2010 Dodge Charger Brake Rotor

Buy Online. Pick Up In-Store.

What are you working on today?

Get an exact fit for your 2010 Dodge Charger
Don't forget your Brake Pads!  Save 15% on the complete brake job with Duralast®

1-21 of 21 Results

1-21 of 21 Results
      • Sponsored
        Sponsored
        Duralast Brake Rotor 43086 for 2010 Dodge Charger
        • Part # 43086
        • SKU # 951702
        • Location: Front
        Notes: Rotor only, *320 mm rotor. Except Heavy Duty brakes. *Replace in pairs for best performance
        • PRICE: 92.99
        • Location:: Front
        • Overall Height: 54.6mm
        • Discard Thickness: 26.5mm
        • Solid Or Vented Type Rotor: Vented
        • Center Hole Diameter: 3.0in
        • Mounting Bolt Hole Circle Diameter: 115mm
        • Directional or Non-Directional Brake Surface: Non-Directional
        • Inside Diameter: 164.0mm
        • ABS Tone Ring Included: No
        • Surface Type: Smooth
        • Outside Diameter: 320.1mm
        • Stud/Lug Hole Quantity: 5
        • Mounting Bolt Hole Quantity: 5
        • Nominal Thickness: 28.0mm
      • Sponsored
        Sponsored
        Duralast Brake Rotor 43149 for 2010 Dodge Charger
        • Part # 43149
        • SKU # 40113
        • Location: Front
        Notes: Rotor only, *Oversize/ Heavy Duty Rotor *360mm rotor *Replace in pairs for best performance
        • PRICE: 113.99
        • Location:: Front
        • Overall Height: 58.1mm
        • Discard Thickness: 30.0mm
        • Solid Or Vented Type Rotor: Vented
        • Material: Iron Alloy
        • Center Hole Diameter: 72.6mm
        • Mounting Bolt Hole Circle Diameter: 115.0mm
        • Directional or Non-Directional Brake Surface: Non-Directional
        • Rust Resistant Coating: No
        • Slotted: Yes
        • Inside Diameter: 162.0mm
        • Bolt Hole Quantity: 5
        • ABS Tone Ring Included: No
        • Surface Type: Slotted
        • Outside Diameter: 360.0mm
        • Stud/Lug Hole Quantity: 5
        • Mounting Bolt Hole Quantity: 5
        • Nominal Thickness: 32.0mm
      • Sponsored
        Sponsored
        Duralast Brake Rotor 43087 for 2010 Dodge Charger
        • Part # 43087
        • SKU # 951696
        • Location: Front
        Notes: Rotor only, *Sub model SXT, AWD. Sub model SE, CAN, USA region. With vented rear rotor. 345 mm rotor. Heavy duty brakes. *Replace in pairs for best performance
        • PRICE: 92.99
        • Location:: Front
        • Discard Thickness: 26.5mm
        • Slotted: No
        • Material: Iron Alloy
        • Outside Diameter: 345.0mm
      • Sponsored
        Sponsored
        Duralast Brake Rotor 43151 for 2010 Dodge Charger
        • Part # 43151
        • SKU # 40139
        • Location: Rear
        Notes: Rotor only, *350mm rotor. With Police Package *Replace in pairs for best performance
        • PRICE: 87.99
        • Location:: Rear
        • Overall Height: 67.0mm
        • Discard Thickness: 24.5mm
        • Solid Or Vented Type Rotor: Vented
        • Nominal Drum Diameter: 184.0mm
        • Material: Iron Alloy
        • Center Hole Diameter: 72.6mm
        • Mounting Bolt Hole Circle Diameter: 114.9mm
        • Directional or Non-Directional Brake Surface: Non-Directional
        • Rust Resistant Coating: No
        • Inside Diameter: 184.0mm
        • Slotted: No
        • Bolt Hole Quantity: N
        • ABS Tone Ring Included: No
        • Maximum Brake Diameter (Discard): 185.5mm
        • Surface Type: Smooth
        • Outside Diameter: 350.0mm
        • Stud/Lug Hole Quantity: 5
        • Mounting Bolt Hole Quantity: 5
        • Nominal Thickness: 26.0mm
      • Sponsored
        Sponsored
        Duralast Brake Rotor 53024 for 2010 Dodge Charger
        • Part # 53024
        • SKU # 838119
        • Location: Rear
        Notes: Rotor only, *Sub model R/T. AWD. Vented rotor. 320mm rotor *Replace in pairs for best performance
        • PRICE: 92.99
        • Location:: Rear
        • Overall Height: 2.64in
        • Discard Thickness: 0.81in
        • Solid Or Vented Type Rotor: Vented
        • Material: Iron Alloy
        • Center Hole Diameter: 2.86in
        • Mounting Bolt Hole Circle Diameter: 4.53in
        • Directional or Non-Directional Brake Surface: Non-Directional
        • Inside Diameter: 184.0mm
        • Slotted: No
        • ABS Tone Ring Included: No
        • Surface Type: Smooth
        • Outside Diameter: 12.6in
        • Stud/Lug Hole Quantity: 5
        • Mounting Bolt Hole Quantity: 5
        • Nominal Thickness: 22.0mm
      • Sponsored
        Sponsored
        Duralast Brake Rotor 43150 for 2010 Dodge Charger
        • Part # 43150
        • SKU # 951781
        • Location: Rear
