C9188 for 2001 Nissan/Datsun Maxima
        • Part # C9188
        • SKU # 152036
        • Location: Rear

        Notes: Passenger side, Remanufactured part Supplied without mounting bracket. Built to 10/2000

        • PRICE: 62.99
        • Location:: Rear
        • Casting Number: 51
        • Pads Included: No
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: 3/8-24in
        • Piston Diameter: 34mm
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Friction Materials Standards Institute Pad Number: OEM Standard
        • Mounting Bracket Included: No
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Front Driver Side Brake Caliper C9615 for 2001 Nissan/Datsun Maxima
        • Part # C9615
        • SKU # 692553
        • Location: Front

        Notes: Driver side, Remanufactured part Supplied without mounting bracket

        • PRICE: 49.99
        • Location:: Front
        • Pads Included: No
        • Casting Number: 99W, T2, C, L
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.0 x 33mm
        • Mounting Hardware Included: Yes
        • Piston Diameter: 57mm
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: No
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1