2011 Honda Accord Brake Rotor

Buy Online. Pick Up In-Store.

What are you working on today?

Get an exact fit for your 2011 Honda Accord
Don't forget your Brake Pads! Save 15% on the complete brake job with Duralast®

1-4 of 4 Results

1-4 of 4 Results
      • Sponsored
        Sponsored
        Duralast Brake Rotor 31275DL for 2011 Honda Accord
        • Part # 31275DL
        • SKU # 332681
        • Location: Front

        Notes: Rotor only, *300mm rotor diameter *Replace in pairs for best performance

        • PRICE: 94.49
        • Location:: Front
        • Overall Height: 47.2mm
        • Discard Thickness: 26.0mm
        • Solid Or Vented Type Rotor: Vented
        • Material: Iron Alloy
        • Center Hole Diameter: 64.1mm
        • Mounting Bolt Hole Circle Diameter: 114.3mm
        • Rust Resistant Coating: Yes
        • Inside Diameter: 148.4mm
        • Slotted: No
        • Disc Finish: Non-Directional
        • ABS Tone Ring Included: No
        • Height: 47.2mm
        • Surface Type: Smooth
        • Outside Diameter: 300.0mm
        • Stud/Lug Hole Quantity: 5
        • Mounting Bolt Hole Quantity: 5
        • Nominal Thickness: 28.1mm

      • Sponsored
        Sponsored
        Duralast Brake Rotor 44594DL for 2011 Honda Accord
        • Part # 44594DL
        • SKU # 443789
        • Location: Rear

        Notes: Rotor only, *Coated on hat and edge for rust prevention. *Replace in pairs for best performance

        • PRICE: 57.99
        • Location:: Rear
        • Overall Height: 48.7mm
        • Discard Thickness: 8.0mm
        • Solid Or Vented Type Rotor: Solid
        • Material: Iron Alloy
        • Center Hole Diameter: 64.1mm
        • Mounting Bolt Hole Circle Diameter: 114.3mm
        • Rust Resistant Coating: Yes
        • Inside Diameter: 156.6mm
        • Slotted: No
        • Disc Finish: Non-Directional
        • ABS Tone Ring Included: No
        • Height: 48.7mm
        • Surface Type: Smooth
        • Outside Diameter: 282.0mm
        • Stud/Lug Hole Quantity: 5
        • Mounting Bolt Hole Quantity: 5
        • Nominal Thickness: 9.0mm

      • Sponsored
        Sponsored
        Duralast Gold Brake Rotor 31275DG for 2011 Honda Accord
        • Part # 31275DG
        • SKU # 336606
        • Location: Front

        Notes: Rotor only, *Higher carbon content for maximum heat dissipation, quieter braking and longer life. *Z-Clad coating for superior rust protection and enhanced appearance. *Replace in pairs for best performance

        • PRICE: 113.99
        • Location:: Front
        • Discard Thickness: 26.0mm
        • Slotted: No
        • Material: Iron Alloy
        • Outside Diameter: 300.0mm

      • Sponsored
        Sponsored
        Duralast Gold Brake Rotor 44594DG for 2011 Honda Accord
        • Part # 44594DG
        • SKU # 466952
        • Location: Rear

        Notes: Rotor only, *Higher carbon content for maximum heat dissipation, quieter braking and longer life. *Z-Clad coating for superior rust protection and enhanced appearance. *Replace in pairs for best performance

        • PRICE: 69.99
        • Location:: Rear
        • Discard Thickness: 8.0mm
        • Slotted: No
        • Material: Iron Alloy
        • Outside Diameter: 282.0mm

      Customer

      Reviews

      Reviews for


      Easy install and looks really clean

      Pocoplante

      in 8 months

      I like that they are black but eventually they will rust I can already tell and it’s been a month so I will paint them w some caliper paints to keep them from rusting but good quality rotors both front and back

      What kind of vehicle do you drive? This was for my 2011 Honda Accord SE

      I like that they are black but eventually they will rust I can already tell and it’s been a month so I will paint them w some caliper paints to keep them from rusting but good quality rotors both front and back

      What kind of vehicle do you drive? This was for my 2011 Honda Accord SE

      Reviews for


      Very good rotor!

      AMA

      in a year

      I used to work in a gray iron foundry, and I know these rotors are made with ductile iron which contains a magnesium treatment when molten. This adds ductility to the iron and through the roof wear resistance, and nearly impossible to warp. Married to some ceramics pads, and your set for life. Definetly worth the extra cost if your going to have that car for a while. I've put these on two vehicles now and couldn't be happier with them.

      What kind of vehicle do you drive? 2011 Honda Accord

      I used to work in a gray iron foundry, and I know these rotors are made with ductile iron which contains a magnesium treatment when molten. This adds ductility to the iron and through the roof wear resistance, and nearly impossible to warp. Married to some ceramics pads, and your set for life. Definetly worth the extra cost if your going to have that car for a while. I've put these on two vehicles now and couldn't be happier with them.

      What kind of vehicle do you drive? 2011 Honda Accord