1999 Chevrolet S10 Catalytic Converter

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. 2.5". rear. CARB Executive Order D-193-103. Engine Family Number XGMXT04.3184. Certification Level: TLEV. Engine Family Number XGMXT04.3185. Certification Level: LEV1 LEV. OE Spec. Cutting and welding required during installation. This product is in compliance with California regulations.

• PRICE: 521.99
• Location:: CARB
• Body Width: 5.5
• Universal Or Specific Fit: Universal
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.5
• Body Material: Stainless Steel
• Inlet Inside Diameter: 2.5
• Body Length: 9.0
• Overall Length: 9.0
• Grade Type: Premium Replacement

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. Sub model Base. MEX region. XGMXT02.2122. Cutting and welding required during installation. OEM spec. Certification level : transitional low emission vehicle. 2.25" universal California OBDII catalytic converter. CARB executive order D-193-119. Legal for use in the state of California, New York and Maine.

• PRICE: 584.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 11in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Overall Length: 15in
• Body Width: 4.25in
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.25in
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.25in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4.375in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Premium Replacement

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. Sub model Base. MEX region. XGMXT02.2122. Cutting and welding required during installation. OEM spec. Certification level : transitional low emission vehicle. 2.25" universal California OBDII catalytic converter. CARB executive order D-193-113. Legal for use in the state of California, New York and Maine.

• PRICE: 827.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 12in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Oval
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Mounting Hardware Included: No
• Overall Length: 16in
• Body Width: 6.375in
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.25in
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.25in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 3.75in
• Outlet Type: Weld-On
• Outlet Orientation: Straight

Application: OE Direct Fit - Factory mounting style

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. Sub model Base. MEX region. XGMXT02.2122. Direct-fit California OBDII converters. Certification level : transitional low emission vehicle. CARB executive order D-193-139. Legal for use in the state of California, New York and Maine.

• PRICE: 1438.99
• Location:: CARB
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Post Converter
• Inlet Gasket Included: Yes
• Mounting Hardware Included: Yes
• Overall Length: 27.25in
• Hangers Included: Yes
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 1
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Outlet Gasket Included: No
• Clamps Included: No
• Outlet Type: Bolt-On
• Finish: Stainless Steel
• Grade Type: Regular
• Heat Shield Material: None

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. 2.5". Front. CARB Executive Order D-193-103. Engine Family Number XGMXT04.3184, XGMXT04.3185. Certification Level: TLEV. OE Spec. Cutting and welding required during installation. This product is in compliance with California regulations.

• PRICE: 586.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 9in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Oval
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Mounting Hardware Included: No
• Overall Length: 13in
• Body Width: 5.5in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.5in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 3.75in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Premium Replacement

Application: OE Direct Fit - Factory mounting style

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII converters rear. CARB Executive Order D-193-103. Engine Family Number XGMXT04.3184. Certification Level: TLEV. Engine Family Number XGMXT04.3185. Certification Level: LEV1 LEV. This product is in compliance with California regulations.

• PRICE: 593.99
• Location:: CARB
• Hangers Included: Yes
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: Yes
• Body Length: 7.5
• Outlet Gasket Included: Yes
• Clamps Included: No
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Post Converter
• Inlet Gasket Included: Yes
• Overall Length: 31in
• Mounting Hardware Included: Yes
• Body Width: 4.0
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.25
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Inside Diameter: 2.0
• Sensor Port Count: 1
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Outlet Type: Bolt-On
• Grade Type: Regular

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Optional universal converter - Sizing may be required. Rear. CARB Executive Order D-280-101. Engine Family #XGMXT04.3184 or #XGMXT04.3185. Certification level: TLEV or LEV1 LEV. 2.5" inner/ 2.5" outer diameter; 16" overall; Round body. Legal for use in the state of California, New York and Maine.

• PRICE: 405.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Optional universal converter - Sizing may be required. Rear. CARB Executive Order D-280-101. Engine Family #XGMXT04.3184. Certification level: TLEV. 2.25" inner/ 2.25" outer diameter; 15.25" overall. Legal for use in the state of California, New York and Maine.

• PRICE: 405.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Optional universal converter - Sizing may be required. Front or rear. CARB Executive Order D-280-101. Engine Family #XGMXT04.3184 or #XGMXT04.3185. Certification level: TLEV or LEV1 LEV. 2.25" inner/ 2.25" outer diameter; 16" overall; Round body. Legal for use in the state of California, New York and Maine.

• PRICE: 405.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Optional universal converter - Sizing may be required. Rear. CARB Executive Order D-280-101. Engine Family #XGMXT04.3184 or #XGMXT04.3185. Certification level: TLEV or LEV1 LEV. 2.25" inner/ 2.25" outer diameter; 16.5" overall. Legal for use in the state of California, New York and Maine.

• PRICE: 475.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Rear. CARB Executive Order D-280-101. Engine Family #XGMXT04.3184 or #XGMXT04.3185. Certification level: TLEV or LEV1 LEV. 2.5" inner/ 2.5" outer diameter; 16.5" overall. Legal for use in the state of California, New York and Maine.

