MSD Performance Distributor Drive Gear 8005
  • Thumbnail  MSD Performance Distributor Drive Gear 8005
Pinch with 2 fingers to zoom

MSD Performance Distributor Drive Gear 8005

MSD203826
Part # 8005
SKU # 203826

Price Not Available

PRODUCT SPECIFICATIONS

Part #8005
SKU #203826
Weight0.3lbs
Coating TypeMelonite QPQ Coating
Drilling RequiredNo
Part #
8005
SKU #
203826
Weight
0.3lbs
Coating Type
Melonite QPQ Coating
Drilling Required
No

PRODUCT DESCRIPTION

Please note: MSD gears will only work with MSD distributor parts. This gear test fixture features variable RPM and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 RPM (crankshaft). Equipment and quality procedures like this are a big advantage to our customers and MSD. These two gears were run at 7,200 RPM with an oil pressure of 85 psi. The MSD gear on the left ran for 12 hours and shows only a slight chaffing on the teeth. The other gear lasted only four minutes and is destroyed.

  • checkmark
    Increased outer hardened layer thickness (RC 55-60)
  • checkmark
    Micro polished surface for smooth contact
  • checkmark
    Proprietary formulated ductile iron
  • checkmark
    Melonite QPQ coated reduces friction and initial wear
  • checkmark
    Interstitial carbide concentration improves wear resistance and running properties

Please note: MSD gears will only work with MSD distributor parts. This gear test fixture features variable RPM and oil pressure control allowing MSD engineers the ability to maintain the exact conditions that they want for gear tests. Severe loads can be placed on the gear and the fixture can spin up to 10,000 RPM (crankshaft). Equipment and quality procedures like this are a big advantage to our customers and MSD. These two gears were run at 7,200 RPM with an oil pressure of 85 psi. The MSD gear on the left ran for 12 hours and shows only a slight chaffing on the teeth. The other gear lasted only four minutes and is destroyed.

  • checkmark
    Increased outer hardened layer thickness (RC 55-60)
  • checkmark
    Micro polished surface for smooth contact
  • checkmark
    Proprietary formulated ductile iron
  • checkmark
    Melonite QPQ coated reduces friction and initial wear
  • checkmark
    Interstitial carbide concentration improves wear resistance and running properties