        Notes: Rotor only, *350 mm rotor. 26mm. *Replace in pairs for best performance
        • PRICE: 89.99
        • Location:: Rear
        • Overall Height: 68.2mm
        • Discard Thickness: 26.0mm
        • Solid Or Vented Type Rotor: Vented
        • Nominal Drum Diameter: 161.0mm
        • Material: Iron Alloy
        • Center Hole Diameter: 72.6mm
        • Mounting Bolt Hole Circle Diameter: 114.9mm
        • Directional or Non-Directional Brake Surface: Non-Directional
        • Rust Resistant Coating: No
        • Inside Diameter: 161.0mm
        • Slotted: No
        • Bolt Hole Quantity: 5
        • ABS Tone Ring Included: No
        • Surface Type: Slotted
        • Maximum Brake Diameter (Discard): 184.5mm
        • Outside Diameter: 350.0mm
        • Stud/Lug Hole Quantity: 5
        • Mounting Bolt Hole Quantity: 5
        • Nominal Thickness: 28.0mm
      • Sponsored
        Sponsored
        Duralast Brake Rotor 53021 for 2010 Dodge Charger
        • Part # 53021
        • SKU # 838114
        • Location: Rear
        Notes: Rotor only, *RWD. Solid Rotor. 320mm rotor *Replace in pairs for best performance
        • PRICE: 82.99
        • Location:: Rear
        • Discard Thickness: 8.5mm
        • Slotted: No
        • Outside Diameter: 320.0mm
      • Sponsored
        Sponsored
        Duralast Gold Brake Rotor 43087DG for 2010 Dodge Charger
        • Part # 43087DG
        • SKU # 466944
        • Location: Front
        Notes: Rotor only, *Higher Carbon Content for maximum heat dissipation, quieter braking and longer life. *Z-Clad coating for superior rust protection and enhanced appearance. *Sub model R/T. Sub model SE, CAN, USA region. 345 mm rotor. Heavy duty brakes. *Replace in pairs for best performance
        • PRICE: 106.99
        • Location:: Front
        • Overall Height: 54.7mm
        • Discard Thickness: 26.5mm
        • Solid Or Vented Type Rotor: Vented
        • Material: Iron Alloy
        • Center Hole Diameter: 72.6mm
        • Mounting Bolt Hole Circle Diameter: 115.0mm
        • Directional or Non-Directional Brake Surface: Non-Directional
        • Rust Resistant Coating: No
        • Inside Diameter: 185.5mm
        • Slotted: No
        • ABS Tone Ring Included: No
        • Height: 54.7mm
        • Surface Type: Smooth
        • Outside Diameter: 345.0mm
        • Stud/Lug Hole Quantity: 5
        • Mounting Bolt Hole Quantity: 5
        • Nominal Thickness: 28.0mm
      • Sponsored
        Sponsored
        Duralast Gold Brake Rotor 43086DG for 2010 Dodge Charger
        • Part # 43086DG
        • SKU # 300557
        • Location: Front
        Notes: Rotor only, *Higher Carbon Content for maximum heat dissipation, quieter braking and longer life *Z-Clad coating for superior rust protection and enhanced appearance *320mm Rotor. Except Heavy Duty Brakes *Replace in pairs for best performance.
        • PRICE: 106.99
        • Location:: Front
        • Overall Height: 54.6mm
        • Discard Thickness: 26.5mm
        • Solid Or Vented Type Rotor: Vented
        • Material: Iron Alloy
        • Center Hole Diameter: 72.5mm
        • Mounting Bolt Hole Circle Diameter: 115.0mm
        • Directional or Non-Directional Brake Surface: Non-Directional
        • Rust Resistant Coating: No
        • Inside Diameter: 163.8mm
        • Slotted: No
        • Bolt Hole Quantity: 5
        • ABS Tone Ring Included: No
        • Height: 54.6mm
        • Surface Type: Smooth
        • Outside Diameter: 320.0mm
        • Stud/Lug Hole Quantity: 5
        • Mounting Bolt Hole Quantity: 5
        • Nominal Thickness: 28.0mm
      • Sponsored
        Sponsored
        Duralast Gold Brake Rotor 43149DG for 2010 Dodge Charger
        • Part # 43149DG
        • SKU # 418763
        • Location: Front
        Notes: Rotor only, *Higher Carbon Content for maximum heat dissipation, quieter braking and longer life *Z-Clad coating for superior rust protection and enhanced appearance *Oversize/ Heavy Duty Rotor. 360mm Rotor *Replace in pairs for best performance
        • PRICE: 131.99
        • Location:: Front
        • Overall Height: 58.1mm
        • Discard Thickness: 30.0mm
        • Solid Or Vented Type Rotor: Vented
        • Material: Iron Alloy
        • Center Hole Diameter: 72.6mm
        • Mounting Bolt Hole Circle Diameter: 115.0mm
        • Directional or Non-Directional Brake Surface: Non-Directional
        • Rust Resistant Coating: No
        • Slotted: Yes
        • Inside Diameter: 162.0mm
        • Bolt Hole Quantity: 5
        • ABS Tone Ring Included: No
        • Surface Type: Slotted
        • Outside Diameter: 360.0mm
        • Stud/Lug Hole Quantity: 5
        • Mounting Bolt Hole Quantity: 5
        • Nominal Thickness: 32.0mm
      • Sponsored
        Sponsored
