2001 Chrysler Sebring Catalytic Converter

Buy Online. Pick Up In-Store.

What are you working on today?

Get an exact fit for your 2001 Chrysler Sebring

1-24 of 47 Results

1-24 of 47 Results
  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 457019 for 2001 Chrysler Sebring
    • Part # 457019
    • SKU # 81244
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. CARB Executive Order D-193-124. Engine Family Number 1DSXV02.4GNG. Certification Level: LEV1 LEV. Legal for use in the state of California, New York and Maine.

    • PRICE: 736.99
    • Location:: CARB
    • Hangers Included: No
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Heat Shield Attached: No
    • Body Length: 11.0
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Finish: Stainless Steel
    • Heat Shield Material: None
    • Universal Or Specific Fit: Specific
    • Oxygen Sensor Location: Midbed
    • Inlet Gasket Included: Yes
    • Mounting Hardware Included: Yes
    • Overall Length: 38.625in
    • Body Width: 5.13
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 2.5
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Inlet Inside Diameter: 2.5
    • Outlet Mounting Hardware Included: No
    • Outlet Type: Clamp-On
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Universal Catalytic Converter 2.25in 441005 for 2001 Chrysler Sebring
    • Part # 441005
    • SKU # 220828
    • Location: CARB

    Application: Universal - Requires cut and weld

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. 2.25". Rear. CARB Executive Order D-193-96. Engine Family Number 1DSXV03.0GNG. Certification Level: LEV1 LEV. OE Spec. Cutting and welding required during installation. This product is in compliance with California regulations.

    • PRICE: 671.99
    • Location:: CARB
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: Yes
    • Body Length: 9in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: Aluminized Steel
    • Universal Or Specific Fit: Universal
    • Body Shape: Oval
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Overall Length: 13in
    • Body Width: 5.5in
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 2.25in
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Inside Diameter: 2.25in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 3.75in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 82591MGF for 2001 Chrysler Sebring
    • Part # 82591MGF
    • SKU # 773611
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. Rear. CARB Executive Order D-193-124. Engine Family Number 1CRXV03.5VD0. Certification Level: LEV1 LEV. Legal for use in the state of California, New York and Maine.

    • PRICE: 975.99
    • Location:: CARB
    • Hangers Included: No
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Heat Shield Attached: No
    • Body Length: 8.3
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Finish: Stainless Steel
    • Heat Shield Material: None
    • Universal Or Specific Fit: Specific
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Mounting Hardware Included: Yes
    • Overall Length: 8.25in
    • Body Width: 8.3
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 4.0
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Mounting Hardware Included: No
    • Inlet Inside Diameter: 4.0
    • Outlet Mounting Hardware Included: Yes
    • Outlet Type: Bolt-On
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 452214 for 2001 Chrysler Sebring
    • Part # 452214
    • SKU # 773610
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. Front. CARB Executive Order D-193-124. Engine Family Number 1CRXV03.5VD0. Certification Level: LEV1 LEV. Legal for use in the state of California, New York and Maine.

    • PRICE: 998.99
    • Location:: CARB
    • Universal Or Specific Fit: Specific
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Overall Length: 12.75in
    • Hangers Included: No
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Body Width: 5.0
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Outlet Inside Diameter: 2.5
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Mounting Hardware Included: Yes
    • Inlet Inside Diameter: 2.5
    • Outlet Mounting Hardware Included: No
    • Body Length: 6.25
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Outlet Type: Bolt-On
    • Finish: Stainless Steel
    • Grade Type: Regular
    • Heat Shield Material: None

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Universal Catalytic Converter 2in 444104 for 2001 Chrysler Sebring
    • Part # 444104
    • SKU # 979814
    • Location: CARB

    Application: Universal - Requires cut and weld

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. 2". Front left, front right. CARB Executive Order D-193-96. Engine Family Number 1DSXV03.0GNS. Certification Level: LEV1 LEV. OE Spec. Cutting and welding required during installation. This product is in compliance with California regulations.

