2001 Dodge Ram 1500 Catalytic Converter

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. 2". CARB Executive Order D-193-103. Engine Family Number 1CRXA0318H31, 1CRXA0360H38, 1CRXA0360J38. Certification Level: LEV1 LEV. OE Spec. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

• PRICE: 555.99
• Location:: CARB
• Body Width: 5.25
• Universal Or Specific Fit: Universal
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.0
• Body Material: Stainless Steel
• Inlet Inside Diameter: 2.0
• Body Length: 11.5
• Overall Length: 11.5
• Grade Type: Premium Replacement

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. 2.50". Rear. CARB Executive Order D-193-103. Engine Family Number 1CRXA0318H31, 1CRXA0360H38, 1CRXA0360J38. Certification Level: LEV1 LEV. OE Spec. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

• PRICE: 521.99
• Location:: CARB
• Body Width: 5.5
• Universal Or Specific Fit: Universal
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.5
• Body Material: Stainless Steel
• Inlet Inside Diameter: 2.5
• Body Length: 9.0
• Overall Length: 9.0
• Grade Type: Premium Replacement

Application: OE Direct Fit - Factory mounting style

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. CARB Executive Order D-193-136. Engine Family Number 1CRXA0360J11, 1CRXA0360J18, 1CRXT05.95B1 or 1CRXT05.95B8. Certification Level: TIER1. Legal for use in the state of California, New York and Maine.

• PRICE: 1869.99
• Location:: CARB
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Pre and Post Converter
• Inlet Gasket Included: No
• Overall Length: 50.875in
• Mounting Hardware Included: No
• Hangers Included: Yes
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: Yes
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 2
• Outlet Mounting Hardware Included: No
• Outlet Gasket Included: No
• Clamps Included: No
• Outlet Type: Clamp-On
• Finish: Stainless Steel
• Grade Type: Regular
• Heat Shield Material: Aluminized Steel

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. 2.50". CARB Executive Order D-193-136. Engine Family Number 1CRXT03.95B2, 1CRXT03.95B9. Certification Level: TIER1. OE Spec. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

• PRICE: 871.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: No
• Body Length: 13in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: None
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Oxygen Sensor Location: Post Converter
• Inlet Gasket Included: No
• Mounting Hardware Included: No
• Overall Length: 13in
• Body Width: 4in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Sensor Port Count: 1
• Inlet Inside Diameter: 2.5in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4in
• Outlet Type: Weld-On
• Outlet Orientation: Straight

Application: OE Direct Fit - Factory mounting style

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII Catalytic Converter. CARB Executive Order D-193-103. Engine Family Number 1CRXA0360H38 or 1CRXA0360J38. Certification Level: LEV1 LEV. Legal for use in the state of California, New York and Maine.

• PRICE: 2148.99
• Location:: CARB
• Hangers Included: Yes
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Body Length: 11.25
• Outlet Gasket Included: No
• Clamps Included: Yes
• Finish: Stainless Steel
• Heat Shield Material: None
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Pre and Post Converter
• Inlet Gasket Included: No
• Mounting Hardware Included: Yes
• Overall Length: 47.75in
• Body Width: 4.0
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.25
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 4
• Inlet Inside Diameter: 2.5
• Outlet Mounting Hardware Included: No
• Outlet Type: Weld-On
• Grade Type: Regular

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. 2-2.5". CARB Executive Order D-193-136. Engine Family Number 1CRXA0360J18, 1CRXT05.95B1, 1CRXT05.95B8. Certification Level: TIER1. OE Spec. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

• PRICE: 874.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 14in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 2
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Oval
• Oxygen Sensor Location: Pre Converter
• Inlet Gasket Included: No
• Mounting Hardware Included: No
• Overall Length: 16in
• Body Width: 7in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Sensor Port Count: 1
• Inlet Inside Diameter: 2in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 3.75in
• Outlet Type: Weld-On
• Outlet Orientation: Straight

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. 2.50". Rear. CARB Executive Order D-193-101. Engine Family Number 1CRXA0360H41, 1CRXA0360J41. Certification Level: LEV1 ULEV. OE Spec. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

• PRICE: 672.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 12in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Oval
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Overall Length: 16in
• Body Width: 6.375in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2.5in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 3.75in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Premium Replacement

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. 2". Front Left, Front Right. CARB Executive Order D-193-101. Engine Family Number 1CRXA0360H41, 1CRXA0360J41. Certification Level: LEV1 ULEV. OE Spec. Cutting and welding required during installation. Legal for use in the state of California, New York and Maine.