        Duralast Gold Brake Rotor 53024DG for 2010 Dodge Charger
        • Part # 53024DG
        • SKU # 539293
        • Location: Rear
        Notes: Rotor only, *Higher Carbon Content for maximum heat dissipation, quieter braking and longer life *Z-Clad coating for superior rust protection and enhanced appearance *AWD. Vented rotor. 320mm rotor *Replace in pairs for best performance
        • PRICE: 106.99
        • Location:: Rear
        • Discard Thickness: 20.5mm
        • Slotted: No
        • Material: Iron Alloy
        • Outside Diameter: 320.0mm
      • Sponsored
        Sponsored
        Duralast Gold Brake Rotor 43151DG for 2010 Dodge Charger
        • Part # 43151DG
        • SKU # 466945
        • Location: Rear
        Notes: Rotor only, *Higher Carbon Content for maximum heat dissipation, quieter braking and longer life *Z-Clad coating for superior rust protection and enhanced appearance *350mm rotor *Replace in pairs for best performance
        • PRICE: 101.99
        • Location:: Rear
        • Overall Height: 67.0mm
        • Discard Thickness: 24.5mm
        • Solid Or Vented Type Rotor: Vented
        • Nominal Drum Diameter: 184.0mm
        • Material: Iron Alloy
        • Center Hole Diameter: 72.6mm
        • Mounting Bolt Hole Circle Diameter: 114.9mm
        • Directional or Non-Directional Brake Surface: Non-Directional
        • Rust Resistant Coating: No
        • Inside Diameter: 184.0mm
        • Slotted: No
        • ABS Tone Ring Included: No
        • Maximum Brake Diameter (Discard): 185.5mm
        • Surface Type: Smooth
        • Outside Diameter: 350.0mm
        • Stud/Lug Hole Quantity: 5
        • Mounting Bolt Hole Quantity: 5
        • Nominal Thickness: 26.0mm
      • Sponsored
        Sponsored
        Duralast Gold Brake Rotor 43150DG for 2010 Dodge Charger
        • Part # 43150DG
        • SKU # 418765
        • Location: Rear
        Notes: Rotor only, *Higher Carbon Content for maximum heat dissipation, quieter braking and longer life *Z-Clad coating for superior rust protection and enhanced appearance *350 mm rotor. 26mm *Replace in pairs for best performance
        • PRICE: 103.99
        • Location:: Rear
        • Overall Height: 68.2mm
        • Discard Thickness: 26.0mm
        • Solid Or Vented Type Rotor: Vented
        • Nominal Drum Diameter: 161.0mm
        • Material: Iron Alloy
        • Center Hole Diameter: 72.6mm
        • Mounting Bolt Hole Circle Diameter: 114.9mm
        • Directional or Non-Directional Brake Surface: Non-Directional
        • Rust Resistant Coating: No
        • Inside Diameter: 161.0mm
        • Slotted: Yes
        • ABS Tone Ring Included: No
        • Surface Type: Slotted
        • Maximum Brake Diameter (Discard): 184.5mm
        • Outside Diameter: 350.0mm
        • Stud/Lug Hole Quantity: 5
        • Mounting Bolt Hole Quantity: 5
        • Nominal Thickness: 28.0mm
      • Sponsored
        Sponsored
        Duralast Severe Duty Brake Rotor 43086SD for 2010 Dodge Charger
        • Part # 43086SD
        • SKU # 1140540
        • Location: Front
        Notes: Rotor only, *Ideal for towing, heavy hauling and frequent stopping. *320 mm rotor. Except Heavy Duty brakes. *Replace in pairs for best performance
        • PRICE: 121.99
        • Location:: Front
        • Overall Height: 54.6mm
        • Discard Thickness: 26.5mm
        • Solid Or Vented Type Rotor: Vented
        • Material: Iron Alloy
        • Center Hole Diameter: 72.5mm
        • Mounting Bolt Hole Circle Diameter: 115.0mm
        • Directional or Non-Directional Brake Surface: Non-Directional
        • Rust Resistant Coating: No
        • Inside Diameter: 163.8mm
        • Bolt Hole Quantity: 5
        • ABS Tone Ring Included: No
        • Surface Type: Smooth
        • Outside Diameter: 320.0mm
        • Stud/Lug Hole Quantity: 5
        • Mounting Bolt Hole Quantity: 5
        • Nominal Thickness: 28.0mm
      • Sponsored
        Sponsored
        Duralast Gold Brake Rotor 53021DG for 2010 Dodge Charger
        • Part # 53021DG
        • SKU # 344875
        • Location: Rear
        Notes: Rotor only, *Higher Carbon Content for maximum heat dissipation, quieter braking and longer life *Z-Clad coating for superior rust protection and enhanced appearance *RWD. Solid Rotor. 320mm rotor *Replace in pairs for best performance
        • PRICE: 95.49
        • Location:: Rear
        • Discard Thickness: 8.5mm
        • Slotted: No
        • Material: Iron Alloy
        • Outside Diameter: 320.0mm
      • Sponsored
        Sponsored
        Duralast Severe Duty Brake Rotor 53024SD for 2010 Dodge Charger
        • Part # 53024SD
        • SKU # 1267079
        • Location: Rear
