Power Stop Performance Brake Rotors AR84103XPR
Pinch with 2 fingers to zoom

Power Stop Performance Brake Rotors AR84103XPR

Power Stop1112133
Part # AR84103XPR
SKU # 1112133

Price Not Available

PRODUCT SPECIFICATIONS

Part #AR84103XPR
SKU #1112133
Weight58lbs
Application

1.- Front

Discard Thickness28.0mm
Rust Resistant CoatingY
Solid Or Vented Type RotorVented
Bolt Hole Quantity6
Height2.3in
Surface TypeSlotted X Drilled
Outside Diameter13.5in
Nominal Thickness30.2mm
Part #
AR84103XPR
SKU #
1112133
Weight
58lbs
Application

1.- Front

Discard Thickness
28.0mm
Rust Resistant Coating
Y
Solid Or Vented Type Rotor
Vented
Bolt Hole Quantity
6
Height
2.3in
Surface Type
Slotted X Drilled

PRODUCT DESCRIPTION

Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.

  • checkmark
    Precision cross-drilled for maximum cooling and optimum performance
  • checkmark
    Chamfered drill holes and rounded slots to minimize stress cracking
  • checkmark
    Manufactured to strict tolerances for DTV and runout for smooth quiet performance
  • checkmark
    100% dynamic mill balanced
  • checkmark
    Bolt-on upgrade for stock brakes, no modifications necessary
  • checkmark
    Slotted friction surface sweeps away gasses, dust, and water
  • checkmark
    Zinc plated for protection against corrosion (except hub rotors w/ integral wheel bearings)
  • checkmark
    Weight and vane count match original equipment design
  • checkmark
    Sold as a pair

Power Stop drilled and slotted rotors provide a bolt-on upgrade for improved brake cooling and performance. Precision cross-drilled for maximum cooling and maximum performance during extreme conditions; rounded slots sweep away gasses, dust, and moisture to keep a clean friction contact patch on the rotor surface. Silver zinc dichromate plating resists rust and corrosion. With a direct OE fit, there are no special modifications needed.

  • checkmark
    Precision cross-drilled for maximum cooling and optimum performance
  • checkmark
    Chamfered drill holes and rounded slots to minimize stress cracking
  • checkmark
    Manufactured to strict tolerances for DTV and runout for smooth quiet performance
  • checkmark
    100% dynamic mill balanced
  • checkmark
    Bolt-on upgrade for stock brakes, no modifications necessary
  • checkmark
    Slotted friction surface sweeps away gasses, dust, and water
  • checkmark
    Zinc plated for protection against corrosion (except hub rotors w/ integral wheel bearings)
  • checkmark
    Weight and vane count match original equipment design
  • checkmark
    Sold as a pair