• PRICE: 561.99
• Location:: CARB
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 9in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Round
• Oxygen Sensor Location: None
• Inlet Gasket Included: No
• Overall Length: 13in
• Body Width: 4.375in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2in
• Body Material: Stainless Steel
• Sensor Port Count: 0
• Inlet Inside Diameter: 2in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 4.375in
• Outlet Type: Weld-On
• Outlet Orientation: Straight

Application: OE Direct Fit - Factory mounting style

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. OBDII catalytic converter. CARB Executive Order D-193-136. Engine Family Number 1CRXT03.95B2, 1CRXT03.95B9. Certification Level: TIER1. Legal for use in the state of California, New York and Maine.

• PRICE: 1638.99
• Location:: CARB
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Pre and Post Converter
• Inlet Gasket Included: No
• Overall Length: 52.125in
• Mounting Hardware Included: Yes
• Hangers Included: Yes
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 2
• Outlet Mounting Hardware Included: No
• Outlet Gasket Included: No
• Clamps Included: Yes
• Outlet Type: Clamp-On
• Finish: Stainless Steel
• Grade Type: Regular
• Heat Shield Material: None

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Center. CARB Executive Order D-280-101. Engine Family #1CRXT03.95B2. Certification level: TIER1. 2" inner/ 2.5" outer diameter; 17" overall. Legal for use in the state of California, New York and Maine.

• PRICE: 492.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Front left or front right. CARB Executive Order D-280-107. Engine Family #1CRXA0360H41. Certification level: LEV1 ULEV. 2.5" inner/ 2.5" outer diameter; 16.5" overall; LG oval; with O2 fitting. Legal for use in the state of California, New York and Maine.

• PRICE: 395.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Optional universal converter - Sizing may be required. Front left or front right. CARB Executive Order D-280-107. Engine Family #1CRXA0360H41. Certification level: LEV1 ULEV. 2.25" inner/ 2.25" outer diameter; 15.5" overall. Legal for use in the state of California, New York and Maine.

• PRICE: 711.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Optional universal converter - Sizing may be required. Center. CARB Executive Order D-280-107. Engine Family #1CRXA0360J41. Certification level: LEV1 ULEV. 3" inner/ 3" outer diameter; 15.5" overall. Legal for use in the state of California, New York and Maine.

• PRICE: 711.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Optional universal converter - Sizing may be required. Front left or front right. CARB Executive Order D-280-107. Engine Family #1CRXA0360H41. Certification level: LEV1 ULEV. 2" inner/ 2" outer diameter; 14" overall; 4" round; with O2 fitting. Legal for use in the state of California, New York and Maine.

• PRICE: 399.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Center. CARB Executive Order D-280-107. Engine Family #1CRXA0360J41. Certification level: LEV1 ULEV. 3" inner/ 3" outer diameter; 16.5" overall. Legal for use in the state of California, New York and Maine.

• PRICE: 381.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Optional universal converter - Sizing may be required. Front left or front right. CARB Executive Order D-280-107. Engine Family #1CRXA0360H41. Certification level: LEV1 ULEV. 2.25" inner/ 2.25" outer diameter; 15.5" overall; 5" round; with O2 fitting. Legal for use in the state of California, New York and Maine.

• PRICE: 711.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: Verify EFN (Engine Family Number) found on emission label on vehicle. Optional universal converter - Sizing may be required. Center. CARB Executive Order D-280-107. Engine Family #1CRXA0360J41. Certification level: LEV1 ULEV. 3" inner/ 3" outer diameter; 16" overall. Legal for use in the state of California, New York and Maine.

• PRICE: 401.99
• Location:: CARB

Application: Universal - Requires cut and weld

Notes: HM Grade converter. Cutting and welding required during installation. Not for sale or use in the state of California.

