Eliminate the hassle of extra tools and dangerous components by upgrading to Duralast Loaded Struts for an easier install and a smoother ride. Installing Duralast Loaded Struts is safer than traditional strut replacement and can be done at home with hand tools.

Why pick loaded struts?

No More Spring Compression

Loaded strut installation eliminates the dangerous step of compressing an energy-loaded spring and takes less time than traditional strut replacement by allowing you to install all-new parts. With a Duralast Loaded Strut, you’ll never have to compress a spring. Duralast Loaded Struts come with a new spring installed and compressed specifically to maintain OE ride height.

New Assembly

All the parts in the Duralast Loaded strut are new.

  • Coil Spring
  • Strut Mount
  • Premium Oil
  • N.O.K. Seals
  • Rubber Dust Boot
  • Bearings and Studs
  • Hard chrome piston rod
  • Noise-absorbing jounce bumper
  • Corrosion-resistant electrostatic coating

Installing a Duralast Loaded Strut means a totally new assembly goes on your vehicle. This helps lower the chance of future failures, helps to restore like-new ride control, and helps to improve braking performance.

If you’re experiencing a bumpy ride, having trouble controlling your vehicle or notice oil leaking from your struts, think about installing Duralast Loaded Struts, and stop by your local AutoZone.

Advice, how-to guides, and car care information featured on and AutoZone Advice & How-To’s are presented as helpful resources for general maintenance and automotive repairs from a general perspective only and should be used at your own risk. Information is accurate and true to the best of AutoZone’s knowledge, however, there may be omissions, errors or mistakes.

Be sure to consult your owner’s manual, a repair guide, an AutoZoner at a store near you, or a licensed, professional mechanic for vehicle-specific repair information. Refer to the service manual for specific diagnostic, repair and tool information for your particular vehicle. Always chock your wheels prior to lifting a vehicle. Always disconnect the negative battery cable before servicing an electrical application on the vehicle to protect its electrical circuits in the event that a wire is accidentally pierced or grounded. Use caution when working with automotive batteries. Sulfuric acid is caustic and can burn clothing and skin or cause blindness. Always wear gloves and safety glasses and other personal protection equipment, and work in a well-ventilated area. Should electrolyte get on your body or clothing, neutralize it immediately with a solution of baking soda and water. Do not wear ties or loose clothing when working on your vehicle.

FREE Loan-A-Tool® program requires returnable deposit. Please note that the tool that you receive after placing an online order may be in a used but operable condition due to the nature of the Loan-A-Tool® program.

Related Posts