2010 Nissan/Datsun Pathfinder Brake Rotor

Notes: Rotor only, *320mm rotor. *Replace in pairs for best performance *320 mm rotor. *Replace in pairs for best performance

• PRICE: 74.99
• Location:: Front
• Overall Height: 38.0mm
• Discard Thickness: 26.0mm
• Solid Or Vented Type Rotor: Vented
• Material: Iron Alloy
• Center Hole Diameter: 68.0mm
• Mounting Bolt Hole Circle Diameter: 114.3mm
• Directional or Non-Directional Brake Surface: Non-Directional
• Rust Resistant Coating: No
• Slotted: No
• Inside Diameter: 175.0mm
• ABS Tone Ring Included: No
• Surface Type: Smooth
• Outside Diameter: 320.0mm
• Stud/Lug Hole Quantity: 6
• Mounting Bolt Hole Quantity: 6
• Nominal Thickness: 28.0mm

Notes: Rotor only, *296 mm rotor. *Replace in pairs for best performance

• PRICE: 69.99
• Location:: Front
• Discard Thickness: 26.0mm
• Slotted: No
• Material: Iron Alloy
• Outside Diameter: 296.0mm

Notes: Rotor only, *308 mm rotor. *Replace in pairs for best performance

• PRICE: 92.99
• Location:: Rear

Notes: Rotor only, *Higher Carbon Content for maximum heat dissipation, quieter braking and longer life *Z-Clad coating for superior rust protection and enhanced appearance *296mm Rotor *Replace in pairs for best performance

• PRICE: 83.99
• Location:: Front
• Overall Height: 38.0mm
• Discard Thickness: 26.0mm
• Solid Or Vented Type Rotor: Vented
• Material: Iron Alloy
• Center Hole Diameter: 68.0mm
• Mounting Bolt Hole Circle Diameter: 114.3mm
• Directional or Non-Directional Brake Surface: Non-Directional
• Rust Resistant Coating: No
• Inside Diameter: 160.9mm
• Slotted: No
• ABS Tone Ring Included: No
• Height: 38mm
• Surface Type: Smooth
• Outside Diameter: 296.0mm
• Stud/Lug Hole Quantity: 6
• Mounting Bolt Hole Quantity: 6
• Nominal Thickness: 28.0mm

Notes: Rotor only, *Higher Carbon Content for maximum heat dissipation, quieter braking and longer life *Z-Clad coating for superior rust protection and enhanced appearance *308 mm rotor *Replace in pairs for best performance

• PRICE: 111.99
• Location:: Rear
• Overall Height: 62.6mm
• Discard Thickness: 16.0mm
• Solid Or Vented Type Rotor: Vented
• Material: Iron Alloy
• Center Hole Diameter: 68.0mm
• Mounting Bolt Hole Circle Diameter: 114.3mm
• Directional or Non-Directional Brake Surface: Non-Directional
• Rust Resistant Coating: No
• Inside Diameter: 190.0mm
• Slotted: No
• ABS Tone Ring Included: No
• Surface Type: Smooth
• Outside Diameter: 308.0mm
• Stud/Lug Hole Quantity: 6
• Nominal Thickness: 18.0mm