2001 Honda Accord Brake Rotor

Buy Online. Pick Up In-Store.

Don't forget your Brake Pads!  Save 15% on the complete brake job with Duralast®

1-12 of 12 Results

    1-12 of 12 Results

    • Sponsored
      Sponsored
      Duralast Brake Rotor 31257DL for 2001 Honda Accord
      • Location: Front
      • Part # 31257DL
      • SKU # 268221
        for pickup availability
        Standard Delivery by Feb. 27
        Notes: Rotor only, *With 282mm Rotors *Replace in pairs for best performance
        • PRICE: 74.99
        • Location:: Front
        • ABS Tone Ring Included: No
        • Center Hole Diameter: 64.0mm
        • Discard Thickness: 21.0mm
        • Nominal Thickness: 23.0mm
        • Outside Diameter: 281.9mm
        • Solid Or Vented Type Rotor: Vented
        • Stud/Lug Hole Quantity: 5
        • Inside Diameter: 142.0mm
        • Surface Type: Smooth
        • Overall Height: 47.0mm
        • Mounting Bolt Hole Circle Diameter: 114.3mm
        • Mounting Bolt Hole Quantity: 5
        • Directional or Non-Directional Brake Surface: Non-Directional
      • Sponsored
        Sponsored
        Duralast Brake Rotor 31243DL for 2001 Honda Accord
        • Location: Front
        • Part # 31243DL
        • SKU # 238796
          for pickup availability
          Standard Delivery by Feb. 27
          Notes: Rotor only, *Replace in pairs for best performance
          • PRICE: 54.99
          • Location:: Front
          • Material: Iron Alloy
          • Discard Thickness: 21.0mm
          • Outside Diameter: 260.0mm
          • Slotted: No
        • Sponsored
          Sponsored
          Duralast Brake Rotor 31245DL for 2001 Honda Accord
          • Location: Rear
          • Part # 31245DL
          • SKU # 231719
            for pickup availability
            Standard Delivery by Feb. 27
            Notes: Rotor only, *Replace in pairs for best performance
            • PRICE: 39.99
            • Location:: Rear
            • ABS Tone Ring Included: No
            • Discard Thickness: 8.0mm
            • Height: 48mm
            • Center Hole Diameter: 64.2mm
            • Material: Iron Alloy
            • Nominal Thickness: 9.0mm
            • Inside Diameter: 157.5mm
            • Overall Height: 48.3mm
            • Solid Or Vented Type Rotor: Solid
            • Surface Type: Smooth
            • Stud/Lug Hole Quantity: 5
            • Mounting Bolt Hole Circle Diameter: 114.3mm
            • Outside Diameter: 260.0mm
            • Slotted: No
            • Rust Resistant Coating: Yes
            • Mounting Bolt Hole Quantity: 5
            • Directional or Non-Directional Brake Surface: Non-Directional
          • Sponsored
            Sponsored
            Duralast Brake Rotor 31244DL for 2001 Honda Accord
            • Location: Rear
            • Part # 31244DL
            • SKU # 238797
              for pickup availability
              Standard Delivery by Feb. 27
              Notes: Rotor only, *Replace in pairs for best performance
              • PRICE: 57.99
              • Location:: Rear
              • Discard Thickness: 8.0mm
              • ABS Tone Ring Included: No
              • Overall Height: 48.0mm
              • Material: Iron Alloy
              • Inside Diameter: 155.0mm
              • Center Hole Diameter: 64.0mm
              • Nominal Thickness: 9.0mm
              • Stud/Lug Hole Quantity: 4
              • Mounting Bolt Hole Quantity: 4
              • Solid Or Vented Type Rotor: Solid
              • Surface Type: Smooth
              • Outside Diameter: 260.0mm
              • Slotted: No
              • Mounting Bolt Hole Circle Diameter: 114.0mm
              • Directional or Non-Directional Brake Surface: Non-Directional
            • Sponsored
              Sponsored
              Duralast Gold Brake Rotor 31243DG for 2001 Honda Accord
              • Location: Front
              • Part # 31243DG
              • SKU # 300543
                for pickup availability
                Standard Delivery by Feb. 27
                Notes: Rotor only, *Higher carbon content for maximum heat dissipation, quieter braking and longer life. *Z-Clad coating for superior rust protection and enhanced appearance. *Replace in pairs for best performance
                • PRICE: 63.49
                • Location:: Front
                • ABS Tone Ring Included: No
                • Material: Iron Alloy
                • Grade Type: Regular
                • Center Hole Diameter: 64.2mm
                • Discard Thickness: 21.0mm
                • Nominal Thickness: 23.1mm
                • Stud/Lug Hole Quantity: 4
                • Mounting Bolt Hole Quantity: 4
                • Solid Or Vented Type Rotor: Vented
                • Surface Type: Smooth
                • Outside Diameter: 260.0mm
                • Bolt Hole Quantity: 4
                • Mounting Bolt Hole Circle Diameter: 114.3mm
                • Slotted: No
                • Height: 47.2mm
                • Rust Resistant Coating: Yes
                • Inside Diameter: 141.7mm
                • Overall Height: 47.2mm
                • Directional or Non-Directional Brake Surface: Non-Directional
              • Sponsored
                Sponsored