    • PRICE: 436.99
    • Location:: CARB
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: Yes
    • Body Length: 9in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: Aluminized Steel
    • Universal Or Specific Fit: Universal
    • Body Shape: Oval
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Overall Length: 13in
    • Body Width: 5.5in
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Outlet Inside Diameter: 2in
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Inside Diameter: 2in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 3.75in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight
    • Grade Type: Premium Replacement

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Manifold Catalytic Converter 452027 for 2001 Chrysler Sebring
    • Part # 452027
    • SKU # 754779
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Manifold converter, Verify EFN (Engine Family Number) found on emission label on vehicle. Exhaust manifold with integrated catalytic converter. Front. CARB Executive Order D-193-124. Engine Family Number 1DSXV02.4GNG. Certification Level: LEV1 LEV. Legal for use in the state of California, New York and Maine.

    • PRICE: 959.99
    • Location:: CARB
    • Inlet Gasket Included: Yes
    • Converter Body Material: Stainless Steel
    • Overall Length: 17.5in
    • Converter Body Length: 7.75in
    • Inlet Type: Flanged
    • CARB Executive Order Number: Yes
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Type: One-Piece
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: Yes
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Flanged
    • Finish: Stainless Steel
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Universal Catalytic Converter 2in 448304 for 2001 Chrysler Sebring
    • Part # 448304
    • SKU # 1114614
    • Location: CARB

    Application: Universal - Requires cut and weld

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. CARB Executive Order D-193-113. Engine Family Number 1CRXV02.4VD0. Certification Level: LEV1 LEV. OE Spec. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

    • PRICE: 827.99
    • Location:: CARB
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: Yes
    • Body Length: 12in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: Aluminized Steel
    • Universal Or Specific Fit: Universal
    • Body Shape: Oval
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Overall Length: 16in
    • Body Width: 6.375in
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Outlet Inside Diameter: 2in
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Inside Diameter: 2.25in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 3.75in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Universal Catalytic Converter 2.25in 441305 for 2001 Chrysler Sebring
    • Part # 441305
    • SKU # 979811
    • Location: CARB

    Application: Universal - Requires cut and weld

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. 2.25". Rear right. CARB Executive Order D-193-96. Engine Family Number 1DSXV03.0GNS. Certification Level: LEV1 LEV. OE Spec. Cutting and welding required during installation. This product is in compliance with California regulations.

    • PRICE: 671.99
    • Location:: CARB
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: Yes
    • Body Length: 9in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: Aluminized Steel
    • Universal Or Specific Fit: Universal
    • Body Shape: Oval
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Overall Length: 13in
    • Body Width: 5.5in
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 2.25in
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Inside Diameter: 2.25in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 3.75in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight
    • Grade Type: Premium Replacement

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Universal Catalytic Converter 2.5in 457056 for 2001 Chrysler Sebring
    • Part # 457056
    • SKU # 80530
    • Location: CARB

    Application: Universal - Requires cut and weld

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. 2.50". CARB Executive Order D-193-124. Engine Family Number 1DSXV02.4GNG. Certification Level: LEV1 LEV. OE Spec. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

    • PRICE: 476.99
    • Location:: CARB
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: Yes
    • Body Length: 12in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: Aluminized Steel
    • Universal Or Specific Fit: Universal
    • Body Shape: Oval
    • Oxygen Sensor Location: Midbed
    • Inlet Gasket Included: No
    • Overall Length: 16in
    • Body Width: 5.5in
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Outlet Inside Diameter: 2.5in
    • Body Material: Stainless Steel
    • Sensor Port Count: 1
    • Inlet Inside Diameter: 2.5in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 3.75in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight
    • Grade Type: Premium Replacement

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 4481758 for 2001 Chrysler Sebring
    • Part # 4481758
    • SKU # 1078603
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. CARB Executive Order D-193-139. Engine Family Number 1CRXV02.4VD0. Certification Level: LEV1 LEV. Legal for use in the state of California, New York and Maine.

