2008 Toyota Camry Brake Caliper

Notes: Right, Built in USA. Remanufactured Part. Supplied with Mounting Bracket.

• PRICE: 77.99
• Location:: Front
• Caliper Casting Material: Cast Iron
• Piston Diameter: 64mm
• Grade Type: Regular
• Casting Number: 63-28, 13
• Mounting Bolt Included: No
• Bleeder Screw Included: Yes
• Mounting Hardware Included: Yes
• Caliper Color: Gray
• Bleeder Screw Length: 32.0mm
• Inlet Thread Diameter: 10mm
• Pads Included: No
• Mounting Bracket Included: Yes
• Pad Wear Sensor Included: No
• Abutment Clips Included: No
• Inlet Thread Pitch: 1.0mm
• Anti-Rattle Spring Included: No
• Caliper Finish: Rust Preventative
• Caliper Slides Included: Yes
• Piston Quantity: 1
• Inlet Thread Size: M10-1.0
• Bleeder Screw Thread Size: M7-1.0 x 32
• Bleeder Screw Thread Pitch: 1.0mm
• Piston Material: Steel
• Bleeder Screw Thread Diameter: 7.0mm

Notes: Left, Built in USA. Remanufactured Part. Supplied with Mounting Bracket.

• PRICE: 77.99
• Location:: Front
• Caliper Casting Material: Cast Iron
• Piston Diameter: 64mm
• Grade Type: Regular
• Mounting Bolt Included: No
• Bleeder Screw Included: Yes
• Mounting Hardware Included: Yes
• Caliper Color: Gray
• Bleeder Screw Length: 32.0mm
• Inlet Thread Diameter: 10mm
• Pads Included: No
• Mounting Bracket Included: Yes
• Pad Wear Sensor Included: No
• Abutment Clips Included: No
• Inlet Thread Pitch: 1.0mm
• Anti-Rattle Spring Included: No
• Caliper Finish: Rust Preventative
• Caliper Slides Included: Yes
• Piston Quantity: 1
• Inlet Thread Size: M10-1.0
• Bleeder Screw Thread Size: M7-1.0 x 32
• Bleeder Screw Thread Pitch: 1.0mm
• Casting Number: 63-28, 14
• Piston Material: Steel
• Bleeder Screw Thread Diameter: 7.0mm

Notes: Rear right, Remanufactured Part. Supplied with Mounting Bracket.

• PRICE: 105.99
• Location:: Rear
• Mounting Bolt Included: No
• Bleeder Screw Included: Yes
• Grade Type: Regular
• Mounting Hardware Included: Yes
• Piston Diameter: 38mm
• Bleeder Screw Length: 32.0mm
• Inlet Thread Diameter: 10mm
• Caliper Color: Gray
• Abutment Clips Included: No
• Pad Wear Sensor Included: No
• Pads Included: No
• Mounting Bracket Included: Yes
• Inlet Thread Pitch: 1.0mm
• Caliper Finish: Rust Preventative
• Caliper Casting Material: Aluminum
• Anti-Rattle Spring Included: No
• Inlet Thread Size: M10-1.0
• Caliper Slides Included: Yes
• Piston Quantity: 1
• Bleeder Screw Thread Size: M7-1.0 x 32
• Bleeder Screw Thread Pitch: 1.0mm
• Casting Number: 38, B
• Piston Material: Steel
• Bleeder Screw Thread Diameter: 7.0mm

Notes: Rear left, Remanufactured Part. Supplied with Mounting Bracket.

• PRICE: 105.99
• Location:: Rear
• Mounting Bolt Included: No
• Bleeder Screw Included: Yes
• Grade Type: Regular
• Mounting Hardware Included: Yes
• Casting Number: 38, A
• Piston Diameter: 38mm
• Bleeder Screw Length: 32.0mm
• Inlet Thread Diameter: 10mm
• Caliper Color: Gray
• Pad Wear Sensor Included: No
• Abutment Clips Included: No
• Mounting Bracket Included: Yes
• Pads Included: No
• Inlet Thread Pitch: 1.0mm
• Caliper Finish: Rust Preventative
• Caliper Casting Material: Aluminum
• Anti-Rattle Spring Included: No
• Inlet Thread Size: M10-1.0
• Piston Quantity: 1
• Caliper Slides Included: Yes
• Bleeder Screw Thread Size: M7-1.0 x 32
• Bleeder Screw Thread Pitch: 1.0mm
• Piston Material: Steel
• Bleeder Screw Thread Diameter: 7.0mm

Notes: Left, Japan Built. Remanufactured Part. Supplied with Mounting Bracket.

• PRICE: 77.99
• Location:: Front
• Inlet Thread Diameter: 10.0mm
• Caliper Casting Material: Cast Iron
• Grade Type: Regular
• Caliper Color: Silver
• Mounting Hardware Included: Yes
• Pads Included: No
• Abutment Clips Included: Yes
• Mounting Bracket Included: Yes
• Caliper Type: Floating
• Mounting Hole Diameter: 12.0mm
• Anti-Rattle Spring Included: Yes
• Caliper Slides Included: Yes
• Piston Quantity: 1
• Piston Material: Steel

Notes: Right, Japan Built. Remanufactured Part. Supplied with Mounting Bracket.