        Notes: Rotor only, *Ideal for towing, heavy hauling and frequent stopping *Sub model R/T. AWD. Vented rotor. 320mm rotor *Replace in pairs for best performance
        • PRICE: 121.99
        • Location:: Rear
        • Overall Height: 67.0mm
        • Discard Thickness: 20.5mm
        • Solid Or Vented Type Rotor: Vented
        • Material: Iron Alloy
        • Center Hole Diameter: 72.6mm
        • Mounting Bolt Hole Circle Diameter: 115.0mm
        • Directional or Non-Directional Brake Surface: Non-Directional
        • Rust Resistant Coating: No
        • Inside Diameter: 183.9mm
        • Bolt Hole Quantity: 5
        • ABS Tone Ring Included: No
        • Maximum Brake Diameter (Discard): 185.5mm
        • Surface Type: Smooth
        • Outside Diameter: 320.0mm
        • Stud/Lug Hole Quantity: 5
        • Mounting Bolt Hole Quantity: 5
        • Nominal Thickness: 22.0mm
      • Sponsored
        Sponsored
        Duralast Severe Duty Brake Rotor 53021SD for 2010 Dodge Charger
        • Part # 53021SD
        • SKU # 1267083
        • Location: Rear
        Notes: Rotor only, *Ideal for towing, heavy hauling and frequent stopping *RWD. Solid Rotor. 320mm rotor *Replace in pairs for best performance
        • PRICE: 111.99
        • Location:: Rear
        • Overall Height: 67.1mm
        • Discard Thickness: 8.5mm
        • Solid Or Vented Type Rotor: Solid
        • Nominal Drum Diameter: 184.0mm
        • Material: Iron Alloy
        • Center Hole Diameter: 72.6mm
        • Mounting Bolt Hole Circle Diameter: 115.0mm
        • Directional or Non-Directional Brake Surface: Non-Directional
        • Rust Resistant Coating: No
        • Inside Diameter: 184.0mm
        • Bolt Hole Quantity: 5
        • ABS Tone Ring Included: No
        • Maximum Brake Diameter (Discard): 185.5mm
        • Surface Type: Smooth
        • Outside Diameter: 320.0mm
        • Stud/Lug Hole Quantity: 5
        • Mounting Bolt Hole Quantity: 5
        • Nominal Thickness: 10.0mm
      • Sponsored
        Sponsored
        Brembo Brake Rotor 09.A402.11 for 2010 Dodge Charger
        • Part # 09.A402.11
        • SKU # 1080057
        • Location: Front
        Notes: Sub model SXT. RWD. MEX region. Except Heavy Duty Brakes. Except Performance Brakes. UV Coated.
        • PRICE: 139.99
        • Location:: Front
        • Overall Height: 545.0mm
        • Mounting Bolt Hole Circle Diameter: 72.6mm
        • Discard Thickness: 26.5mm
        • Rust Resistant Coating: Yes
        • Solid Or Vented Type Rotor: vented
        • ABS Tone Ring Included: No
        • Material: High Carbon Cast Iron
        • Outside Diameter: 320.0mm
        • Stud/Lug Hole Quantity: 5
        • Nominal Thickness: 280.0mm
        • Center Hole Diameter: 72.6mm
      • Sponsored
        Sponsored
        Brembo Brake Rotor 09.A404.11 for 2010 Dodge Charger
        • Part # 09.A404.11
        • SKU # 1079988
        • Location: Front
        Notes: Sub model R/T. MEX region. UV Coated.
        • PRICE: 177.99
        • Location:: Front
        • Overall Height: 545.0mm
        • Mounting Bolt Hole Circle Diameter: 72.6mm
        • Discard Thickness: 26.5mm
        • Rust Resistant Coating: Yes
        • Solid Or Vented Type Rotor: vented
        • ABS Tone Ring Included: No
        • Material: High Carbon Cast Iron
        • Outside Diameter: 345.0mm
        • Stud/Lug Hole Quantity: 5
        • Nominal Thickness: 280.0mm
        • Center Hole Diameter: 72.6mm
      • Sponsored
        Sponsored
        Brembo Brake Rotor 09.A183.11 for 2010 Dodge Charger
        • Part # 09.A183.11
        • SKU # 1088941
        • Location: Front
        Notes: MEX region. UV Coated.
        • PRICE: 192.99
        • Location:: Front
        • Overall Height: 580.0mm
        • Mounting Bolt Hole Circle Diameter: 166.0mm
        • Discard Thickness: 30mm
        • Rust Resistant Coating: Yes
        • Solid Or Vented Type Rotor: vented
        • ABS Tone Ring Included: No
        • Material: Grey Cast Iron
        • Outside Diameter: 360.0mm
        • Stud/Lug Hole Quantity: 5
        • Nominal Thickness: 320.0mm
      • Sponsored
        Sponsored
        Brembo Brake Rotor 08.A403.11 for 2010 Dodge Charger
        • Part # 08.A403.11
        • SKU # 1088965
        • Location: Rear
        Notes: Sub model SXT. RWD. MEX region. UV Coated.
        • PRICE: 98.49
        • Location:: Rear
        • Overall Height: 670.0mm
        • Mounting Bolt Hole Circle Diameter: 72.6mm
        • Discard Thickness: 8.5mm
        • Rust Resistant Coating: Yes
        • Solid Or Vented Type Rotor: solid
        • ABS Tone Ring Included: No
        • Material: Grey Cast Iron
        • Outside Diameter: 320.0mm
        • Stud/Lug Hole Quantity: 5
        • Nominal Thickness: 100.0mm
        • Center Hole Diameter: 72.6mm

