2011 Peterbilt 384 Brake Rotor

Buy Online. Pick Up In-Store.

What are you working on today?

Get an exact fit for your 2011 Peterbilt 384
Don't forget your Brake Pads! Save 15% on the complete brake job with Duralast®

1-2 of 2 Results

1-2 of 2 Results
      • Sponsored

        Duralast Severe Duty Brake Rotor 94002SD

        Sponsored
        Duralast Severe Duty Brake Rotor 94002SD for 2011 Peterbilt 384

        Duralast Severe Duty Brake Rotor 94002SD

        • Part # 94002SD
        • SKU # 1267082

        • Location: Rear

        Notes: Rotor only, *Ideal for towing, heavy hauling and frequent stopping *150mm tall. U shaped disc. Bendix ADB22X *Replace in pairs for best performance

        • PRICE: 551.99
        • Location:: Rear
        • Overall Height: 150.1mm
        • Discard Thickness: 37.0mm
        • Solid Or Vented Type Rotor: Vented
        • Material: Iron Alloy
        • Center Hole Diameter: 220.0mm
        • Mounting Bolt Hole Circle Diameter: 249.8mm
        • Directional or Non-Directional Brake Surface: Non-Directional
        • Rust Resistant Coating: No
        • Inside Diameter: 207.7mm
        • ABS Tone Ring Included: No
        • Surface Type: Smooth
        • Outside Diameter: 429.7mm
        • Mounting Bolt Hole Quantity: 10
        • Stud/Lug Hole Quantity: 10
        • Nominal Thickness: 45.1mm

      • Sponsored

        Duralast Severe Duty Brake Rotor 94001SD

        Sponsored
        Duralast Severe Duty Brake Rotor 94001SD for 2011 Peterbilt 384

        Duralast Severe Duty Brake Rotor 94001SD

        • Part # 94001SD
        • SKU # 1267084

        • Location: Rear

        Notes: Rotor only, *Ideal for towing, heavy hauling and frequent stopping *U shaped disc. Bendix ADB22X. 138mm Tall *Replace in pairs for best performance

        • PRICE: 531.99
        • Location:: Rear
        • Overall Height: 138.5mm
        • Discard Thickness: 37.0mm
        • Solid Or Vented Type Rotor: Vented
        • Material: Iron Alloy
        • Center Hole Diameter: 220.0mm
        • Mounting Bolt Hole Circle Diameter: 250.0mm
        • Directional or Non-Directional Brake Surface: Non-Directional
        • Rust Resistant Coating: No
        • Inside Diameter: 207.0mm
        • ABS Tone Ring Included: No
        • Surface Type: Smooth
        • Outside Diameter: 429.6mm
        • Mounting Bolt Hole Quantity: 10
        • Stud/Lug Hole Quantity: 10
        • Nominal Thickness: 45.0mm

      Alternate Year Models

      2010 Peterbilt 384 Brake Rotor2012 Peterbilt 384 Brake Rotor