2014 Dodge Charger Catalytic Converter

Application: OE Direct Fit - Factory mounting style

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. Left. CARB Executive Order D-193-141. Engine Family Number ECRXV03.65P0, ECRXV03.65PA. Certification Level: LEV2 ULEV. 2 Bolt Flange. Legal for use in the state of California, New York and Maine.

• PRICE: 1895.99
• Location:: CARB
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Pre Converter and Midbed
• Inlet Gasket Included: No
• Mounting Hardware Included: No
• Overall Length: 50.375in
• Hangers Included: No
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 2
• Outlet Mounting Hardware Included: No
• Outlet Gasket Included: No
• Clamps Included: No
• Outlet Type: Clamp-On
• Finish: Stainless Steel
• Grade Type: Regular
• Heat Shield Material: None

Application: OE Direct Fit - Factory mounting style

Notes: Left, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. RWD. MEX region. ECRXV05.75P0. Direct-fit California OBDII converters. Certification level : LEV2 ultra low emissions vehicle. CARB executive order D-193-141. Legal for use in the state of California, New York and Maine.

• PRICE: 2235.99
• Location:: CARB
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Midbed and Post Converter
• Inlet Gasket Included: No
• Mounting Hardware Included: No
• Overall Length: 45in
• Hangers Included: No
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 2
• Outlet Mounting Hardware Included: No
• Outlet Gasket Included: No
• Clamps Included: No
• Outlet Type: Clamp-On
• Finish: Stainless Steel
• Grade Type: Regular
• Heat Shield Material: None

Application: Universal - Requires cut and weld

Notes: Left, right, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. MEX region. ECRXV06.45P0. Cutting and welding required during installation. OEM spec. 2.50" universal California OBDII catalytic converter. Certification level : LEV2 low emissions vehicle. CARB executive order D-193-140. Legal for use in the state of California, New York and Maine.

• PRICE: 1418.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: No
• Body Length: 11in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: None
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Oxygen Sensor Location: Midbed
• Inlet Gasket Included: No
• Overall Length: 11in
• Mounting Hardware Included: No
• Body Width: 4in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Sensor Port Count: 1
• Inlet Inside Diameter: 2.5in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4in
• Outlet Type: Weld-On
• Outlet Orientation: Straight

Application: OE Direct Fit - Factory mounting style

Notes: Right, Verify EFN (Engine Family Number) found on emission label on vehicle. Catalytic Converter. RWD. MEX region. ECRXV05.75P0. Direct-fit California OBDII converters. Certification level : LEV2 ultra low emissions vehicle. CARB executive order D-193-141. Legal for use in the state of California, New York and Maine.

• PRICE: 2222.99
• Location:: CARB
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Midbed and Post Converter
• Inlet Gasket Included: No
• Overall Length: 46.375in
• Mounting Hardware Included: No
• Hangers Included: No
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 2
• Outlet Mounting Hardware Included: No
• Outlet Gasket Included: No
• Clamps Included: No
• Outlet Type: Clamp-On
• Finish: Stainless Steel
• Grade Type: Regular
• Heat Shield Material: None

Application: OE Direct Fit - Factory mounting style

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. Right. CARB Executive Order D-193-141. Engine Family Number ECRXV03.65P0, ECRXV03.65PA. Certification Level: LEV2 ULEV. 2 Bolt Flange. Legal for use in the state of California, New York and Maine.

• PRICE: 1798.99
• Location:: CARB
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Pre Converter and Midbed
• Inlet Gasket Included: No
• Overall Length: 52.125in
• Mounting Hardware Included: No
• Hangers Included: No
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 2
• Outlet Mounting Hardware Included: No
• Outlet Gasket Included: No
• Clamps Included: No
• Outlet Type: Clamp-On
• Finish: Stainless Steel
• Grade Type: Regular
• Heat Shield Material: None

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. 2.50". Left, Right. CARB Executive Order D-193-141. Engine Family Number ECRXV03.65P0, ECRXV03.65PA. Certification Level: LEV2 ULEV. OE Spec. 2 Bolt Flange. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

• PRICE: 1531.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: No
• Body Length: 11in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: None
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Oxygen Sensor Location: Midbed
• Inlet Gasket Included: No
• Overall Length: 11in
• Mounting Hardware Included: No
• Body Width: 4in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Sensor Port Count: 1
• Inlet Inside Diameter: 2.5in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4in
• Outlet Type: Weld-On
• Outlet Orientation: Straight

Application: Universal - Requires cut and weld

Notes: Left, right, Catalytic Converter. RWD. MEX region. Cutting and welding required during installation. Universal hm grade federal (except California). Not legal for sale in California.

• PRICE: 234.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 11in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Oxygen Sensor Location: Midbed
• Inlet Gasket Included: No
• Mounting Hardware Included: No
• Overall Length: 15in
• Body Width: 4.25in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Sensor Port Count: 1
• Inlet Inside Diameter: 2.5in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4.375in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Regular

Application: OE Direct Fit - Factory mounting style

Notes: HM Grade converter. Right. Rear wheel drive. Not for sale or use in the state of California.

• PRICE: 691.99
• Location:: Federal
• Body Width: 42.75
• Universal Or Specific Fit: Direct OE Replacement
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.5
• Body Material: Stainless Steel
• Inlet Inside Diameter: 2.5
• Body Length: 42.75
• Overall Length: 42.75
• Grade Type: OEM Standard

Application: OE Direct Fit - Factory mounting style

Notes: HM Grade converter. Left. Rear wheel drive. Not for sale or use in the state of California.

