2013 Dodge Charger Catalytic Converter

Buy Online. Pick Up In-Store.

What are you working on today?

Get an exact fit for your 2013 Dodge Charger

1-22 of 22 Results

1-22 of 22 Results
      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 5561243 for 2013 Dodge Charger
        • Part # 5561243
        • SKU # 1078584
        • Location: CARB

        Application: OE Direct Fit - Factory mounting style

        Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. Left. CARB Executive order D-193-141. Engine family number DCRXV05.7VP1. Certification level: LEV2 ULEV. Rear wheel drive. This product is in compliance with California regulations

        • PRICE: 2235.99
        • Location:: CARB
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Midbed and Post Converter
        • Inlet Gasket Included: No
        • Mounting Hardware Included: No
        • Overall Length: 45in
        • Hangers Included: No
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Inlet Mounting Hardware Included: No
        • Sensor Port Count: 2
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Outlet Type: Clamp-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: None

      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Universal Catalytic Converter 3in 5561209 for 2013 Dodge Charger
        • Part # 5561209
        • SKU # 246004
        • Location: CARB

        Application: Universal - Requires cut and weld

        Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. Left or right. CARB Executive order D-193-141. Engine family number DCRXV05.7VP1. Certification level: LEV2 ULEV. OE Spec. All wheel drive. Cutting and welding required during installation. This product is in compliance with California regulations

        • PRICE: 1497.99
        • Location:: CARB
        • Outlet Quantity: 1
        • Hangers Included: No
        • Air Tube Count: 0
        • Inlet Type: Weld-On
        • Heat Shield Attached: No
        • Body Length: 8.75in
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Inlet Orientation: Straight
        • Inlet Quantity: 1
        • Finish: Stainless Steel
        • Heat Shield Material: None
        • Universal Or Specific Fit: Universal
        • Body Shape: Round
        • Oxygen Sensor Location: None
        • Inlet Gasket Included: No
        • Mounting Hardware Included: No
        • Overall Length: 8.75in
        • Body Width: 4in
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 3in
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Sensor Port Count: 0
        • Inlet Inside Diameter: 3in
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Height: 4in
        • Outlet Type: Weld-On
        • Outlet Orientation: Straight

      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 5561100 for 2013 Dodge Charger
        • Part # 5561100
        • SKU # 1078505
        • Location: CARB

        Application: OE Direct Fit - Factory mounting style

        Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. Right. CARB Executive Order D-193-141. Engine Family Number DCRXV03.6UPA, DCRXV03.6VP0. Certification Level: LEV2 ULEV. 2 Bolt Flange. Legal for use in the state of California, New York and Maine.

        • PRICE: 1798.99
        • Location:: CARB
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Pre Converter and Midbed
        • Inlet Gasket Included: No
        • Overall Length: 52.125in
        • Mounting Hardware Included: No
        • Hangers Included: No
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Inlet Mounting Hardware Included: No
        • Sensor Port Count: 2
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Outlet Type: Clamp-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: None

      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 5561101 for 2013 Dodge Charger
        • Part # 5561101
        • SKU # 1078519
        • Location: CARB

        Application: OE Direct Fit - Factory mounting style

        Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. Left. CARB Executive Order D-193-141. Engine Family Number DCRXV03.6UPA, DCRXV03.6VP0. Certification Level: LEV2 ULEV. 2 Bolt Flange. Legal for use in the state of California, New York and Maine.

        • PRICE: 1895.99
        • Location:: CARB
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Pre Converter and Midbed
        • Inlet Gasket Included: No
        • Mounting Hardware Included: No
        • Overall Length: 50.375in
        • Hangers Included: No
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Inlet Mounting Hardware Included: No
        • Sensor Port Count: 2
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Outlet Type: Clamp-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: None

      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Universal Catalytic Converter 2.5in 5561356 for 2013 Dodge Charger
        • Part # 5561356
        • SKU # 244006
        • Location: CARB

        Application: Universal - Requires cut and weld

        Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. Left or right. CARB Executive order D-193-141. Engine family number DCRXV05.7VP1. Certification level: LEV2 ULEV. OE Spec. Rear wheel drive. Cutting and welding required during installation. This product is in compliance with California regulations

        • PRICE: 1531.99
        • Location:: CARB
        • Outlet Quantity: 1
        • Hangers Included: No
        • Air Tube Count: 0
        • Inlet Type: Weld-On
        • Heat Shield Attached: No
        • Body Length: 11in
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Inlet Orientation: Straight
        • Inlet Quantity: 1
        • Finish: Stainless Steel
        • Heat Shield Material: None
        • Universal Or Specific Fit: Universal
        • Body Shape: Round
        • Oxygen Sensor Location: Midbed
        • Inlet Gasket Included: No
        • Overall Length: 11in
        • Mounting Hardware Included: No
        • Body Width: 4in
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Outlet Inside Diameter: 2.5in
        • Body Material: Stainless Steel
        • Sensor Port Count: 1
        • Inlet Inside Diameter: 2.5in
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Height: 4in
        • Outlet Type: Weld-On
        • Outlet Orientation: Straight

