Why Does Oil Prolong the Life of Car Parts?
If you are new to cars, don't worry, we all started somewhere. One of the most important things to understand about your car is how it operates and what the fluids inside the car do. Even if you are not a gearhead by nature, it's important to understand how your car operates and what you need to do to maintain it.
One of the most important fluids that a car needs is oil. Even if you know nothing about cars, it's probable that you understand your car needs to have oil changes every so often. However, you may not understand why oil is such an important component for a well-functioning machine. If you have ever wondered “why does oil prolong the life of car parts?”, you are not alone. And we are here to help answer your questions.
What Does Motor Oil Actually Do?
To understand the function of motor oil, it’s first important to at least get a basic understanding of how your engine works. You don’t need to get too technical to really understand what oil does: rather, the most important thing to understand is that there are many moving parts inside your engine. These moving parts not only rub against each other, they also produce a great amount of heat.
Essentially, motor oil acts as the lubricant that allows all of these moving parts inside your engine to rub against each other and not overheat or dull over time. If you were to try and drive your car with no motor oil inside of it, eventually that heat and friction would cause the engine to weld itself into a useless piece of metal. When this happens to a car engine, it is called “locking up.” Once an engine is locked up, there’s basically nothing that can be done to fix it. Other than, of course, replacing the entire engine.
Obviously, most motorists want to avoid this, and thus ensure that their car has sufficient motor oil to coat and protect its moving parts against excessive wear.
In addition to the heat generated from all of the moving components of the engine rubbing against each other, engines run off of a process called internal combustion. This process of combustion produces a lot of water vapor, carbon, acids, and several other byproducts.
Way back in the day, engines actually didn’t have an oil pump to help move the oil around the engine. Rather, they used a very rudimentary system of dippers on the crankshaft which would then splash oil upward and cover the moving parts of the engine with oil. (In the modern day, many lawn mowers still operate this way.)
However, this process is obviously imperfect, and usually would result in a locked up engine after a period of time. Over time the process of oil delivery did improve, but it also took a while for oil filters to start showing up on automobiles. What a filter does is help remove unwanted particles from the oil, such as carbon. Prior to the addition of oil filters, older engines would need to go through a process known as “de-coking” in order to remove the build-up.
‘”De-coking” would involve running a mixture of diluted kerosene and oil through the engine and hope that it would help remove some of the carbon buildup. However, this was also not a very precise process and many times it would end up damaging the engine. Thus, prior to modern oils that involve detergents and oil filters, generally engines would have to be completely replaced after around 80,000 miles.
Basically, your car’s engine is a very complex place, and, due to the movement and heat generated by the process of combustion, a very dirty place. Not only does oil lubricate the parts inside of your engine to ensure overheating does not occur, it also helps to keep the engine clean.
Does Switching Between Conventional and Synthetic Oils Cause Problems?
Originally, all motor oils were mineral-based. Of course, after years of development synthetic blend oil started to appear on the market. For a while, it was “conventional wisdom” that switching to a synthetic oil after using mineral-based oils in an engine would result in problems like burning oil or potential leakage.
While this was a problem at one point, with modern synthetic oils this is no longer a concern. (This is similar to how some people swear up and down that manual cars get better gas mileage as compared to automatic cars. It used to be true, but it’s not so much anymore.) In fact, synthetic motor oil is actually better than conventional oil in many ways.
First of all, synthetic oil has a higher percentage of purity as compared to conventional oils. Conventional oils are going to have a certain amount of impurities by its very nature: for example, paraffin molecules. On the other hand, synthetic oil is pure all the way through. This means that you can go much farther between oil changes with synthetic compared to conventional oil.
Additionally, synthetic oil is going to retain the same viscosity no matter what the temperature is outside. Again, by the nature of conventional oil, it thins out at high temperatures, and increases in viscosity when it’s cold outside. This can make it difficult for the oil to do its job of lubricating and protecting the components of your engine properly.
Particularly if your car is a more modern model, it’s important to go with synthetic oil. This is because synthetic oil has much greater shear strength as compared to conventional oil. Basically, if there is enough pressure, the very molecules of conventional oil can be torn apart. This doesn’t happen with synthetic oil, and given the very tight tolerances of modern engine build, this strength factor is paramount for peak engine performance and protection.
No matter what kind of vehicle you own, it’s very important for the engine to have an appropriate amount and variety of motor oil. Failure to have enough can result in engine lockage, meaning that you’ll have a very expensive mess on your hands. Make sure to change your oil and oil filter regularly for top performance.
Advice, how-to guides, and car care information featured on AutoZone.com and AutoZone Advice & How-To’s are presented as helpful resources for general maintenance and automotive repairs from a general perspective only and should be used at your own risk. Information is accurate and true to the best of AutoZone’s knowledge, however, there may be omissions, errors or mistakes.
Be sure to consult your owner’s manual, a repair guide, an AutoZoner at a store near you, or a licensed, professional mechanic for vehicle-specific repair information. Refer to the service manual for specific diagnostic, repair and tool information for your particular vehicle. Always chock your wheels prior to lifting a vehicle. Always disconnect the negative battery cable before servicing an electrical application on the vehicle to protect its electrical circuits in the event that a wire is accidentally pierced or grounded. Use caution when working with automotive batteries. Sulfuric acid is caustic and can burn clothing and skin or cause blindness. Always wear gloves and safety glasses and other personal protection equipment, and work in a well-ventilated area. Should electrolyte get on your body or clothing, neutralize it immediately with a solution of baking soda and water. Do not wear ties or loose clothing when working on your vehicle.
FREE Loan-A-Tool® program requires returnable deposit. Please note that the tool that you receive after placing an online order may be in a used but operable condition due to the nature of the Loan-A-Tool® program.