• PRICE: 703.99
• Location:: Federal

Application: OE Direct Fit - Factory mounting style

Notes: Right, Catalytic Converter. RWD. MEX region. Direct-fit oem grade federal (exc.ca). Not for sale or use in the state of California.

• PRICE: 863.99
• Location:: Federal
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Midbed and Post Converter
• Inlet Gasket Included: No
• Overall Length: 46.375in
• Hangers Included: No
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 2
• Outlet Mounting Hardware Included: No
• Outlet Gasket Included: No
• Clamps Included: No
• Outlet Type: Clamp-On
• Finish: Stainless Steel
• Grade Type: Regular
• Heat Shield Material: None

Application: OE Direct Fit - Factory mounting style

Notes: Right, Catalytic Converter with Integrated Exhaust Manifold. 4 bolt flange. Exhaust manifold with integrated catalytic converter OEM grade federal (except California). Not for sale or use in the state of California.

• PRICE: 771.99
• Location:: Federal
• Inlet Gasket Included: No
• Converter Body Material: Stainless Steel
• Overall Length: 66.75in
• Converter Body Length: 11in
• Inlet Type: Flanged
• Type: Two-Piece
• Heat Shield Attached: No
• Substrate Material: Ceramic
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 2
• Outlet Mounting Hardware Included: No
• Outlet Gasket Included: No
• Clamps Included: Yes
• Outlet Type: Flanged
• Finish: Stainless Steel
• Grade Type: Regular

Application: OE Direct Fit - Factory mounting style

Notes: Left, Catalytic Converter with Integrated Exhaust Manifold. 4 bolt flange. Exhaust manifold with integrated catalytic converter OEM grade federal (except California). Not for sale or use in the state of California.

• PRICE: 884.99
• Location:: Federal
• Inlet Gasket Included: No
• Converter Body Material: Stainless Steel
• Overall Length: 56.375in
• Converter Body Length: 11in
• Inlet Type: Flanged
• Type: Two-Piece
• Heat Shield Attached: No
• Substrate Material: Ceramic
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 2
• Outlet Mounting Hardware Included: No
• Outlet Gasket Included: No
• Clamps Included: Yes
• Outlet Type: Flanged
• Finish: Stainless Steel
• Grade Type: Regular

Application: Universal - Requires cut and weld

Notes: Left, right, Catalytic Converter. RWD. MEX region. Cutting and welding required during installation. Universal oem grade federal (exc.ca). Not for sale or use in the state of California.

• PRICE: 251.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 11in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Oxygen Sensor Location: Midbed
• Inlet Gasket Included: No
• Overall Length: 15in
• Body Width: 4.25in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Sensor Port Count: 1
• Inlet Inside Diameter: 2.5in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4.375in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Premium Replacement

Application: OE Direct Fit - Factory mounting style

Notes: Left, Catalytic Converter. RWD. MEX region. Direct-fit oem grade federal (exc.ca). Not for sale or use in the state of California.

• PRICE: 879.99
• Location:: Federal
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Midbed and Post Converter
• Inlet Gasket Included: No
• Overall Length: 45in
• Hangers Included: No
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 2
• Outlet Mounting Hardware Included: No
• Outlet Gasket Included: No
• Clamps Included: No
• Outlet Type: Clamp-On
• Finish: Stainless Steel
• Grade Type: Regular
• Heat Shield Material: None

Application: OE Direct Fit - Factory mounting style

Notes: Right, Catalytic Converter. MEX region. Direct-fit oem grade federal (exc.ca). Not for sale or use in the state of California.

• PRICE: 588.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Body Length: 9in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: None
• Universal Or Specific Fit: Specific
• Body Shape: Round
• Oxygen Sensor Location: Pre and Post Converter
• Inlet Gasket Included: No
• Mounting Hardware Included: No
• Overall Length: 45in
• Body Width: 4in
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.75in
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Inside Diameter: 3in
• Sensor Port Count: 3
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4in
• Outlet Type: Clamp-On
• Grade Type: Regular

Application: OE Direct Fit - Factory mounting style

Notes: Left, Catalytic Converter. MEX region. Direct-fit oem grade federal (exc.ca). Not for sale or use in the state of California.

• PRICE: 588.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Body Length: 9in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: None
• Universal Or Specific Fit: Specific
• Body Shape: Round
• Oxygen Sensor Location: Pre and Post Converter
• Inlet Gasket Included: No
• Overall Length: 45.5in
• Mounting Hardware Included: No
• Body Width: 4in
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.75in
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Inside Diameter: 3in
• Sensor Port Count: 3
• Inlet Mounting Hardware Included: Yes
• Outlet Mounting Hardware Included: No
• Body Height: 4in
• Outlet Type: Clamp-On
• Grade Type: Regular

Application: OE Direct Fit - Factory mounting style

Notes: Left. Rear wheel drive. Not for sale or use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details.

• PRICE: 689.99
• Location:: Federal

Application: OE Direct Fit - Factory mounting style

Notes: Right. Rear wheel drive. Not for sale or use on vehicles licensed in the state of California and New York (New York vehicles with California Emissions). Check with your state authority for details.

• PRICE: 695.99
• Location:: Federal