    • PRICE: 1496.99
    • Location:: CARB
    • Outlet Quantity: 1
    • Hangers Included: No
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Heat Shield Attached: No
    • Body Length: 11in
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: None
    • Universal Or Specific Fit: Specific
    • Body Shape: Round
    • Oxygen Sensor Location: Midbed
    • Inlet Gasket Included: Yes
    • Overall Length: 39.5in
    • Body Width: 4in
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 2.25in
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 1
    • Inlet Inside Diameter: 2.25in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 4in
    • Outlet Type: Clamp-On
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 4561242 for 2001 Chrysler Sebring
    • Part # 4561242
    • SKU # 1078586
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. CARB Executive Order D-193-142. Engine Family Number 1CRXV0148V40. Certification Level: LEV1 ULEV. Legal for use in the state of California, New York and Maine.

    • PRICE: 1783.99
    • Location:: CARB
    • Universal Or Specific Fit: Specific
    • Oxygen Sensor Location: Midbed
    • Inlet Gasket Included: Yes
    • Mounting Hardware Included: Yes
    • Overall Length: 38.375in
    • Hangers Included: No
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Outlet Type: Clamp-On
    • Finish: Stainless Steel
    • Grade Type: Regular
    • Heat Shield Material: None

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 4481053 for 2001 Chrysler Sebring
    • Part # 4481053
    • SKU # 1078303
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. Rear. CARB Executive Order D-193-139. Engine Family Number 1CRXV03.5VD0. Certification Level: LEV1 LEV. Legal for use in the state of California, New York and Maine.

    • PRICE: 1193.99
    • Location:: CARB
    • Universal Or Specific Fit: Specific
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: Yes
    • Overall Length: 8in
    • Hangers Included: No
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Mounting Hardware Included: Yes
    • Outlet Mounting Hardware Included: No
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Bolt-On
    • Finish: Stainless Steel
    • Grade Type: Regular
    • Heat Shield Material: None

  • Sponsored
    Sponsored
    MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 4481110 for 2001 Chrysler Sebring
    • Part # 4481110
    • SKU # 1078499
    • Location: CARB

    Application: OE Direct Fit - Factory mounting style

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. Front. CARB Executive Order D-193-139. Engine Family Number 1CRXV03.5VD0. Certification Level: LEV1 LEV. Legal for use in the state of California, New York and Maine.

    • PRICE: 1181.99
    • Location:: CARB
    • Universal Or Specific Fit: Specific
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: Yes
    • Mounting Hardware Included: Yes
    • Overall Length: 11.25in
    • Hangers Included: No
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Mounting Hardware Included: Yes
    • Outlet Mounting Hardware Included: No
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Outlet Type: Bolt-On
    • Finish: Stainless Steel
    • Grade Type: Regular
    • Heat Shield Material: None

  • Sponsored
    Sponsored
    AP Universal CARB Catalytic Converter 755005 for 2001 Chrysler Sebring
    • Part # 755005
    • SKU # 368855
    • Location: CARB

    Application: Universal - Requires cut and weld

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Center. CARB Executive Order D-280-102. Engine Family #1DSXV03.0GNG. Certification level: LEV1 LEV. 2.25" inner/ 2.25" outer diameter; 12" overall. Legal for use in the state of California, New York and Maine.

    • PRICE: 483.99
    • Location:: CARB

  • Sponsored
    Sponsored
    AP Universal CARB Catalytic Converter 755014 for 2001 Chrysler Sebring
    • Part # 755014
    • SKU # 368857
    • Location: CARB

    Application: Universal - Requires cut and weld

    Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Center. CARB Executive Order D-280-102. Engine Family #1DSXV02.4GNG. Certification level: LEV1 LEV. 2" inner/ 2" outer diameter; 17.50" overall. Legal for use in the state of California, New York and Maine.