      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 5561244 for 2013 Dodge Charger
        • Part # 5561244
        • SKU # 1078254
        • Location: CARB

        Application: OE Direct Fit - Factory mounting style

        Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. Right. CARB Executive order D-193-141. Engine family number DCRXV05.7VP1. Certification level: LEV2 ULEV. Rear wheel drive. This product is in compliance with California regulations

        • PRICE: 2222.99
        • Location:: CARB
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Midbed and Post Converter
        • Inlet Gasket Included: No
        • Overall Length: 46.375in
        • Mounting Hardware Included: No
        • Hangers Included: No
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Inlet Mounting Hardware Included: No
        • Sensor Port Count: 2
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Outlet Type: Clamp-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: None

      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Universal Catalytic Converter 2.5in 5461336 for 2013 Dodge Charger
        • Part # 5461336
        • SKU # 243943
        • Location: CARB

        Application: Universal - Requires cut and weld

        Notes: Left, right, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. MEX region. DCRXV06.44P0. Cutting and welding required during installation. OEM spec. 2.50" universal California OBDII catalytic converter. Certification level : LEV2 low emissions vehicle. CARB executive order D-193-140. Legal for use in the state of California, New York and Maine.

        • PRICE: 1418.99
        • Location:: CARB
        • Outlet Quantity: 1
        • Hangers Included: No
        • Air Tube Count: 0
        • Inlet Type: Weld-On
        • Heat Shield Attached: No
        • Body Length: 11in
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Inlet Orientation: Straight
        • Inlet Quantity: 1
        • Finish: Stainless Steel
        • Heat Shield Material: None
        • Universal Or Specific Fit: Universal
        • Body Shape: Round
        • Oxygen Sensor Location: Midbed
        • Inlet Gasket Included: No
        • Overall Length: 11in
        • Mounting Hardware Included: No
        • Body Width: 4in
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Outlet Inside Diameter: 2.5in
        • Body Material: Stainless Steel
        • Sensor Port Count: 1
        • Inlet Inside Diameter: 2.5in
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Height: 4in
        • Outlet Type: Weld-On
        • Outlet Orientation: Straight

      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 5561584 for 2013 Dodge Charger
        • Part # 5561584
        • SKU # 1078263
        • Location: CARB

        Application: OE Direct Fit - Factory mounting style

        Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. Left. CARB Executive order D-193-141. Engine family number DCRXV05.7VP1. Certification level: LEV2 ULEV. All wheel drive. This product is in compliance with California regulations

        • PRICE: 2243.99
        • Location:: CARB
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Post Converter
        • Inlet Gasket Included: No
        • Mounting Hardware Included: No
        • Overall Length: 47.625in
        • Hangers Included: No
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Sensor Port Count: 1
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Outlet Type: Clamp-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: None

      • Sponsored
        Sponsored
        MagnaFlow California CARB Compliant Direct Fit Catalytic Converter 5561585 for 2013 Dodge Charger
        • Part # 5561585
        • SKU # 1078589
        • Location: CARB

        Application: OE Direct Fit - Factory mounting style

        Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. Right. CARB Executive order D-193-141. Engine family number DCRXV05.7VP1. Certification level: LEV2 ULEV. All wheel drive. This product is in compliance with California regulations

        • PRICE: 2236.99
        • Location:: CARB
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Post Converter
        • Inlet Gasket Included: No
        • Overall Length: 46in
        • Mounting Hardware Included: No
        • Hangers Included: No
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Sensor Port Count: 1
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Outlet Type: Clamp-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: None

      • Sponsored
        Sponsored
        MagnaFlow HM Grade Federal EPA Compliant Direct Fit Catalytic Converter 26205 for 2013 Dodge Charger
        • Part # 26205
        • SKU # 937992
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: HM Grade converter. Right. Rear wheel drive. Not for sale or use in the state of California.

        • PRICE: 691.99
        • Location:: Federal
        • Body Width: 42.75
        • Universal Or Specific Fit: Direct OE Replacement
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2.5
        • Body Material: Stainless Steel
        • Inlet Inside Diameter: 2.5
        • Body Length: 42.75
        • Overall Length: 42.75
        • Grade Type: OEM Standard

      • Sponsored
        Sponsored
        MagnaFlow HM Grade Federal EPA Compliant Direct Fit Catalytic Converter 26204 for 2013 Dodge Charger
        • Part # 26204
        • SKU # 163446
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: HM Grade converter. Left. Rear wheel drive. Not for sale or use in the state of California.