                Duralast Gold Brake Rotor 31257DG for 2001 Honda Accord
                • Location: Front
                • Part # 31257DG
                • SKU # 300545
                  for pickup availability
                  Standard Delivery by Feb. 27
                  Notes: Rotor only, *Higher Carbon Content for maximum heat dissipation, quieter braking and longer life. *Z-Clad coating for superior rust protection and enhanced appearance. *With 282 mm rotor. *Replace in pairs for best performance
                  • PRICE: 86.49
                  • Location:: Front
                  • ABS Tone Ring Included: No
                  • Material: Iron Alloy
                  • Outside Diameter: 282.0mm
                  • Grade Type: Regular
                  • Center Hole Diameter: 64.0mm
                  • Inside Diameter: 142.4mm
                  • Discard Thickness: 21.0mm
                  • Height: 47mm
                  • Nominal Thickness: 23.0mm
                  • Bolt Hole Quantity: 5
                  • Solid Or Vented Type Rotor: Vented
                  • Surface Type: Smooth
                  • Stud/Lug Hole Quantity: 5
                  • Mounting Bolt Hole Circle Diameter: 114.3mm
                  • Overall Height: 47.0mm
                  • Slotted: No
                  • Mounting Bolt Hole Quantity: 5
                  • Directional or Non-Directional Brake Surface: Non-Directional
                  • Rust Resistant Coating: Yes
                • Sponsored
                  Sponsored
                  Duralast Severe Duty Brake Rotor 31257SD for 2001 Honda Accord
                  • Location: Front
                  • Part # 31257SD
                  • SKU # 1215316
                    for pickup availability
                    Standard Delivery by Feb. 27
                    Notes: Rotor only, *Ideal for towing, heavy hauling and frequent stopping. *With 282 mm Rotors. *Replace in pairs for best performance
                    • PRICE: 106.99
                    • Location:: Front
                    • ABS Tone Ring Included: No
                    • Material: Iron Alloy
                    • Inside Diameter: 142.4mm
                    • Outside Diameter: 282.0mm
                    • Center Hole Diameter: 64.0mm
                    • Discard Thickness: 21.0mm
                    • Nominal Thickness: 23.0mm
                    • Solid Or Vented Type Rotor: Vented
                    • Surface Type: Smooth
                    • Stud/Lug Hole Quantity: 5
                    • Overall Height: 47.0mm
                    • Mounting Bolt Hole Circle Diameter: 114.3mm
                    • Rust Resistant Coating: Yes
                    • Mounting Bolt Hole Quantity: 5
                    • Directional or Non-Directional Brake Surface: Non-Directional
                  • Sponsored
                    Sponsored
                    Duralast Gold Brake Rotor 31245DG for 2001 Honda Accord
                    • Location: Rear
                    • Part # 31245DG
                    • SKU # 336821
                      for pickup availability
                      Standard Delivery by Feb. 27
                      Notes: Rotor only, *Higher Carbon Content for maximum heat dissipation, quieter braking and longer life *Z-Clad coating for superior rust protection and enhanced appearance *Replace in pairs for best performance
                      • PRICE: 45.99
                      • Location:: Rear
                      • Discard Thickness: 8.0mm
                      • ABS Tone Ring Included: No
                      • Material: Iron Alloy
                      • Center Hole Diameter: 64.2mm
                      • Nominal Thickness: 9.0mm
                      • Inside Diameter: 157.5mm
                      • Overall Height: 48.3mm
                      • Solid Or Vented Type Rotor: Solid
                      • Surface Type: Smooth
                      • Stud/Lug Hole Quantity: 5
                      • Outside Diameter: 260.0mm
                      • Mounting Bolt Hole Circle Diameter: 114.3mm
                      • Slotted: No
                      • Rust Resistant Coating: Yes
                      • Mounting Bolt Hole Quantity: 5
                      • Height: 48.3mm
                      • Directional or Non-Directional Brake Surface: Non-Directional
                    • Sponsored
                      Sponsored
                      Brembo Brake Rotor 45251S87A00 for 2001 Honda Accord
                      • Location: Front
                      • Part # 09.7932.11
                      • SKU # 629206
                        for pickup availability
                        Standard Delivery by Feb. 27
                        Notes: Front, Disc Brake Rotor. Premium UV coated OEM equivalent rotor. Quantity per car: 2.
                        • PRICE: 112.99
                        • Location:: Front
                        • ABS Tone Ring Included: No
                        • Discard Thickness: 21mm
                        • Outside Diameter: 282.0mm
                        • Center Hole Diameter: 64.0mm
                        • Material: Grey Cast Iron
                        • Solid Or Vented Type Rotor: Vented
                        • Overall Height: 470.0mm
