This forum post is hidden because you have chosen to ignore Member 991681007. Show Details
This forum post is hidden because you have submitted an abuse report against it. Show Details
I recently was gifted a 1998 tiburon and the master control switch for the window was pulled out of the door... i ordered a switch, however when I went to plug the multi pin harness into the switch I noticed half the wires were out of the harness. can anybody help guide me how to correctly wire the harness so i can plug it into the switch and get my windows down? thank you in advance. and yes the part works because the power side mirrors turn (that harness was untouched) and its not the window motor because i stripped a wire and got the passenger window to go down.