    • PRICE: 347.99
    • Location:: CARB

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Universal Catalytic Converter 2.25in 99005HM for 2001 Chrysler Sebring
    • Part # 99005HM
    • SKU # 461339
    • Location: Federal

    Application: Universal - Requires cut and weld

    Notes: HM Grade converter. Coupe Rear. Cutting and Welding Required During Installation. Not for sale or use in the state of California.

    • PRICE: 276.99
    • Location:: Federal
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: Yes
    • Body Length: 12in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: Aluminized Steel
    • Universal Or Specific Fit: Universal
    • Body Shape: Oval
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Mounting Hardware Included: No
    • Overall Length: 16in
    • Body Width: 5.5in
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 2.25in
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Inside Diameter: 2.25in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 3.75in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight
    • Grade Type: Regular

  • Sponsored
    Sponsored
    Universal Federal Catalytic Converter 99356HM for 2001 Chrysler Sebring
    • Part # 99356HM
    • SKU # 275050
    • Location: Federal

    Application: Universal - Requires cut and weld

    Notes: HM Grade converter. Rear. Cutting and welding required during installation. Not for sale or use in the state of California.

    • PRICE: 234.99
    • Location:: Federal
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: Yes
    • Body Length: 11in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: Aluminized Steel
    • Universal Or Specific Fit: Universal
    • Body Shape: Round
    • Oxygen Sensor Location: Midbed
    • Inlet Gasket Included: No
    • Mounting Hardware Included: No
    • Overall Length: 15in
    • Body Width: 4.25in
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Outlet Inside Diameter: 2.5in
    • Body Material: Stainless Steel
    • Sensor Port Count: 1
    • Inlet Inside Diameter: 2.5in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 4.375in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Direct Fit Catalytic Converter 26203 for 2001 Chrysler Sebring
    • Part # 26203
    • SKU # 937841
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: HM Grade Converter. Not for sale or use in the state of California.

    • PRICE: 838.99
    • Location:: Federal
    • Universal Or Specific Fit: Specific
    • Oxygen Sensor Location: Midbed
    • Inlet Gasket Included: Yes
    • Mounting Hardware Included: Yes
    • Overall Length: 38.375in
    • Hangers Included: No
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Outlet Type: Clamp-On
    • Finish: Stainless Steel
    • Grade Type: Regular
    • Heat Shield Material: None

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Direct Fit Catalytic Converter 93189-BX for 2001 Chrysler Sebring
    • Part # 93189-BX
    • SKU # 81996
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: HM Grade Converter. Rear. Not for sale or use in the state of California.

    • PRICE: 886.99
    • Location:: Federal

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Manifold Catalytic Converter 50824 for 2001 Chrysler Sebring
    • Part # 50824
    • SKU # 108287
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: Manifold converter, HM grade converter. Exhaust manifold with integrated catalytic converter. Not for sale or use in the state of California.

    • PRICE: 1251.99
    • Location:: Federal
    • Inlet Gasket Included: Yes
    • Converter Body Material: Stainless Steel
    • Overall Length: 16.625in
    • Converter Body Length: 7.75in
    • Inlet Type: Flanged
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Type: One-Piece
    • Sensor Port Count: 1
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Outlet Gasket Included: Yes
    • Clamps Included: No
    • Outlet Type: Flanged
    • Finish: Stainless Steel
    • Grade Type: Regular

  • Sponsored
    Sponsored
    MagnaFlow Direct Fit Federal Catalytic Converter 55370MGF for 2001 Chrysler Sebring
    • Part # 55370MGF
    • SKU # 834738
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: HM Grade Converter. Rear. Not for sale or use in the state of California.