• PRICE: 77.99
• Location:: Front
• Inlet Thread Diameter: 10.0mm
• Caliper Casting Material: Cast Iron
• Grade Type: Regular
• Caliper Color: Silver
• Mounting Hardware Included: Yes
• Pads Included: No
• Abutment Clips Included: Yes
• Mounting Bracket Included: Yes
• Caliper Type: Floating
• Mounting Hole Diameter: 12.0mm
• Anti-Rattle Spring Included: Yes
• Caliper Slides Included: Yes
• Piston Quantity: 1
• Piston Material: Steel

Notes: Left, Remanufactured part *Built in USA. Supplied without Mounting Bracket.

• PRICE: 72.99
• Location:: Front
• Friction Materials Standards Institute Pad Number: Standard Replacement
• Caliper Casting Material: Cast Iron
• Piston Diameter: 64mm
• Grade Type: Regular
• Mounting Bolt Included: No
• Bleeder Screw Included: Yes
• Mounting Hardware Included: Yes
• Bleeder Screw Length: 32.0mm
• Inlet Thread Diameter: 10mm
• Caliper Color: Gray
• Pad Wear Sensor Included: No
• Pads Included: No
• Abutment Clips Included: No
• Inlet Thread Pitch: 1.0mm
• Anti-Rattle Spring Included: No
• Caliper Finish: Rust Preventative
• Caliper Slides Included: Yes
• Piston Quantity: 1
• Mounting Bracket Included: No
• Inlet Thread Size: M10-1.0
• Bleeder Screw Thread Size: M7-1.0 x 32
• Bleeder Screw Thread Pitch: 1.0mm
• Casting Number: 63-28, 14
• Piston Material: Steel
• Bleeder Screw Thread Diameter: 7.0mm

Notes: Left, Remanufactured part. Supplied without Mounting Bracket.

• PRICE: 101.99
• Location:: Rear
• Grade Type: Regular
• Mounting Bolt Included: No
• Bleeder Screw Included: Yes
• Mounting Hardware Included: Yes
• Casting Number: 38, A
• Piston Diameter: 38mm
• Bleeder Screw Length: 32.0mm
• Inlet Thread Diameter: 10mm
• Caliper Color: Gray
• Friction Materials Standards Institute Pad Number: OEM Standard
• Pad Wear Sensor Included: No
• Pads Included: No
• Abutment Clips Included: No
• Inlet Thread Pitch: 1.0mm
• Caliper Casting Material: Aluminum
• Anti-Rattle Spring Included: No
• Caliper Finish: Rust Preventative
• Caliper Slides Included: Yes
• Piston Quantity: 1
• Mounting Bracket Included: No
• Inlet Thread Size: M10-1.0
• Bleeder Screw Thread Size: M7-1.0 x 32
• Bleeder Screw Thread Pitch: 1.0mm
• Piston Material: Steel
• Bleeder Screw Thread Diameter: 7.0mm

Notes: Right, Remanufactured part. Supplied without Mounting Bracket.

• PRICE: 101.99
• Location:: Rear
• Grade Type: Regular
• Mounting Bolt Included: No
• Bleeder Screw Included: Yes
• Piston Diameter: 38mm
• Mounting Hardware Included: Yes
• Bleeder Screw Length: 32.0mm
• Inlet Thread Diameter: 10mm
• Caliper Color: Gray
• Abutment Clips Included: No
• Pad Wear Sensor Included: No
• Pads Included: No
• Inlet Thread Pitch: 1.0mm
• Caliper Finish: Rust Preventative
• Caliper Casting Material: Aluminum
• Anti-Rattle Spring Included: No
• Piston Quantity: 1
• Mounting Bracket Included: No
• Inlet Thread Size: M10-1.0
• Caliper Slides Included: Yes
• Bleeder Screw Thread Size: M7-1.0 x 32
• Bleeder Screw Thread Pitch: 1.0mm
• Piston Material: Steel
• Casting Number: 38, B
• Bleeder Screw Thread Diameter: 7.0mm

Notes: Right, Remanufactured part *Built in USA. Supplied without Mounting Bracket.

• PRICE: 72.99
• Location:: Front
• Caliper Casting Material: Cast Iron
• Piston Diameter: 64mm
• Grade Type: Regular
• Casting Number: 63-28, 13
• Mounting Bolt Included: No
• Bleeder Screw Included: Yes
• Mounting Hardware Included: Yes
• Bleeder Screw Length: 32.0mm
• Inlet Thread Diameter: 10mm
• Caliper Color: Gray
• Pad Wear Sensor Included: No
• Pads Included: No
• Abutment Clips Included: No
• Inlet Thread Pitch: 1.0mm
• Anti-Rattle Spring Included: No
• Caliper Finish: Rust Preventative
• Caliper Slides Included: Yes
• Piston Quantity: 1
• Mounting Bracket Included: No
• Inlet Thread Size: M10-1.0
• Bleeder Screw Thread Size: M7-1.0 x 32
• Bleeder Screw Thread Pitch: 1.0mm
• Piston Material: Steel
• Bleeder Screw Thread Diameter: 7.0mm