2019 Nissan/Datsun Murano Brake Caliper

Buy Online. Pick Up In-Store.

What are you working on today?

Get an exact fit for your 2019 Nissan/Datsun Murano
Do the complete brake job Save 15% on a set of any Duralast® brake pads and any two Duralast Brake Rotors.

1-8 of 8 Results

1-8 of 8 Results
      • Sponsored
        Sponsored
        Duralast Front Driver Side Brake Caliper 19-B7100 for 2019 Nissan/Datsun Murano
        • Part # 19-B7100
        • SKU # 246164
        • Location: Front

        Notes: Front left, Remanufactured part. Disc Brake Caliper. Supplied with mounting bracket. Remanufactured caliper with installation hardware.

        • PRICE: 108.99
        • Location:: Front
        • Pads Included: No
        • Caliper Color: Silver
        • Caliper Type: Floating
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Mounting Bracket Included: Yes
        • Mounting Hole Diameter: 14.0mm
        • Abutment Clips Included: Yes
        • Anti-Rattle Spring Included: No
        • Inlet Thread Diameter: 10.0mm
        • Piston Material: Steel
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 2

      • Sponsored
        Sponsored
        Duralast Rear Passenger Side Brake Caliper 19-B6037 for 2019 Nissan/Datsun Murano
        • Part # 19-B6037
        • SKU # 563868
        • Location: Rear

        Notes: Rear right, Disc Brake Caliper. Supplied with mounting bracket. Remanufactured caliper with installation hardware.

        • PRICE: 79.99
        • Location:: Rear
        • Casting Number: 4320, or, 4319
        • Pads Included: No
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: 3/8-24in
        • Piston Diameter: 43mm
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: Yes
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Front Passenger Side Brake Caliper 19-B7101 for 2019 Nissan/Datsun Murano
        • Part # 19-B7101
        • SKU # 246188
        • Location: Front

        Notes: Front right, Remanufactured part. Disc Brake Caliper. Supplied with mounting bracket. Remanufactured caliper with installation hardware.

        • PRICE: 108.99
        • Location:: Front
        • Pads Included: No
        • Caliper Color: Silver
        • Caliper Type: Floating
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Mounting Bracket Included: Yes
        • Mounting Hole Diameter: 14.0mm
        • Abutment Clips Included: Yes
        • Anti-Rattle Spring Included: No
        • Inlet Thread Diameter: 10.0mm
        • Piston Material: Steel
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 2

      • Sponsored
        Sponsored
        Duralast Rear Driver Side Brake Caliper 19-B6036 for 2019 Nissan/Datsun Murano
        • Part # 19-B6036
        • SKU # 563866
        • Location: Rear

        Notes: Rear left, Disc Brake Caliper. Supplied with mounting bracket. Remanufactured caliper with installation hardware.

        • PRICE: 79.99
        • Location:: Rear
        • Casting Number: 4320, or, 4319
        • Pads Included: No
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: 3/8-24in
        • Piston Diameter: 43mm
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Mounting Bracket Included: Yes
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Front Passenger Side Brake Caliper D7101 for 2019 Nissan/Datsun Murano
        • Part # D7101
        • SKU # 247333
        • Location: Front

        Notes: Passenger side, Remanufactured part Supplied without mounting bracket

        • PRICE: 98.99
        • Location:: Front
        • Pads Included: No
        • Casting Number: ZA
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.0 x 33mm
        • Mounting Hardware Included: Yes
        • Piston Diameter: 45mm
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Friction Materials Standards Institute Pad Number: OEM Standard
        • Mounting Bracket Included: No
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 2

      • Sponsored
        Sponsored
        Duralast Front Driver Side Brake Caliper D7100 for 2019 Nissan/Datsun Murano
        • Part # D7100
        • SKU # 246358
        • Location: Front

        Notes: Driver side, Remanufactured part Supplied without mounting bracket

        • PRICE: 98.99
        • Location:: Front
        • Pads Included: No
        • Casting Number: ZA
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: M10-1.0 x 33mm
        • Mounting Hardware Included: Yes
        • Piston Diameter: 45mm
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Friction Materials Standards Institute Pad Number: OEM Standard
        • Mounting Bracket Included: No
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 2

      • Sponsored
        Sponsored
        Duralast Rear Passenger Side Brake Caliper D6037 for 2019 Nissan/Datsun Murano
        • Part # D6037
        • SKU # 458636
        • Location: Rear

        Notes: Passenger side, Remanufactured part Supplied without mounting bracket

        • PRICE: 69.99
        • Location:: Rear
        • Casting Number: 4320, or, 4319
        • Pads Included: No
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: 3/8-24in
        • Piston Diameter: 43mm
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Friction Materials Standards Institute Pad Number: OEM Standard
        • Mounting Bracket Included: No
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1

      • Sponsored
        Sponsored
        Duralast Rear Driver Side Brake Caliper D6036 for 2019 Nissan/Datsun Murano
        • Part # D6036
        • SKU # 458635
        • Location: Rear

        Notes: Driver side, Remanufactured part Supplied without mounting bracket

        • PRICE: 69.99
        • Location:: Rear
        • Casting Number: 4320, or, 4319
        • Pads Included: No
        • Pad Wear Sensor Included: No
        • Caliper Color: Grey
        • Bleeder Screw Thread Diameter: 3/8-24in
        • Piston Diameter: 43mm
        • Mounting Hardware Included: Yes
        • Caliper Casting Material: Cast Iron
        • Bleeder Screw Included: Yes
        • Friction Materials Standards Institute Pad Number: OEM Standard
        • Mounting Bracket Included: No
        • Abutment Clips Included: No
        • Anti-Rattle Spring Included: No
        • Inlet Thread Size: M10-1.0
        • Mounting Bolt Included: No
        • Piston Material: Steel
        • Caliper Finish: Rust Preventative
        • Caliper Slides Included: Yes
        • Grade Type: Regular
        • Piston Quantity: 1