    • PRICE: 894.99
    • Location:: Federal
    • Universal Or Specific Fit: Specific
    • Oxygen Sensor Location: Pre Converter
    • Inlet Gasket Included: Yes
    • Overall Length: 53in
    • Hangers Included: Yes
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Body Width: 21.5
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 2.0
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 1
    • Inlet Inside Diameter: 2.0
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Length: 59.0
    • Outlet Gasket Included: Yes
    • Clamps Included: Yes
    • Outlet Type: Bolt-On
    • Finish: Stainless Steel
    • Grade Type: Regular
    • Heat Shield Material: None

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Direct Fit Catalytic Converter 50215 for 2001 Chrysler Sebring
    • Part # 50215
    • SKU # 75851
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: HM Grade Converter. Rear. Not for sale or use in the state of California.

    • PRICE: 992.99
    • Location:: Federal
    • Universal Or Specific Fit: Specific
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Overall Length: 8.25in
    • Hangers Included: No
    • Inlet Type: Bolt-On
    • Air Tube Count: 0
    • Body Width: 7.0
    • Heat Shield Attached: No
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 2.0
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Inside Diameter: 2.0
    • Inlet Mounting Hardware Included: No
    • Body Length: 12.0
    • Outlet Mounting Hardware Included: Yes
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Outlet Type: Bolt-On
    • Finish: Stainless Steel
    • Grade Type: Regular
    • Heat Shield Material: None

  • Sponsored
    Sponsored
    MagnaFlow HM Grade Federal EPA Compliant Direct Fit Catalytic Converter 93187 for 2001 Chrysler Sebring
    • Part # 93187
    • SKU # 980097
    • Location: Federal

    Application: OE Direct Fit - Factory mounting style

    Notes: HM Grade Converter. Front forward. Not for sale or use in the state of California.

    • PRICE: 351.99
    • Location:: Federal
    • Item Grade: OEM Standard
    • Substrate Material: Ceramic
    • Format: Pre-Catalytic Converter and Main Catalytic Converter
    • Exhaust Pipe Outlet Connection Type: Bolt On
    • Oxygen Sensor Location: Pre & Post Catalyst
    • Outlet Diameter (in): 2.0
    • Mount Type: Uses Factory Hangers
    • Housing Material: Stainless Steel
    • CARB Compliant: No
    • Exhaust Pipe Inlet Connection Type: Bolt On
    • Air Tube Adaptable: Not Air Tube Kit Adaptable

  • Sponsored
    Sponsored
    MagnaFlow OEM Grade Federal EPA Compliant Universal Catalytic Converter 2.25in 51005 for 2001 Chrysler Sebring
    • Part # 51005
    • SKU # 513894
    • Location: Federal

    Application: Universal - Requires cut and weld

    Notes: OEM grade converter. Rear. Cutting and welding required during installation. Coupe. Not for sale or use in the state of California.

    • PRICE: 288.99
    • Location:: Federal
    • Outlet Quantity: 1
    • Hangers Included: No
    • Air Tube Count: 0
    • Inlet Type: Weld-On
    • Heat Shield Attached: Yes
    • Body Length: 12in
    • Outlet Gasket Included: No
    • Clamps Included: No
    • Inlet Orientation: Straight
    • Inlet Quantity: 1
    • Finish: Stainless Steel
    • Heat Shield Material: Aluminized Steel
    • Universal Or Specific Fit: Universal
    • Body Shape: Oval
    • Oxygen Sensor Location: None
    • Inlet Gasket Included: No
    • Overall Length: 16in
    • Body Width: 5.625in
    • Substrate Material: Ceramic
    • Outlet Inside Diameter: 2.25in
    • Tube Material: Stainless Steel
    • Body Material: Stainless Steel
    • Sensor Port Count: 0
    • Inlet Inside Diameter: 2.25in
    • Inlet Mounting Hardware Included: No
    • Outlet Mounting Hardware Included: No
    • Body Height: 3.75in
    • Outlet Type: Weld-On
    • Outlet Orientation: Straight
    • Grade Type: Premium Replacement