2014 Nissan/Datsun Sentra Brake Rotor

Notes: Rotor only, *With 279.7 mm Rotors. *Coated on hat and edge for rust prevention. *Replace in pairs for best performance

• PRICE: 68.99
• Location:: Front

Notes: Rotor only, *USA region. With 292 mm rotor. *Replace in pairs for best performance

• PRICE: 72.99
• Location:: Rear
• Discard Thickness: 8.0mm
• ABS Tone Ring Included: No
• Overall Height: 61.9mm
• Nominal Thickness: 9.0mm
• Inside Diameter: 172.0mm
• Solid Or Vented Type Rotor: Solid
• Surface Type: Smooth
• Center Hole Diameter: 3.0in
• Stud/Lug Hole Quantity: 5
• Outside Diameter: 291.6mm
• Mounting Bolt Hole Circle Diameter: 114.3mm
• Mounting Bolt Hole Quantity: 5
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Rotor only, *Higher Carbon Content for maximum heat dissipation, quieter braking and longer life *Z-Clad coating for superior rust protection and enhanced appearance *279.7mm rotor. *Replace in pairs for best performance

• PRICE: 79.49
• Location:: Front
• Outside Diameter: 279.7mm
• ABS Tone Ring Included: No
• Center Hole Diameter: 68.0mm
• Material: Iron Alloy
• Height: 44mm
• Overall Height: 44.0mm
• Solid Or Vented Type Rotor: Vented
• Discard Thickness: 22.0mm
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Mounting Bolt Hole Circle Diameter: 114.3mm
• Nominal Thickness: 24.0mm
• Slotted: No
• Rust Resistant Coating: Yes
• Inside Diameter: 144.0mm
• Mounting Bolt Hole Quantity: 5
• Directional or Non-Directional Brake Surface: Non-Directional

Notes: Rotor only, *Higher Carbon Content for maximum heat dissipation, quieter braking and longer life *Z-Clad coating for superior rust protection and enhanced appearance *Replace in pairs for best performance

• PRICE: 83.99
• Location:: Rear
• Discard Thickness: 8.0mm
• ABS Tone Ring Included: No
• Center Hole Diameter: 68.0mm
• Overall Height: 62.0mm
• Solid Or Vented Type Rotor: Solid
• Surface Type: Smooth
• Stud/Lug Hole Quantity: 5
• Mounting Bolt Hole Circle Diameter: 114.3mm
• Outside Diameter: 291.6mm

Notes: UV Coated.

• PRICE: 57.99
• Location:: Rear
• ABS Tone Ring Included: No
• Center Hole Diameter: 68.0mm
• Nominal Thickness: 90.0mm
• Material: Grey Cast Iron
• Overall Height: 620.0mm
• Solid Or Vented Type Rotor: solid
• Discard Thickness: 8mm
• Outside Diameter: 291.5mm
• Stud/Lug Hole Quantity: 5
• Rust Resistant Coating: Yes
• Mounting Bolt Hole Circle Diameter: 68.0mm