6 tips for getting a better car wash
With just a little, consistent effort, you can keep your car’s finish well-protected and looking great.
Washing regularly, cleaning the wheels, taking care of obvious gunk, dead bugs and tree sap quickly, and applying wax every two to three months will keep your car looking fantastic under a variety of circumstances.
6 ways to get a better wash
Wash on a regular schedule
Some detailers recommend every week, but every other week is probably fine as long as you immediately address obvious issues like dead bugs, bird droppings, or major dirt buildup.
Set up in a good area
Set up to wash the car in a shady area, direct sunlight can cause spotting. We recommend using a dedicated car-wash soap and a microfiber wash sponge. A car wash soap is detergent free. Detergents will cause your wax to have a spider-web finish and create a haze. Wash sponge are great because they hold a lot of soapy water, grab lots of dirt and grime, and won't leave micro-scratches on your paint. It's also a good idea to use two buckets. One for clean soapy water, and one with rinsing water to remove dirt from the sponge. If this is not an option, just spray the sponge off between rinsing. It's never good to wash the whole car and then rinse. The sun and heat can cause soap to dry, making you re-wash.
Work from the wheels up
It might sound counter-intuitive, but you want to start low. Start with the wheels and lower body to clean the dirtiest parts of the car first. Lots of people like to start rubbing down the hood, but the wheels are always the dirtiest part of your car, and you want to get that dirt off before moving on to the paint. Washing the wheels first will also save you time from drying paint twice. Always wait until the wheels have cooled before cleaning them.
Take the time to dry the vehicle
You don't want soap and dirt residue to hold on the paint after you've put in all this hard work. And you'll need a clean, dry surface if you're also waxing. It's a good idea to use a terrycloth or microfiber towel, clean and lint free, for the best drying.
Wax in sections, in the shade
You don't want the wax to dry before you've had a chance to buff, so pick a dedicated section, apply the wax, and buff before moving on. Spray waxes offer an easy way to wax your vehicle in sections. Simply spray while the vehicle is wet, and then use a microfiber cloth to rub the wax onto the surface. If you notice spider-webbing and haze you'll need to use a cleaner wax. You could also use a nonabrasive cleaning compound to remove the old wax before using a polish. Removing old wax and applying new wax should be done at least once a year.
Finish with the glass
It's a good practice to clean your interior with appropriate materials as well, shampoo for cloth seats and dedicated leather cleaner for leather seats, but save your glass and windows for last to make sure you catch and residual cleaner from the other applications.