Jeep Wrangler JK Lift Support

Buy Online. Pick Up In-Store.

SET YOUR VEHICLE
Get an exact fit for your Jeep Wrangler JK

1-1 of 1 Results

Sort by
1-1 of 1 Results

Customer

Reviews

Reviews for


I didn't know that this product was available

Patrick

in a year

The fit is good, the price is a little higher but the convenience was almost worth it.

What kind of vehicle do you drive? 2009 Jeep wrangler jk

The fit is good, the price is a little higher but the convenience was almost worth it.

What kind of vehicle do you drive? 2009 Jeep wrangler jk

Reviews for


It technically fits...

Ron Ron

in 4 months

My driver's side rear window lift support had been slightly bent for years and finally gave up the ghost this winter with a release of its compressed gas. I was looking for a replacement, and this was the only one in stock that was said to fit. The other one looked more like the stock lift support, while this one appeared thinner and longer from pictures. While this *works*, you will have to compress it quite a bit to attach both ends to the respective ball joints. I could not lift the rear window high enough without worrying about cracking the hinge covers to attach it fully extended. To do it myself, I attached one end to the window and compressed the lift between the window and my hand just enough to slip it onto the body side ball joint. I think it would be a lot easier with two people and maybe popping the part in the freezer for a bit to reduce the pressure of the gas. That being said, the window lifts fine now with the new part on one side and the stock one on the other. I took off a star because of the imperfect fit and extra effort that would not have been required with a part that was closer to stock spec.

What kind of vehicle do you drive? 2011 Jeep Wrangler JKU Sahara

My driver's side rear window lift support had been slightly bent for years and finally gave up the ghost this winter with a release of its compressed gas. I was looking for a replacement, and this was the only one in stock that was said to fit. The other one looked more like the stock lift support, while this one appeared thinner and longer from pictures. While this *works*, you will have to compress it quite a bit to attach both ends to the respective ball joints. I could not lift the rear window high enough without worrying about cracking the hinge covers to attach it fully extended. To do it myself, I attached one end to the window and compressed the lift between the window and my hand just enough to slip it onto the body side ball joint. I think it would be a lot easier with two people and maybe popping the part in the freezer for a bit to reduce the pressure of the gas. That being said, the window lifts fine now with the new part on one side and the stock one on the other. I took off a star because of the imperfect fit and extra effort that would not have been required with a part that was closer to stock spec.

What kind of vehicle do you drive? 2011 Jeep Wrangler JKU Sahara