        • PRICE: 703.99
        • Location:: Federal

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Manifold Catalytic Converter 22-141 for 2013 Dodge Charger
        • Part # 22-141
        • SKU # 1101935
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Right, Catalytic Converter with Integrated Exhaust Manifold. 4 bolt flange. Exhaust manifold with integrated catalytic converter OEM grade federal (except California). Not for sale or use in the state of California.

        • PRICE: 771.99
        • Location:: Federal
        • Inlet Gasket Included: No
        • Converter Body Material: Stainless Steel
        • Overall Length: 66.75in
        • Converter Body Length: 11in
        • Inlet Type: Flanged
        • Type: Two-Piece
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Inlet Mounting Hardware Included: No
        • Sensor Port Count: 2
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: No
        • Clamps Included: Yes
        • Outlet Type: Flanged
        • Finish: Stainless Steel
        • Grade Type: Regular

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Direct Fit Catalytic Converter 51585 for 2013 Dodge Charger
        • Part # 51585
        • SKU # 566516
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: OEM grade converter. Right. All wheel drive. Not for sale or use in the state of California.

        • PRICE: 1012.99
        • Location:: Federal
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Post Converter
        • Inlet Gasket Included: No
        • Overall Length: 46.375in
        • Hangers Included: No
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Body Width: 5.0
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2.5
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Sensor Port Count: 1
        • Inlet Mounting Hardware Included: No
        • Inlet Inside Diameter: 2.5
        • Outlet Mounting Hardware Included: No
        • Body Length: 13.0
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Outlet Type: Clamp-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: None

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Manifold Catalytic Converter 22-139 for 2013 Dodge Charger
        • Part # 22-139
        • SKU # 1101916
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Left, Catalytic Converter with Integrated Exhaust Manifold. 4 bolt flange. Exhaust manifold with integrated catalytic converter OEM grade federal (except California). Not for sale or use in the state of California.

        • PRICE: 884.99
        • Location:: Federal
        • Inlet Gasket Included: No
        • Converter Body Material: Stainless Steel
        • Overall Length: 56.375in
        • Converter Body Length: 11in
        • Inlet Type: Flanged
        • Type: Two-Piece
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Inlet Mounting Hardware Included: No
        • Sensor Port Count: 2
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: No
        • Clamps Included: Yes
        • Outlet Type: Flanged
        • Finish: Stainless Steel
        • Grade Type: Regular

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Direct Fit Catalytic Converter 51584 for 2013 Dodge Charger
        • Part # 51584
        • SKU # 566515
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: OEM grade converter. Left. All wheel drive. Not for sale or use in the state of California.

        • PRICE: 961.99
        • Location:: Federal
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Post Converter
        • Inlet Gasket Included: No
        • Overall Length: 49.25in
        • Hangers Included: No
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Body Width: 5.0
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2.5
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Sensor Port Count: 1
        • Inlet Mounting Hardware Included: No
        • Inlet Inside Diameter: 2.5
        • Outlet Mounting Hardware Included: No
        • Body Length: 13.0
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Outlet Type: Clamp-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: None

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Direct Fit Catalytic Converter 49243 for 2013 Dodge Charger
        • Part # 49243
        • SKU # 423956
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: OEM grade converter. Left. Rear wheel drive. Not for sale or use in the state of California.

        • PRICE: 879.99
        • Location:: Federal
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Midbed and Post Converter
        • Inlet Gasket Included: No
        • Overall Length: 45in
        • Hangers Included: No
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Inlet Mounting Hardware Included: No
        • Sensor Port Count: 2
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Outlet Type: Clamp-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: None

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Universal Catalytic Converter 2.5in 51356 for 2013 Dodge Charger
        • Part # 51356
        • SKU # 546234
        • Location: Federal

        Application: Universal - Requires cut and weld

        Notes: Left, right, Catalytic Converter. MEX region. Cutting and welding required during installation. Universal oem grade federal (exc.ca). Not for sale or use in the state of California.

        • PRICE: 251.99
        • Location:: Federal
        • Outlet Quantity: 1
        • Hangers Included: No
        • Air Tube Count: 0
        • Inlet Type: Weld-On
        • Heat Shield Attached: Yes
        • Body Length: 11in
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Inlet Orientation: Straight
        • Inlet Quantity: 1
        • Finish: Stainless Steel
        • Heat Shield Material: Aluminized Steel
        • Universal Or Specific Fit: Universal
        • Body Shape: Round
        • Oxygen Sensor Location: Midbed
        • Inlet Gasket Included: No
        • Overall Length: 15in
        • Body Width: 4.25in
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Outlet Inside Diameter: 2.5in
        • Body Material: Stainless Steel
        • Sensor Port Count: 1
        • Inlet Inside Diameter: 2.5in
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Height: 4.375in
        • Outlet Type: Weld-On
        • Outlet Orientation: Straight
        • Grade Type: Premium Replacement

      • Sponsored
        Sponsored
        MagnaFlow OEM Grade Federal EPA Compliant Direct Fit Catalytic Converter 49244 for 2013 Dodge Charger
        • Part # 49244
        • SKU # 422158
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: OEM grade converter. Right. Rear wheel drive. Not for sale or use in the state of California.