      Customer

      Reviews

      Reviews for


      Very Good quality over stock rotor

      Jason

      in 13 days

      I love looking through the wheels on my Dodge Charger Road and Track and not seeing the ugly rusted stock rotors. The stock rotors had a slight shimmy felt in the steering wheel that is also gone now. The Duralast rotors and ceramic pads made a huge difference. Highly recommended.

      What kind of vehicle do you drive? 2010 Dodge Charger R/T

      I love looking through the wheels on my Dodge Charger Road and Track and not seeing the ugly rusted stock rotors. The stock rotors had a slight shimmy felt in the steering wheel that is also gone now. The Duralast rotors and ceramic pads made a huge difference. Highly recommended.

      What kind of vehicle do you drive? 2010 Dodge Charger R/T

      Reviews for


      Very Good quality over rusted stock rotors

      Jason

      in 8 months

      I love the rust proof coating and no longer look through the wheels on my Dodge Charger Road and Track and see rusty old factory rotors. The slight shimmy under hard braking felt in the steering wheel is gone as well. The rotors were nicely packaged and in stock at my local Autozone store.

      What kind of vehicle do you drive? 2010 Dodge Charger R/T

      I love the rust proof coating and no longer look through the wheels on my Dodge Charger Road and Track and see rusty old factory rotors. The slight shimmy under hard braking felt in the steering wheel is gone as well. The rotors were nicely packaged and in stock at my local Autozone store.

      What kind of vehicle do you drive? 2010 Dodge Charger R/T