• PRICE: 824.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Optional universal converter - Sizing may be required. Rear. CARB Executive Order D-280-101. Engine Family #XGMXT04.3184 or #XGMXT04.3185. Certification level: TLEV or LEV1 LEV. 2.5" inner/ 2.5" outer diameter; 15.5" overall. Legal for use in the state of California, New York and Maine.

• PRICE: 648.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: HM Grade converter. Cutting and welding required during installation. Not for sale or use in the state of California.

• PRICE: 276.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 12in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Oval
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Overall Length: 16in
• Body Width: 5.5in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.5in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 3.75in
• Outlet Type: Weld-On
• Outlet Orientation: Straight

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine family number) found on emission label on vehicle. Calcat converter. Engine family #XGMXT02.2122. Executive order #D-182-57. Modifications and/or additional parts required. Legal for use in the state of California, New York and Maine.

• PRICE: 825.99
• Location:: CARB
• Body Width: 6.125
• Universal Or Specific Fit: Universal
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.25
• Body Material: Stainless Steel
• Inlet Inside Diameter: 2.25
• Body Length: 13.25
• Overall Length: 13.25
• Grade Type: Standard Replacement

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine family number) found on emission label on vehicle. Calcat converter. Rear. Engine family #XGMXT04.3184, XGMXT04.3185. Executive order #D-182-69. Modifications and/or additional parts required. Legal for use in the state of California, New York and Maine.

• PRICE: 554.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Catalytic Converter. Sub model Base. MEX region. Cutting and welding required during installation. Universal hm grade federal (except California). Not legal for sale in California.

• PRICE: 221.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 9in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Mounting Hardware Included: No
• Overall Length: 13in
• Body Width: 4.375in
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.25in
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.25in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4.375in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Regular

Application: OE Direct Fit - Factory mounting style

Notes: HM Grade Converter. Vehicles with 1 converter. Not for sale or use in the state of California

• PRICE: 618.99
• Location:: Federal
• Hangers Included: Yes
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Body Length: 31.0
• Outlet Gasket Included: Yes
• Clamps Included: No
• Finish: Stainless Steel
• Heat Shield Material: None
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Post Converter
• Inlet Gasket Included: Yes
• Overall Length: 31in
• Mounting Hardware Included: Yes
• Body Width: 7.0
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5
• Body Material: Stainless Steel
• Sensor Port Count: 1
• Inlet Mounting Hardware Included: No
• Inlet Inside Diameter: 2.5
• Outlet Mounting Hardware Included: No
• Outlet Type: Bolt-On
• Grade Type: Regular

Application: Universal - Requires cut and weld

Notes: Catalytic Converter. Sub model Base. MEX region. Cutting and welding required during installation. Universal oem grade federal (exc.ca). Not for sale or use in the state of California.

• PRICE: 241.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 9in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Overall Length: 13in
• Body Width: 4.25in
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.25in
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.25in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4.375in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Premium Replacement

Application: OE Direct Fit - Factory mounting style

Notes: Catalytic Converter. Sub model Base. MEX region. Direct-fit hm grade federal (except California). Not for sale or use in the state of California.

• PRICE: 608.99
• Location:: Federal
• Body Width: 8.0
• Universal Or Specific Fit: Direct OE Replacement
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.25
• Body Material: Stainless Steel
• Inlet Inside Diameter: 2.25
• Body Length: 27.25
• Overall Length: 27.25
• Grade Type: OEM Standard

Application: OE Direct Fit - Factory mounting style

Notes: Catalytic Converter. Sub model Base. MEX region. Direct-fit oem grade federal (exc.ca). Not for sale or use in the state of California.

• PRICE: 759.99
• Location:: Federal
• Hangers Included: Yes
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Body Length: 11.0
• Outlet Gasket Included: Yes
• Clamps Included: No
• Finish: Stainless Steel
• Heat Shield Material: None
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Post Converter
• Inlet Gasket Included: Yes
• Mounting Hardware Included: Yes
• Overall Length: 27.25in
• Body Width: 4.0
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.5
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 1
• Inlet Mounting Hardware Included: No
• Inlet Inside Diameter: 2.5
• Outlet Mounting Hardware Included: No
• Outlet Type: Bolt-On
• Grade Type: Regular

Application: Universal - Requires cut and weld

Notes: Not For Sale or Use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details

• PRICE: 351.99
• Location:: Federal

Application: Universal - Requires cut and weld

Notes: Select + Plus. California Emissions. Not For Sale or Use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details.

• PRICE: 618.99
• Location:: Federal

Application: Universal - Requires cut and weld

Notes: Select + Plus. Not For Sale or Use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details

• PRICE: 775.99
• Location:: Federal

Application: Universal - Requires cut and weld

Notes: California Emissions. Not For Sale or Use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details

• PRICE: 313.99
• Location:: Federal