        • PRICE: 863.99
        • Location:: Federal
        • Universal Or Specific Fit: Specific
        • Oxygen Sensor Location: Midbed and Post Converter
        • Inlet Gasket Included: No
        • Overall Length: 46.375in
        • Hangers Included: No
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Heat Shield Attached: No
        • Substrate Material: Ceramic
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Inlet Mounting Hardware Included: No
        • Sensor Port Count: 2
        • Outlet Mounting Hardware Included: No
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Outlet Type: Clamp-On
        • Finish: Stainless Steel
        • Grade Type: Regular
        • Heat Shield Material: None

      • Sponsored
        Sponsored
        MagnaFlow Direct Fit Federal Catalytic Converter 21-577 for 2013 Dodge Charger
        • Part # 21-577
        • SKU # 1212618
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Right, Catalytic Converter. MEX region. Direct-fit oem grade federal (exc.ca). Not for sale or use in the state of California.

        • PRICE: 588.99
        • Location:: Federal
        • Outlet Quantity: 1
        • Hangers Included: No
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Heat Shield Attached: No
        • Body Length: 9in
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Inlet Quantity: 1
        • Finish: Stainless Steel
        • Heat Shield Material: None
        • Universal Or Specific Fit: Specific
        • Body Shape: Round
        • Oxygen Sensor Location: Pre and Post Converter
        • Inlet Gasket Included: No
        • Mounting Hardware Included: No
        • Overall Length: 45in
        • Body Width: 4in
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2.75in
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Inlet Inside Diameter: 3in
        • Sensor Port Count: 3
        • Inlet Mounting Hardware Included: No
        • Outlet Mounting Hardware Included: No
        • Body Height: 4in
        • Outlet Type: Clamp-On
        • Grade Type: Regular

      • Sponsored
        Sponsored
        MagnaFlow Direct Fit Federal Catalytic Converter 21-576 for 2013 Dodge Charger
        • Part # 21-576
        • SKU # 1212565
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Left, Catalytic Converter. MEX region. Direct-fit oem grade federal (exc.ca). Not for sale or use in the state of California.

        • PRICE: 588.99
        • Location:: Federal
        • Outlet Quantity: 1
        • Hangers Included: No
        • Inlet Type: Bolt-On
        • Air Tube Count: 0
        • Heat Shield Attached: No
        • Body Length: 9in
        • Outlet Gasket Included: No
        • Clamps Included: No
        • Inlet Quantity: 1
        • Finish: Stainless Steel
        • Heat Shield Material: None
        • Universal Or Specific Fit: Specific
        • Body Shape: Round
        • Oxygen Sensor Location: Pre and Post Converter
        • Inlet Gasket Included: No
        • Overall Length: 45.5in
        • Mounting Hardware Included: No
        • Body Width: 4in
        • Substrate Material: Ceramic
        • Outlet Inside Diameter: 2.75in
        • Tube Material: Stainless Steel
        • Body Material: Stainless Steel
        • Inlet Inside Diameter: 3in
        • Sensor Port Count: 3
        • Inlet Mounting Hardware Included: Yes
        • Outlet Mounting Hardware Included: No
        • Body Height: 4in
        • Outlet Type: Clamp-On
        • Grade Type: Regular

      • Sponsored
        Sponsored
        AP Exhaust Direct Fit Federal Catalytic Converter 643152 for 2013 Dodge Charger
        • Part # 643152
        • SKU # 1076818
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Left. Rear wheel drive. Not for sale or use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details.

        • PRICE: 689.99
        • Location:: Federal

      • Sponsored
        Sponsored
        AP Exhaust Direct Fit Federal Catalytic Converter 643153 for 2013 Dodge Charger
        • Part # 643153
        • SKU # 1076649
        • Location: Federal

        Application: OE Direct Fit - Factory mounting style

        Notes: Right. Rear wheel drive. Not for sale or use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details.

        • PRICE: 695.99
        • Location:: Federal

      About


      2013 Dodge Charger Catalytic Converter

      2013 Dodge Charger catalytic converters remove exhaust contaminants before they are sent from the car into the air. When the part is worn, fuel economy can worse, performance can be sluggish, and a functioning one may be required for state emissions. Buy a 2013 Charger catalytic converter online and get free shipping with next day delivery or pick up your purchase at a store near you today.