2011 Ford Focus Brake Rotor

Buy Online. Pick Up In-Store.

What are you working on today?

Get an exact fit for your 2011 Ford Focus
Don't forget your Brake Pads! Save 15% on the complete brake job with Duralast®

1-2 of 2 Results

1-2 of 2 Results
      • Sponsored
        Sponsored
        Duralast Brake Rotor 42257DL for 2011 Ford Focus
        • Part # 42257DL
        • SKU # 204645
        • Location: Front

        Notes: Rotor only, *275 mm rotor. *Coated on hat and edge for rust prevention. *Replace in pairs for best performance

        • PRICE: 97.99
        • Location:: Front
        • Overall Height: 45mm
        • Mounting Bolt Hole Circle Diameter: 107.9mm
        • Discard Thickness: 23mm
        • Directional or Non-Directional Brake Surface: Non-Directional
        • Solid Or Vented Type Rotor: Vented
        • Slotted: No
        • ABS Tone Ring Included: No
        • Material: SAE G11H18 Gray Iron
        • Surface Type: Smooth
        • Outside Diameter: 275mm
        • Stud/Lug Hole Quantity: 4

      • Sponsored
        Sponsored
        Duralast Gold Brake Rotor 42257DG for 2011 Ford Focus
        • Part # 42257DG
        • SKU # 539226
        • Location: Front

        Notes: Rotor only, *Higher Carbon Content for maximum heat dissipation, quieter braking and longer life. *Z-Clad coating for superior rust protection and enhanced appearance. *275 mm rotor. *Replace in pairs for best performance

        • PRICE: 117.99
        • Location:: Front
        • Overall Height: 45.0mm
        • Discard Thickness: 23.0mm
        • Solid Or Vented Type Rotor: Vented
        • Material: Iron Alloy
        • Center Hole Diameter: 63.6mm
        • Mounting Bolt Hole Circle Diameter: 107.9mm
        • Directional or Non-Directional Brake Surface: Non-Directional
        • Rust Resistant Coating: Yes
        • Inside Diameter: 136.3mm
        • Slotted: No
        • Bolt Hole Quantity: 4
        • ABS Tone Ring Included: No
        • Height: 45.0mm
        • Surface Type: Smooth
        • Outside Diameter: 275.0mm
        • Stud/Lug Hole Quantity: 4
        • Mounting Bolt Hole Quantity: 4
        • Nominal Thickness: 25.0mm

      Customer

      Reviews

      Reviews for


      2011 Ford Focus Brake Rotors - Nice

      DiMag

      in 3 months

      Billed as long lasting. Comes coated with a thin, protective layer to prevent rusting that quickly burns off. No packing oil to remove. Should have enough thickness to allow resurfacing in 35k miles. Great price with discount.

      What kind of vehicle do you drive? 2011 Ford Focus

      Billed as long lasting. Comes coated with a thin, protective layer to prevent rusting that quickly burns off. No packing oil to remove. Should have enough thickness to allow resurfacing in 35k miles. Great price with discount.

      What kind of vehicle do you drive? 2011 Ford Focus