• PRICE: 268.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 12in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Oval
• Oxygen Sensor Location: Post Converter
• Inlet Gasket Included: No
• Mounting Hardware Included: No
• Overall Length: 16in
• Body Width: 5.5in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Sensor Port Count: 1
• Inlet Inside Diameter: 2.5in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 3.75in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Regular

Application: OE Direct Fit - Factory mounting style

Notes: HM Grade Converter. Not for sale or use in the state of California.

• PRICE: 465.99
• Location:: Federal

Application: Universal - Requires cut and weld

Notes: OEM grade converter. Cutting and welding required during installation. Not for sale or use in the state of California.

• PRICE: 428.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 12in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 2
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Oval
• Oxygen Sensor Location: Pre and Post Converter
• Inlet Gasket Included: No
• Overall Length: 16in
• Body Width: 6.375in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Inlet Inside Diameter: 2in
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 2
• Outlet Mounting Hardware Included: No
• Body Height: 3.75in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Premium Replacement

Application: OE Direct Fit - Factory mounting style

Notes: OEM grade converter. Not for sale or use in the state of California.

• PRICE: 578.99
• Location:: Federal
• Hangers Included: Yes
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: Yes
• Body Length: 12.0
• Outlet Gasket Included: No
• Clamps Included: No
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Pre and Post Converter
• Inlet Gasket Included: No
• Overall Length: 50.875in
• Mounting Hardware Included: No
• Body Width: 7.0
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.5
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Inlet Inside Diameter: 2.0
• Inlet Mounting Hardware Included: No
• Sensor Port Count: 2
• Outlet Mounting Hardware Included: No
• Outlet Type: Clamp-On
• Grade Type: Regular

Application: Universal - Requires cut and weld

Notes: HM Grade converter. Cutting and welding required during installation. Not for sale or use in the state of California.

• PRICE: 421.99
• Location:: Federal
• Body Width: 6.375
• Universal Or Specific Fit: Universal
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.5
• Body Material: Stainless Steel
• Inlet Inside Diameter: 2.0
• Body Length: 16.0
• Overall Length: 16.0
• Grade Type: Premium Replacement

Application: OE Direct Fit - Factory mounting style

Notes: HM Grade Converter. Not for sale or use in the state of California.

• PRICE: 579.99
• Location:: Federal
• Hangers Included: Yes
• Inlet Type: Bolt-On
• Air Tube Count: 0
• Heat Shield Attached: No
• Body Length: 48.0
• Outlet Gasket Included: No
• Clamps Included: Yes
• Finish: Stainless Steel
• Heat Shield Material: None
• Universal Or Specific Fit: Specific
• Oxygen Sensor Location: Pre and Post Converter
• Inlet Gasket Included: No
• Mounting Hardware Included: Yes
• Overall Length: 53.5in
• Body Width: 12.0
• Substrate Material: Ceramic
• Outlet Inside Diameter: 2.5
• Tube Material: Stainless Steel
• Body Material: Stainless Steel
• Sensor Port Count: 3
• Inlet Mounting Hardware Included: No
• Inlet Inside Diameter: 2.5
• Outlet Mounting Hardware Included: No
• Outlet Type: Weld-On
• Grade Type: Regular

Application: Universal - Requires cut and weld

Notes: OEM grade converter. Cutting and welding required during installation. Not for sale or use in the state of California.

• PRICE: 275.99
• Location:: Federal
• Outlet Quantity: 1
• Hangers Included: No
• Air Tube Count: 0
• Inlet Type: Weld-On
• Heat Shield Attached: Yes
• Body Length: 12in
• Outlet Gasket Included: No
• Clamps Included: No
• Inlet Orientation: Straight
• Inlet Quantity: 1
• Finish: Stainless Steel
• Heat Shield Material: Aluminized Steel
• Universal Or Specific Fit: Universal
• Body Shape: Oval
• Oxygen Sensor Location: Post Converter
• Inlet Gasket Included: No
• Overall Length: 16in
• Body Width: 5.625in
• Substrate Material: Ceramic
• Tube Material: Stainless Steel
• Outlet Inside Diameter: 2.5in
• Body Material: Stainless Steel
• Sensor Port Count: 1
• Inlet Inside Diameter: 2.5in
• Inlet Mounting Hardware Included: No
• Outlet Mounting Hardware Included: No
• Body Height: 3.75in
• Outlet Type: Weld-On
• Outlet Orientation: Straight
• Grade Type: Premium Replacement