                        • Mounting Bolt Hole Circle Diameter: 64.0mm
                        • Stud/Lug Hole Quantity: 5
                        • Nominal Thickness: 230.0mm
                        • Rust Resistant Coating: Yes
                      • Sponsored
                        Sponsored
                        Brembo Brake Rotor 45251S84A01 for 2001 Honda Accord
                        • Location: Front
                        • Part # 09.6753.21
                        • SKU # 629200
                          for pickup availability
                          Standard Delivery by Feb. 27
                          Notes: Front, Disc Brake Rotor. Sub model EX. Premium UV coated OEM equivalent rotor. Quantity per car: 2.
                          • PRICE: 71.99
                          • Location:: Front
                          • ABS Tone Ring Included: No
                          • Discard Thickness: 21mm
                          • Center Hole Diameter: 64.2mm
                          • Overall Height: 471.0mm
                          • Mounting Bolt Hole Circle Diameter: 64.2mm
                          • Material: Grey Cast Iron
                          • Stud/Lug Hole Quantity: 4
                          • Solid Or Vented Type Rotor: Vented
                          • Nominal Thickness: 230.0mm
                          • Outside Diameter: 260.0mm
                          • Rust Resistant Coating: Yes
                        • Sponsored
                          Sponsored
                          Brembo Brake Rotor 08.5803.81 for 2001 Honda Accord
                          • Location: Rear
                          • Part # 08.5803.81
                          • SKU # 1335687
                            for pickup availability
                            Standard Delivery by Feb. 27
                            Notes: Rear, Disc Brake Rotor. Premium UV coated OEM equivalent rotor. Quantity per car: 2.
                            • PRICE: 67.49
                            • Location:: Rear
                            • ABS Tone Ring Included: No
                            • Nominal Thickness: 90.0mm
                            • Material: Grey Cast Iron
                            • Solid Or Vented Type Rotor: Solid
                            • Overall Height: 480.0mm
                            • Discard Thickness: 8mm
                            • Mounting Bolt Hole Circle Diameter: 128.0mm
                            • Stud/Lug Hole Quantity: 5
                            • Outside Diameter: 260.0mm
                            • Rust Resistant Coating: Yes
                          • Sponsored
                            Sponsored
                            Brembo Brake Rotor 08.5803.21 for 2001 Honda Accord
                            • Location: Rear
                            • Part # 08.5803.21
                            • SKU # 1335695
                              for pickup availability
                              Standard Delivery by Feb. 27
                              Notes: Rear, Disc Brake Rotor. Sub model EX. Premium UV coated OEM equivalent rotor. Quantity per car: 2.
                              • PRICE: 79.99
                              • Location:: Rear
                              • ABS Tone Ring Included: No
                              • Nominal Thickness: 90.0mm
                              • Material: Grey Cast Iron
                              • Stud/Lug Hole Quantity: 4
                              • Solid Or Vented Type Rotor: Solid
                              • Overall Height: 480.0mm
                              • Discard Thickness: 8mm
                              • Center Hole Diameter: 64.1mm
                              • Outside Diameter: 260.0mm
                              • Mounting Bolt Hole Circle Diameter: 64.1mm
                              • Rust Resistant Coating: Yes

                            Customer

                            Reviews

                            Reviews for


                            They Last

                            RBSC

                            in 4 years

                            I accidentally let the brakes scrape part of the rotor and had to replace. I was debating on the gold model but decided to stick with the regular rotors. I have not had a need to get higher quality model since my car is not doing any fast and the furious movies where almost perfect braking is required. I use duralast rotors on my cars, trucks, and recommend to anyone that wants quality parts.

                            What kind of vehicle do you drive? 2001 Honda Accord V6

                            Reviews for


                            These rotors are worth the extra $$

                            Joshua

                            in a month

                            So far these rotors have worked perfectly on my 2001 Honda Accord EX. I have EBC green stuff brake pads installed and haven't had any issues with them. The last set of rotors I used warped after 6000 miles and they were slotted kind. These so far (4000+ miles) have not warped and I've had to make some hard stops with them.

                            What kind of vehicle do you drive? 2001 Honda Accord EX