2017 Nissan/Datsun Sentra Brake Rotor

Notes: Rotor only, *With 279.7 mm Rotors. *Coated on hat and edge for rust prevention. *Replace in pairs for best performance

• PRICE: 67.99
• Location:: Front
• Overall Height: 1.728in
• Mounting Bolt Hole Circle Diameter: 4.5in
• Discard Thickness: 0.866in
• Directional or Non-Directional Brake Surface: Non-Directional
• Solid Or Vented Type Rotor: Vented
• Slotted: No
• ABS Tone Ring Included: No
• Material: Iron Alloy
• Surface Type: Smooth
• Outside Diameter: 11.008in
• Stud/Lug Hole Quantity: 5
• Center Hole Diameter: 2.677in

Notes: Rotor only, *Replace in pairs for best performance

• PRICE: 83.99
• Location:: Front
• Overall Height: 44.0mm
• Discard Thickness: 24.0mm
• Solid Or Vented Type Rotor: Vented
• Material: Iron Alloy
• Center Hole Diameter: 68.1mm
• Mounting Bolt Hole Circle Diameter: 114.3mm
• Directional or Non-Directional Brake Surface: Non-Directional
• Rust Resistant Coating: No
• Inside Diameter: 146.0mm
• Slotted: No
• ABS Tone Ring Included: No
• Surface Type: Smooth
• Outside Diameter: 295.5mm
• Stud/Lug Hole Quantity: 5
• Mounting Bolt Hole Quantity: 5
• Nominal Thickness: 26.0mm

Notes: Rotor only, *With 292 mm rotor. *Replace in pairs for best performance

• PRICE: 71.99
• Location:: Rear
• Overall Height: 61.9mm
• Discard Thickness: 8mm
• Solid Or Vented Type Rotor: Solid
• Center Hole Diameter: 3in
• Mounting Bolt Hole Circle Diameter: 114.3mm
• Directional or Non-Directional Brake Surface: Non-Directional
• Inside Diameter: 172mm
• ABS Tone Ring Included: No
• Surface Type: Smooth
• Outside Diameter: 291.6mm
• Stud/Lug Hole Quantity: 5
• Mounting Bolt Hole Quantity: 5
• Nominal Thickness: 9mm

Notes: Rotor only, *Higher carbon content for maximum heat dissipation, quieter braking and longer life. *Z-Clad coating for superior rust protection and enhanced appearance. *Replace in pairs for best performance

• PRICE: 101.99
• Location:: Front
• Overall Height: 44mm
• Mounting Bolt Hole Circle Diameter: 114mm
• Discard Thickness: 24.0mm
• Rust Resistant Coating: Yes
• Solid Or Vented Type Rotor: Vented
• Slotted: No
• ABS Tone Ring Included: No
• Material: Iron Alloy
• Outside Diameter: 295.5mm
• Mounting Bolt Hole Quantity: 5
• Nominal Thickness: 26mm
• Center Hole Diameter: 68mm

Notes: Rotor only, *Higher Carbon Content for maximum heat dissipation, quieter braking and longer life *Z-Clad coating for superior rust protection and enhanced appearance *279.7mm rotor. *Replace in pairs for best performance

• PRICE: 81.99
• Location:: Front
• Overall Height: 44.0mm
• Discard Thickness: 22.0mm
• Solid Or Vented Type Rotor: Vented
• Material: Iron Alloy
• Center Hole Diameter: 68.0mm
• Mounting Bolt Hole Circle Diameter: 114.3mm
• Directional or Non-Directional Brake Surface: Non-Directional
• Rust Resistant Coating: Yes
• Slotted: No
• Inside Diameter: 144.0mm
• ABS Tone Ring Included: No
• Height: 44mm
• Surface Type: Smooth
• Outside Diameter: 279.7mm
• Stud/Lug Hole Quantity: 5
• Mounting Bolt Hole Quantity: 5
• Nominal Thickness: 24.0mm

Notes: Rotor only, *Higher carbon content for maximum heat dissipation, quieter braking and longer life *Z-Clad coating for superior rust protection and enhanced appearance *With 292 mm rotor *Replace in pairs for best performance

• PRICE: 86.49
• Location:: Rear
• Overall Height: 61.9mm
• Discard Thickness: 8.0mm
• Solid Or Vented Type Rotor: Solid
• Nominal Drum Diameter: 172.1mm
• Material: Iron Alloy
• Center Hole Diameter: 68.0mm
• Mounting Bolt Hole Circle Diameter: 114.3mm
• Directional or Non-Directional Brake Surface: Non-Directional
• Rust Resistant Coating: No
• Inside Diameter: 172.1mm
• Slotted: No
• Bolt Hole Quantity: 5
• ABS Tone Ring Included: No
• Height: 61.9mm
• Surface Type: Smooth
• Outside Diameter: 292.0mm
• Stud/Lug Hole Quantity: 5
• Mounting Bolt Hole Quantity: 5
• Nominal Thickness: 9.0mm

Notes: Rotor only, *Ideal for towing, heavy hauling and frequent stopping. *With 292 mm rotor. *Replace in pairs for best performance

• PRICE: 96.49
• Location:: Rear
• Overall Height: 61.9mm
• Discard Thickness: 8.0mm
• Solid Or Vented Type Rotor: Solid
• Nominal Drum Diameter: 172.0mm
• Material: Iron Alloy
• Center Hole Diameter: 68.0mm
• Mounting Bolt Hole Circle Diameter: 114.3mm
• Directional or Non-Directional Brake Surface: Non-Directional
• Rust Resistant Coating: No
• Inside Diameter: 172.1mm
• ABS Tone Ring Included: No
• Surface Type: Smooth
• Outside Diameter: 292.0mm
• Stud/Lug Hole Quantity: 5
• Mounting Bolt Hole Quantity: 5
• Nominal Thickness: 9.0mm